linux/drivers/ptp, branch v6.3

ptp_qoriq: fix memory leak in probe()

2023-03-25T02:17:22Z

Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. Fixes: 7f4399ba405b ("ptp_qoriq: fix NULL access if ptp dt node missing") Signed-off-by: SongJingyi Reviewed-by: Dan Carpenter Reviewed-by: Dongliang Mu Link: https://lore.kernel.org/r/20230324031406.1895159-1-u201912584@hust.edu.cn Signed-off-by: Jakub Kicinski

ptp: vclock: use mutex to fix "sleep on atomic" bug

2023-02-23T05:23:48Z

vclocks were using spinlocks to protect access to its timecounter and cyclecounter. Access to timecounter/cyclecounter is backed by the same driver callbacks that are used for non-virtual PHCs, but the usage of the spinlock imposes a new limitation that didn't exist previously: now they're called in atomic context so they mustn't sleep. Some drivers like sfc or ice may sleep on these callbacks, causing errors like "BUG: scheduling while atomic: ptp5/25223/0x00000002" Fix it replacing the vclock's spinlock by a mutex. It fix the mentioned bug and it doesn't introduce longer delays. I've tested synchronizing various different combinations of clocks: - vclock->sysclock - sysclock->vclock - vclock->vclock - hardware PHC in different NIC -> vclock - created 4 vclocks and launch 4 parallel phc2sys processes with lockdep enabled In all cases, comparing the delays reported by phc2sys, they are in the same range of values than before applying the patch. Link: https://lore.kernel.org/netdev/69d0ff33-bd32-6aa5-d36c-fbdc3c01337c@redhat.com/ Fixes: 5d43f951b1ac ("ptp: add ptp virtual clock driver framework") Reported-by: Yalin Li Suggested-by: Richard Cochran Tested-by: Miroslav Lichvar Signed-off-by: Íñigo Huguet Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20230221130616.21837-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski

ptp_qoriq: fix latency in ptp_qoriq_adjtime() operation

2023-01-21T02:20:38Z

1588 driver loses about 1us in adjtime operation at PTP slave This is because adjtime operation uses a slow non-atomic tmr_cnt_read() followed by tmr_cnt_write() operation. In the above sequence, since the timer counter operation keeps incrementing, it leads to latency. The tmr_offset register (which is added to TMR_CNT_H/L register giving the current time) must be programmed with the delta nanoseconds. Signed-off-by: Nikhil Gupta Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230119204034.7969-1-nikhil.gupta@nxp.com Signed-off-by: Jakub Kicinski

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-12-13T23:47:48Z

Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...

net: devlink: let the core report the driver name instead of the drivers

2022-12-01T05:49:38Z

The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol Tested-by: Ido Schimmel # mlxsw Reviewed-by: Jacob Keller Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

ptp: idt82p33: remove PEROUT_ENABLE_OUTPUT_MASK

2022-11-25T10:34:08Z

PEROUT_ENABLE_OUTPUT_MASK was there to allow us to enable/disable all the perout pins. But it is not standard procedure, we will have to discard it. Signed-off-by: Min Li Signed-off-by: David S. Miller

ptp: idt82p33: Add PTP_CLK_REQ_EXTTS support

2022-11-25T10:34:08Z

82P33 family of chips can trigger TOD read/write by external signal from one of the IN12/13/14 pins, which are set user space programs by calling PTP_PIN_SETFUNC through ptp_ioctl Signed-off-by: Min Li Signed-off-by: David S. Miller

ACPI: make remove callback of ACPI driver void

2022-11-23T18:11:22Z

For bus-based driver, device removal is implemented as: 1 device_remove()-> 2 bus->remove()-> 3 driver->remove() Driver core needs no inform from callee(bus driver) about the result of remove callback. In that case, commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned. Now we have the situation that both 1 & 2 of calling chain are void-returned, so it does not make much sense for 3(driver->remove) to return non-void to its caller. So the basic idea behind this change is making remove() callback of any bus-based driver to be void-returned. This change, for itself, is for device drivers based on acpi-bus. Acked-by: Uwe Kleine-König Acked-by: Lee Jones Acked-by: Dmitry Torokhov Reviewed-by: Hans de Goede Signed-off-by: Dawei Li Reviewed-by: Maximilian Luz # for drivers/platform/surface/* Signed-off-by: Rafael J. Wysocki

ptp: remove the .adjfreq interface function

2022-11-11T10:58:39Z

Now that all drivers have been converted to .adjfine, we can remove the .adjfreq from the interface structure. Signed-off-by: Jacob Keller Cc: Richard Cochran Signed-off-by: David S. Miller

ptp: convert remaining drivers to adjfine interface

2022-11-11T10:58:39Z

Convert all remaining drivers that still use .adjfreq to the newer .adjfine implementation. These drivers are not straightforward, as they use non-standard methods of programming their hardware. They are all converted to use scaled_ppm_to_ppb to get the parts per billion value that their logic depends on. Signed-off-by: Jacob Keller Cc: Ariel Elior Cc: Sudarsana Kalluru Cc: Manish Chopra Cc: Derek Chickles Cc: Satanand Burla Cc: Felix Manlunas Cc: Raju Rangoju Cc: Joakim Zhang Cc: Edward Cree Cc: Martin Habets Cc: Richard Cochran Signed-off-by: David S. Miller