linux/drivers/rtc, branch v3.16

drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0

2014-06-20T00:22:39Z

It is only a typo issue, the related commit: "1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()" The related error (for unicore32 with allmodconfig): CC [M] drivers/rtc/rtc-puv3.o drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm': drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev' Signed-off-by: Chen Gang Acked-by: Xuetao Guan Signed-off-by: Xuetao Guan

drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue

2014-06-20T00:22:38Z

It is only a typo issue, the related commit: "1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()" The related error (unicore32 with allmodconfig): CC [M] drivers/rtc/rtc-puv3.o drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie': drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug' Signed-off-by: Chen Gang Acked-by: Xuetao Guan Signed-off-by: Xuetao Guan

rtc: s5m: consolidate two device type switch statements

2014-06-10T22:34:47Z

In probe the configuration of driver for different chipsets was done in two switch (pdata->device_type) statements. Consolidate them into one switch statement to increase code readability. Additionally check the return value of regmap_irq_get_virq and exit probe on error. Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Lee Jones Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: s5m: add support for S2MPS14 RTC

2014-06-10T22:34:47Z

Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Lee Jones Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: s5m: support different register layout

2014-06-10T22:34:47Z

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Add a map of registers used by the driver which differ between the chipsets (S5M876X and S2MPS14). 2. Move code of checking for alarm pending to separate function. Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Lee Jones Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: s5m: use shorter time of register update

2014-06-10T22:34:47Z

Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Lee Jones Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: s5m: remove undocumented time init on first boot

2014-06-10T22:34:47Z

Remove the code for initializing time if this is first boot. The code for detecting first boot uses undocumented field RTC_TCON in RTC_UDR_CON register. According to S5M8767's datasheet this field is reserved. On S2MPS14 it is not documented at all. On device first boot the registers will be initialized with reset value (2000-01-01 00:00:00). The code might work on S5M8763 but still this does not look like a task for RTC driver. Signed-off-by: Krzysztof Kozlowski Cc: Kyungmin Park Cc: Lee Jones Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mfd/rtc: sec/s5m: rename SEC* symbols to S5M

2014-06-10T22:34:46Z

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Rename SEC* symbols to S5M. 2. Add S5M prefix to some of defines which are different between S5M876X and S2MPS14. This is only a rename-like patch, new code is not added. Signed-off-by: Krzysztof Kozlowski Acked-by: Lee Jones Cc: Kyungmin Park Cc: Alessandro Zummo Cc: Sangbeom Kim Cc: Samuel Ortiz Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew Morton) into next

2014-06-06T23:35:10Z

Merge more updates from Andrew Morton: - Most of the rest of MM. This includes "mark remap_file_pages syscall as deprecated" but the actual "replace remap_file_pages syscall with emulation" is held back. I guess we'll need to work out when to pull the trigger on that one. - various minor cleanups to obscure filesystems - the drivers/rtc queue - hfsplus updates - ufs, hpfs, fatfs, affs, reiserfs - Documentation/ - signals - procfs - cpu hotplug - lib/idr.c - rapidio - sysctl - ipc updates * emailed patches from Andrew Morton : (171 commits) ufs: sb mutex merge + mutex_destroy powerpc: update comments for generic idle conversion cris: update comments for generic idle conversion idle: remove cpu_idle() forward declarations nbd: zero from and len fields in NBD_CMD_DISCONNECT. mm: convert some level-less printks to pr_* MAINTAINERS: adi-buildroot-devel is moderated MAINTAINERS: add linux-api for review of API/ABI changes mm/kmemleak-test.c: use pr_fmt for logging fs/dlm/debug_fs.c: replace seq_printf by seq_puts fs/dlm/lockspace.c: convert simple_str to kstr fs/dlm/config.c: convert simple_str to kstr mm: mark remap_file_pages() syscall as deprecated mm: memcontrol: remove unnecessary memcg argument from soft limit functions mm: memcontrol: clean up memcg zoneinfo lookup mm/memblock.c: call kmemleak directly from memblock_(alloc|free) mm/mempool.c: update the kmemleak stack trace for mempool allocations lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations mm: introduce kmemleak_update_trace() mm/kmemleak.c: use %u to print ->checksum ...

drivers/rtc/rtc-pxa.c: make of_device_id array const

2014-06-06T23:08:09Z

Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds