linux/drivers/scsi, branch v3.14

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-03-25T00:07:24Z

Pull networking fixes from David Miller: 1) OpenVswitch's lookup_datapath() returns error pointers, so don't check against NULL. From Jiri Pirko. 2) pfkey_compile_policy() code path tries to do a GFP_KERNEL allocation under RCU locks, fix by using GFP_ATOMIC when necessary. From Nikolay Aleksandrov. 3) phy_suspend() indirectly passes uninitialized data into the ethtool get wake-on-land implementations. Fix from Sebastian Hesselbarth. 4) CPSW driver unregisters CPTS twice, fix from Benedikt Spranger. 5) If SKB allocation of reply packet fails, vxlan's arp_reduce() defers a NULL pointer. Fix from David Stevens. 6) IPV6 neigh handling in vxlan doesn't validate the destination address properly, and it builds a packet with the src and dst reversed. Fix also from David Stevens. 7) Fix spinlock recursion during subscription failures in TIPC stack, from Erik Hugne. 8) Revert buggy conversion of davinci_emac to devm_request_irq, from Chrstian Riesch. 9) Wrong flags passed into forwarding database netlink notifications, from Nicolas Dichtel. 10) The netpoll neighbour soliciation handler checks wrong ethertype, needs to be ETH_P_IPV6 rather than ETH_P_ARP. Fix from Li RongQing. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) tipc: fix spinlock recursion bug for failed subscriptions vxlan: fix nonfunctional neigh_reduce() net: davinci_emac: Fix rollback of emac_dev_open() net: davinci_emac: Replace devm_request_irq with request_irq netpoll: fix the skb check in pkt_is_ns net: micrel : ks8851-ml: add vdd-supply support ip6mr: fix mfc notification flags ipmr: fix mfc notification flags rtnetlink: fix fdb notification flags tcp: syncookies: do not use getnstimeofday() netlink: fix setsockopt in mmap examples in documentation openvswitch: Correctly report flow used times for first 5 minutes after boot. via-rhine: Disable device in error path ATHEROS-ATL1E: Convert iounmap to pci_iounmap vxlan: fix potential NULL dereference in arp_reduce() cnic: Update version to 2.5.20 and copyright year. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Use proper ulp_ops for per device operations. net: cdc_ncm: fix control message ordering ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly ...

cnic,bnx2i,bnx2fc: Fix inconsistent use of page size

2014-03-18T20:02:16Z

The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan Signed-off-by: Eddie Wai Signed-off-by: David S. Miller

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2014-03-15T19:41:53Z

Pull SCSI fixes from James Bottomley: "This is a set of six fixes. Two are instant crash/null deref types (storvsc and isci). The two qla2xxx are initialisation problems that cause MSI-X failures and card misdetection, the isci erroneous macro is actually illegal C that's causing a miscompile with certain gcc versions and the be2iscsi bad if expression is a static checker fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] storvsc: NULL pointer dereference fix [SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx [SCSI] isci: correct erroneous for_each_isci_host macro [SCSI] isci: fix reset timeout handling [SCSI] be2iscsi: fix bad if expression [SCSI] qla2xxx: Fix multiqueue MSI-X registration.

[SCSI] storvsc: NULL pointer dereference fix

2014-03-12T09:16:54Z

If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak Signed-off-by: Thomas Abraham Reviewed-by: Jiri Kosina Acked-by: K. Y. Srinivasan Cc: stable@vger.kernel.org Signed-off-by: James Bottomley

[SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx

2014-03-10T08:51:30Z

Cc: stable@vger.kernel.org Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley

[SCSI] isci: correct erroneous for_each_isci_host macro

2014-03-10T08:49:39Z

In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[] [] __list_add+0x1b/0xc0 Call Trace: [] __mutex_lock_slowpath+0x114/0x1b0 [] mutex_lock+0x1f/0x30 [] sas_disable_events+0x1b/0x50 [libsas] [] sas_unregister_ha+0x18/0x60 [libsas] [] isci_unregister+0x1e/0x40 [isci] [] isci_pci_remove+0x5d/0x100 [isci] [] pci_device_remove+0x3b/0xb0 [] __device_release_driver+0x7f/0xf0 [] driver_detach+0xa8/0xb0 [] bus_remove_driver+0x9b/0x120 [] driver_unregister+0x2c/0x50 [] pci_unregister_driver+0x23/0x80 [] isci_exit+0x10/0x1e [isci] [] SyS_delete_module+0x16b/0x2d0 [] ? do_notify_resume+0x61/0xa0 [] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau Reviewed-by: Maciej Patelczyk Tested-by: Lukasz Dorau Cc: Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: fix reset timeout handling

2014-03-10T08:48:16Z

Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Cc: Acked-by: Lukasz Dorau Reported-by: David Milburn Reported-by: Xun Ni Tested-by: Xun Ni Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] be2iscsi: fix bad if expression

2014-03-10T08:44:31Z

https://bugzilla.kernel.org/show_bug.cgi?id=67091 Cc: Jayamohan Kallickal Signed-off-by: James Bottomley

[SCSI] qla2xxx: Fix multiqueue MSI-X registration.

2014-03-10T08:33:21Z

This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Cc: Signed-off-by: Chad Dupuis Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-03-02T03:33:09Z

Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the series are bugfixes for qla2xxx target NPIV support that went in for v3.14-rc1. Also included are a few DIF related fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi protocol version related fix from Venkatesh. Also just a heads up that a series to address a number of issues with iser-target active I/O reset/shutdown is still being tested, and will be included in a separate -rc6 PULL request" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Check LUN structure byte 0 is set to 1, per spec qla2xxx: Fix kernel panic on selective retransmission request Target/sbc: Don't use sg as iterator in sbc_verify_read target: Add DIF sense codes in transport_generic_request_failure target/sbc: Fix sbc_dif_copy_prot addr offset bug tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs tcm_qla2xxx: Perform configfs depend/undepend for base_tpg tcm_qla2xxx: Add NPIV specific enable/disable attribute logic qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown qla2xxx: Fix qlt_lport_register base_vha callback race