linux/drivers/scsi, branch v4.0

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2015-04-11T00:41:47Z

Pull SCSI fixes from James Bottomley: "This is our remaining set of three fixes for 4.0: two oops fixes(one for cable pulls triggering oopses and the other be2iscsi specific) and one warn on in sysfs on multipath devices using enclosures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Defer processing of REQ_PREEMPT requests for blocked devices be2iscsi: Fix kernel panic when device initialization fails enclosure: fix WARN_ON removing an adapter in multi-path devices

Defer processing of REQ_PREEMPT requests for blocked devices

2015-04-08T16:41:41Z

SCSI transport drivers and SCSI LLDs block a SCSI device if the transport layer is not operational. This means that in this state no requests should be processed, even if the REQ_PREEMPT flag has been set. This patch avoids that a rescan shortly after a cable pull sporadically triggers the following kernel oops: BUG: unable to handle kernel paging request at ffffc9001a6bc084 IP: [] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib] Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100) Call Trace: [] srp_post_send+0x65/0x70 [ib_srp] [] srp_queuecommand+0x1cf/0x3e0 [ib_srp] [] scsi_dispatch_cmd+0x101/0x280 [scsi_mod] [] scsi_request_fn+0x411/0x4d0 [scsi_mod] [] __blk_run_queue+0x27/0x30 [] blk_execute_rq_nowait+0x82/0x110 [] blk_execute_rq+0x62/0xf0 [] scsi_execute+0xe8/0x190 [scsi_mod] [] scsi_execute_req+0xa3/0x130 [scsi_mod] [] scsi_probe_lun+0x17a/0x450 [scsi_mod] [] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod] [] __scsi_scan_target+0xdf/0x1f0 [scsi_mod] [] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod] [] scsi_scan+0xdb/0xe0 [scsi_mod] [] store_scan+0x13/0x20 [scsi_mod] [] sysfs_write_file+0xcb/0x160 [] vfs_write+0xce/0x140 [] sys_write+0x53/0xa0 [] system_call_fastpath+0x16/0x1b [<00007f611c9d9300>] 0x7f611c9d92ff Reported-by: Max Gurtuvoy Signed-off-by: Bart Van Assche Reviewed-by: Mike Christie Cc: Signed-off-by: James Bottomley

be2iscsi: Fix kernel panic when device initialization fails

2015-04-08T16:40:57Z

Kernel panic was happening as iscsi_host_remove() was called on a host which was not yet added. Signed-off-by: John Soni Jose Reviewed-by: Mike Christie Cc: Signed-off-by: James Bottomley

Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2015-03-25T00:08:29Z

Pull libata fix from Tejun Heo: "One patch to fix a regression from the recent switch to blk-mq tag allocation which can cause oops on SAS-attached SATA drives" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: Add a new flag to destinguish sas controller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-03-21T18:24:38Z

Pull SCSI target fixes from Nicholas Bellinger: "Here are current target-pending fixes for v4.0-rc5 code that have made their way into the queue over the last weeks. The fixes this round include: - Fix long-standing iser-target logout bug related to early conn_logout_comp completion, resulting in iscsi_conn use-after-tree OOpsen. (Sagi + nab) - Fix long-standing tcm_fc bug in ft_invl_hw_context() failure handing for DDP hw offload. (DanC) - Fix incorrect use of unprotected __transport_register_session() in tcm_qla2xxx + other single local se_node_acl fabrics. (Bart) - Fix reference leak in target_submit_cmd() -> target_get_sess_cmd() for ack_kref=1 failure path. (Bart) - Fix pSCSI backend ->get_device_type() statistics OOPs with un-configured device. (Olaf + nab) - Fix virtual LUN=0 target_configure_device failure OOPs at modprobe time. (Claudio + nab) - Fix FUA write false positive failure regression in v4.0-rc1 code. (Christophe Vu-Brugier + HCH)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0 target: Fix virtual LUN=0 target_configure_device failure OOPs target/pscsi: Fix NULL pointer dereference in get_device_type tcm_fc: missing curly braces in ft_invl_hw_context() target: Fix reference leak in target_get_sess_cmd() error path loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session tcm_qla2xxx: Fix incorrect use of __transport_register_session iscsi-target: Avoid early conn_logout_comp for iser connections Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target" target: Disallow changing of WRITE cache/FUA attrs after export

tcm_qla2xxx: Fix incorrect use of __transport_register_session

2015-03-20T06:14:14Z

This patch fixes the incorrect use of __transport_register_session() in tcm_qla2xxx_check_initiator_node_acl() code, that does not perform explicit se_tpg->session_lock when accessing se_tpg->tpg_sess_list to add new se_sess nodes. Given that tcm_qla2xxx_check_initiator_node_acl() is not called with qla_hw->hardware_lock held for all accesses of ->tpg_sess_list, the code should be using transport_register_session() instead. Signed-off-by: Bart Van Assche Cc: Giridhar Malavali Cc: Quinn Tran Cc: # 3.5+ Signed-off-by: Nicholas Bellinger

ata: Add a new flag to destinguish sas controller

2015-03-19T18:14:43Z

SAS controller has its own tag allocation, which doesn't directly match to ATA tag, so SAS and SATA have different code path for ata tags. Originally we use port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set ->scsi_host too, so we can't use it for the destinguish, we add a new flag for this purpose. Without this patch, the following oops can happen because scsi-mq uses a host-wide tag map shared among all devices with some integer tag values >= ATA_MAX_QUEUE. These unexpectedly high tag values cause __ata_qc_from_tag() to return NULL, which is then dereferenced in ata_qc_new_init(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [] ata_qc_new_init+0x3e/0x120 PGD 32adf0067 PUD 32adf1067 PMD 0 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp eeprom w83795 i2c_i801 CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1 Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b 05/04/12 task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000 RIP: 0010:[] [] ata_qc_new_init+0x3e/0x120 RSP: 0018:ffff88032a067858 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230 RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000 R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000 FS: 0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0 Stack: ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978 ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909 Call Trace: [] ata_scsi_translate+0x3d/0x1b0 [] ata_sas_queuecmd+0x149/0x2a0 [] sas_queuecommand+0xa0/0x1f0 [libsas] [] scsi_dispatch_cmd+0xd4/0x1a0 [] scsi_queue_rq+0x66f/0x7f0 [] __blk_mq_run_hw_queue+0x208/0x3f0 [] blk_mq_run_hw_queue+0x88/0xc0 [] blk_mq_insert_request+0xc4/0x130 [] blk_execute_rq_nowait+0x73/0x160 [] sg_common_write+0x3da/0x720 [sg] [] sg_new_write+0x250/0x360 [sg] [] sg_write+0x13b/0x450 [sg] [] vfs_write+0xd1/0x1b0 [] SyS_write+0x54/0xc0 [] system_call_fastpath+0x12/0x17 tj: updated description. Fixes: 12cb5ce101ab ("libata: use blk taging") Reported-and-tested-by: Tony Battersby Signed-off-by: Shaohua Li Signed-off-by: Tejun Heo

libsas: Fix Kernel Crash in smp_execute_task

2015-03-07T04:51:29Z

This crash was reported: [ 366.947370] sd 3:0:1:0: [sdb] Spinning up disk.... [ 368.804046] BUG: unable to handle kernel NULL pointer dereference at (null) [ 368.804072] IP: [] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804098] PGD 0 [ 368.804114] Oops: 0002 [#1] SMP [ 368.804143] CPU 1 [ 368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common [ 368.804749] [ 368.804764] Pid: 392, comm: kworker/u:3 Tainted: P W O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920 [ 368.804802] RIP: 0010:[] [] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804827] RSP: 0018:ffff880117001cc0 EFLAGS: 00010246 [ 368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420 [ 368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4 [ 368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe [ 368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4 [ 368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8 [ 368.804916] FS: 0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 [ 368.804931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0 [ 368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0) [ 368.805009] Stack: [ 368.805017] ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c [ 368.805062] 000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000 [ 368.805100] ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac [ 368.805135] Call Trace: [ 368.805153] [] ? up+0xb/0x33 [ 368.805168] [] ? mutex_lock+0x16/0x25 [ 368.805194] [] ? smp_execute_task+0x4e/0x222 [libsas] [ 368.805217] [] ? sas_find_bcast_dev+0x3c/0x15d [libsas] [ 368.805240] [] ? sas_find_bcast_dev+0x6f/0x15d [libsas] [ 368.805264] [] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas] [ 368.805280] [] ? printk+0x43/0x48 [ 368.805296] [] ? _raw_spin_unlock_irqrestore+0xc/0xd [ 368.805318] [] ? sas_revalidate_domain+0x85/0xb6 [libsas] [ 368.805336] [] ? process_one_work+0x151/0x27c [ 368.805351] [] ? worker_thread+0xbb/0x152 [ 368.805366] [] ? manage_workers.isra.29+0x163/0x163 [ 368.805382] [] ? kthread+0x79/0x81 [ 368.805399] [] ? kernel_thread_helper+0x4/0x10 [ 368.805416] [] ? kthread_flush_work_fn+0x9/0x9 [ 368.805431] [] ? gs_change+0x13/0x13 [ 368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41 [ 368.805851] RIP [] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.805877] RSP [ 368.805886] CR2: 0000000000000000 [ 368.805899] ---[ end trace b720682065d8f4cc ]--- It's directly caused by 89d3cf6 [SCSI] libsas: add mutex for SMP task execution, but shows a deeper cause: expander functions expect to be able to cast to and treat domain devices as expanders. The correct fix is to only do expander discover when we know we've got an expander device to avoid wrongly casting a non-expander device. Reported-by: Praveen Murali Tested-by: Praveen Murali Cc: stable@vger.kernel.org Signed-off-by: James Bottomley

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2015-02-22T03:16:42Z

Pull misc SCSI patches from James Bottomley: "This is a short patch set representing a couple of left overs from the merge window (debug removal and MAINTAINER changes). Plus one merge window regression (the local workqueue for hpsa) and a set of bug fixes for several issues (two for scsi-mq and the rest an assortment of long standing stuff, all cc'd to stable)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sg: fix EWOULDBLOCK errors with scsi-mq sg: fix unkillable I/O wait deadlock with scsi-mq sg: fix read() error reporting wd719x: add missing .module to wd719x_template hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. fcoe: Transition maintainership to Vasu am53c974: remove left-over debugging code

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-02-21T21:21:19Z

Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c logic, and signal VERSION_1 support (MST + Viro + nab) - Fix iscsi/iser-target to remove problematic active_ts_set usage (Gavin Guo) - Update iscsi/iser-target to support multi-sequence sendtargets (Sagi) - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec) - Add missing WRITE_SAME end-of-device sanity check (Bart) - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab) - Other various minor SPC/SBC compliance fixes based upon Ronnie Sahlberg test suite (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits) target: Set LBPWS10 bit in Logical Block Provisioning EVPD target: Fail UNMAP when emulate_tpu=0 target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0 target: Add sanity checks for DPO/FUA bit usage target: Perform PROTECT sanity checks for WRITE_SAME target: Fail I/O with PROTECT bit when protection is unsupported target: Check for LBA + sectors wrap-around in sbc_parse_cdb target: Add missing WRITE_SAME end-of-device sanity check iscsi-target: Avoid IN_LOGOUT failure case for iser-target target: Fix PR_APTPL_BUF_LEN buffer size limitation iscsi-target: Drop problematic active_ts_list usage iscsi/iser-target: Support multi-sequence sendtargets text response iser-target: Remove duplicate function names vhost/scsi: potential memory corruption vhost/scsi: Global tcm_vhost -> vhost_scsi rename vhost/scsi: Drop left-over scsi_tcq.h include vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len ...