linux/drivers/scsi, branch v5.8

scsi: core: Run queue in case of I/O resource contention failure

2020-07-21T01:38:20Z

I/O requests may be held in scheduler queue because of resource contention. The starvation scenario was handled properly in the regular completion path but we failed to account for it during I/O submission. This lead to the hang captured below. Make sure we run the queue when resource contention is encountered in the submission path. [ 39.054963] scsi 13:0:0:0: rejecting I/O to dead device [ 39.058700] scsi 13:0:0:0: rejecting I/O to dead device [ 39.087855] sd 13:0:0:1: [sdd] Synchronizing SCSI cache [ 39.088909] scsi 13:0:0:1: rejecting I/O to dead device [ 39.095351] scsi 13:0:0:1: rejecting I/O to dead device [ 39.096962] scsi 13:0:0:1: rejecting I/O to dead device [ 247.021859] INFO: task scsi-stress-rem:813 blocked for more than 122 seconds. [ 247.023258] Not tainted 5.8.0-rc2 #8 [ 247.024069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.025331] scsi-stress-rem D 0 813 802 0x00004000 [ 247.025334] Call Trace: [ 247.025354] __schedule+0x504/0x55f [ 247.027987] schedule+0x72/0xa8 [ 247.027991] blk_mq_freeze_queue_wait+0x63/0x8c [ 247.027994] ? do_wait_intr_irq+0x7a/0x7a [ 247.027996] blk_cleanup_queue+0x4b/0xc9 [ 247.028000] __scsi_remove_device+0xf6/0x14e [ 247.028002] scsi_remove_device+0x21/0x2b [ 247.029037] sdev_store_delete+0x58/0x7c [ 247.029041] kernfs_fop_write+0x10d/0x14f [ 247.031281] vfs_write+0xa2/0xdf [ 247.032670] ksys_write+0x6b/0xb3 [ 247.032673] do_syscall_64+0x56/0x82 [ 247.034053] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 247.034059] RIP: 0033:0x7f69f39e9008 [ 247.036330] Code: Bad RIP value. [ 247.036331] RSP: 002b:00007ffdd8116498 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.037613] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f69f39e9008 [ 247.039714] RDX: 0000000000000002 RSI: 000055cde92a0ab0 RDI: 0000000000000001 [ 247.039715] RBP: 000055cde92a0ab0 R08: 000000000000000a R09: 00007f69f3a79e80 [ 247.039716] R10: 000000000000000a R11: 0000000000000246 R12: 00007f69f3abb780 [ 247.039717] R13: 0000000000000002 R14: 00007f69f3ab6740 R15: 0000000000000002 Link: https://lore.kernel.org/r/20200720025435.812030-1-ming.lei@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen

scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro

2020-07-15T20:16:45Z

As the ENABLE_IRQ_POLL macro is undefined, the check for ENABLE_IRQ_POLL macro in ISR will always be false. This leads to irq polling being non-functional. Remove ENABLE_IRQ_POLL check from ISR. Link: https://lore.kernel.org/r/20200715120153.20512-1-chandrakanth.patil@broadcom.com Fixes: a6ffd5bf6819 ("scsi: megaraid_sas: Call disable_irq from process IRQ") Cc: # v5.3+ Signed-off-by: Chandrakanth Patil Signed-off-by: Kashyap Desai Signed-off-by: Martin K. Petersen

scsi: dh: Add Fujitsu device to devinfo and dh lists

2020-07-08T05:16:23Z

Add FUJITSU ETERNUS_AHB Link: https://lore.kernel.org/r/DM6PR06MB5276CCA765336BD312C4282E8C660@DM6PR06MB5276.namprd06.prod.outlook.com Signed-off-by: Steve Schremmer Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Fix error returns in BRM_status_show

2020-07-08T03:46:38Z

BRM_status_show() has several error branches, but none of them record the error in the error return. Also while at it remove the manual mutex_unlock() of the pci_access_mutex in case of an ongoing pci error recovery or host removal and jump to the cleanup label instead. Note: We can safely jump to out from here as io_unit_pg3 is initialized to NULL and if it hasn't been allocated, kfree() skips the NULL pointer. [mkp: compilation warning] Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com Reviewed-by: Damien Le Moal Acked-by: Sreekanth Reddy Signed-off-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Fix unlock imbalance

2020-07-03T03:18:39Z

In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.com Reviewed-by: Johannes Thumshirn Acked-by: Sreekanth Reddy Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen

scsi: iscsi: Change iSCSI workqueue max_active back to 1

2020-07-03T03:13:54Z

Commit 3ce419662dd4 ("scsi: iscsi: Register sysfs for iscsi workqueue") enabled 'cpumask' support for iSCSI workqueues. However, it is unnecessary to set max_active = 2 since 'cpumask' can still be modified when max_active is 1. This patch sets max_active to 1 so as to keep the same behaviour as before. Link: https://lore.kernel.org/r/20200701030745.16897-1-bob.liu@oracle.com Reviewed-by: Mike Christie Signed-off-by: Bob Liu Signed-off-by: Martin K. Petersen

scsi: scsi_transport_spi: Fix function pointer check

2020-06-30T01:34:35Z

clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com Reviewed-by: James Bottomley Signed-off-by: Tom Rix Signed-off-by: Martin K. Petersen

scsi: libfc: Skip additional kref updating work event

2020-06-27T02:19:35Z

When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1. kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in INIT state kernel: host0: rport fffce5: Port is Ready kernel: host0: rport fffce5: Received PRLI request while in state Ready kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host0: rport fffce5: Received LOGO request while in state Ready kernel: host0: rport fffce5: Delete port kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy kernel: host0: rport fffce5: work event 3 kernel: host0: rport fffce5: lld callback ev 3 kernel: host0: rport fffce5: work delete Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen

scsi: libfc: Handling of extra kref

2020-06-27T02:13:48Z

Handling of extra kref which is done by lookup table in case rdata is already present in list. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport. kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in INIT state kernel: host1: rport fffce5: Port is Ready kernel: host1: rport fffce5: Received PRLI request while in state Ready kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host1: rport fffce5: Received LOGO request while in state Ready kernel: host1: rport fffce5: Delete port kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen

scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()

2020-06-27T02:08:30Z

This code doesn't make sense unless the correct "fcport" was found. Link: https://lore.kernel.org/r/20200619143041.GD267142@mwanda Fixes: 9dd9686b1419 ("scsi: qla2xxx: Add changes for devloss timeout in driver") Reviewed-by: Himanshu Madhani Reviewed-by: Shyam Sundar Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen