linux/drivers/soc, branch v5.12

Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-04-18T20:23:26Z

Pull ARM SoC fixes from Arnd Bergmann: "Another smaller set of fixes for three of the Arm platforms: TI OMAP: Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Qualcomm Snapdragon: This bypasses the recently introduced interconnect handling in the GENI (serial engine) driver when running off ACPI, as this causes the GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and touchpad. Allwinner: One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some MAINTAINERS maintainance, and a clk / reset switch to our headers" * tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference MAINTAINERS: Match on allwinner keyword MAINTAINERS: Add our new mailing-list arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() soc: qcom: geni: shield geni_icc_get() for ACPI boot

Merge tag 'qcom-drivers-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

2021-04-08T15:36:41Z

Qualcomm fix for 5.12 This bypasses the, recently introduced, interconnect handling in the GENI (serial engine) driver when running off ACPI, as this causes the GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and touchpad. * tag 'qcom-drivers-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: geni: shield geni_icc_get() for ACPI boot Link: https://lore.kernel.org/r/20210404155604.712236-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann

Merge tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-04-07T16:26:50Z

Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes again are devicetree fixes, but there are also five trivial build fixes for issues I found when test building with gcc-11 or when running 'make W=1', and some OMAP platform specific code fixups. Broadcom: - One revert for a Raspberry pi interrupt controller change that caused a regression. TI OMAP: - Remove unused duplicate sha2md5_fck clock node that can race with the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks - Add aliases for omap4/5 mmc to put the slots back into the right order again - Fix typo for bionic voltage controllers that accidentally use mpu for all instances instead of mpu, core and iva - Fix random hangs for droid4 caused by missing fix from TI Android kernel tree to do a dummy smc call on cpuidle wakeup path NXP i.MX: - Fix a system failure on imx6qdl-phytec-pfla02 board when booting from SD, by adding missing vmmc supply for SD interfaces. - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition. Marvell mvebu: - Fix storm interrupt on Turris Omnia - Enable hardware buffer management as it should be ... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone" * tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin ARM: dts: turris-omnia: fix hardware buffer management Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts" ARM: mvebu: avoid clang -Wtautological-constant warning ARM: pxa: mainstone: avoid -Woverride-init warning ARM: omap1: fix building with clang IAS soc/fsl: qbman: fix conflicting alignment attributes ARM: keystone: fix integer overflow warning ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"

Merge tag 'for-linus' of git://github.com/openrisc/linux

2021-04-03T22:42:45Z

Pull OpenRISC fix from Stafford Horne: "Fix duplicate header include in Litex SOC driver" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Remove duplicated header file inclusion

soc: litex: Remove duplicated header file inclusion

2021-04-03T20:46:46Z

The header file is already included above and can be removed here. Signed-off-by: Zhen Lei Signed-off-by: Mateusz Holenko Signed-off-by: Stafford Horne

Merge tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-04-03T17:00:53Z

Pull serial driver fix from Greg KH: "Here is a single serial driver fix for 5.12-rc6. Is is a revert of a change that showed up in 5.9 that has been reported to cause problems. It has been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: soc: qcom-geni-se: Cleanup the code to remove proxy votes

soc/fsl: qbman: fix conflicting alignment attributes

2021-04-01T14:32:37Z

When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann

soc: qcom-geni-se: Cleanup the code to remove proxy votes

2021-03-26T14:16:05Z

This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi Signed-off-by: Akash Asthana Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2021-03-18T22:52:27Z

Fixes for omaps for v5.12-rc cycle Regression fixes for multiple issues found mostly caused by recent changes to drop legacy platform data and and starting to use the new prm driver reset controller: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva * tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD Link: https://lore.kernel.org/r/pull-1614868603-800959@atomide.com Signed-off-by: Arnd Bergmann

soc: qcom: geni: shield geni_icc_get() for ACPI boot

2021-03-12T02:22:05Z

Currently, GENI devices like i2c-qcom-geni fails to probe in ACPI boot, if interconnect support is enabled. That's because interconnect driver only supports DT right now. As interconnect is not necessarily required for basic function of GENI devices, let's shield geni_icc_get() call, and then all other ICC calls become nop due to NULL icc_path, so that GENI devices keep working for ACPI boot. Reviewed-by: Bjorn Andersson Signed-off-by: Shawn Guo Link: https://lore.kernel.org/r/20210114112928.11368-1-shawn.guo@linaro.org Signed-off-by: Bjorn Andersson