linux/drivers/soc, branch v5.8

Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2020-07-16T20:08:07Z

i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann

Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes

2020-07-16T20:07:48Z

Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann

soc: imx: check ls1021a

2020-07-13T08:28:02Z

fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could not use the soc driver which will break caam on ls1021a platform. So directly return if it is compatible with fsl,ls1021a. Fixes: 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx") Signed-off-by: Peng Fan Tested-by: Horia Geantă Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo

soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's

2020-06-29T23:00:53Z

Correct the SoC revision and package bits/mask values for S905D3/X3 to detect a wider range of observed SoC IDs, and tweak sort order for A311D/S922X. S905X3 05 0000 0101 (SEI610 initial devices) S905X3 10 0001 0000 (ODROID-C4 and recent Android boxes) S905X3 50 0101 0000 (SEI610 later revisions) S905D3 04 0000 0100 (VIM3L devices in kernelci) S905D3 b0 1011 0000 (VIM3L initial production) Fixes commit c9cc9bec36d0 ("soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs") Suggested-by: Neil Armstrong Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20200609081318.28023-1-christianshewitt@gmail.com

Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-28T21:57:14Z

Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...

Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2020-06-28T12:48:19Z

i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann

Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2020-06-28T12:41:55Z

Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann

soc: imx8m: fix build warning

2020-06-24T06:33:28Z

Fix the build warning with x86_64-randconfig >> drivers/soc/imx/soc-imx8m.c:150:34: warning: unused variable >> 'imx8_soc_match' [-Wunused-const-variable] static const struct of_device_id imx8_soc_match[] = { ^ Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Reported-by: kernel test robot Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

soc: imx8m: Correct i.MX8MP UID fuse offset

2020-06-23T11:45:21Z

Correct i.MX8MP UID fuse offset according to fuse map: UID_LOW: 0x420 UID_HIGH: 0x430 Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support") Signed-off-by: Anson Huang Reviewed-by: Iuliana Prodan Signed-off-by: Shawn Guo

soc: ti: Replace zero-length array with flexible-array

2020-06-16T04:08:32Z

There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva