linux/drivers/spi, branch v4.7

Merge remote-tracking branches 'spi/fix/ep93xx', 'spi/fix/rockchip', 'spi/fix/sunxi' and 'spi/fix/ti-qspi' into spi-linus

2016-06-30T12:17:29Z

spi: sunxi: fix transfer timeout

2016-06-14T09:05:18Z

The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

spi: sun4i: fix FIFO limit

2016-06-14T09:05:08Z

When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

spi: rockchip: Signal unfinished DMA transfers

2016-06-08T10:56:54Z

When using DMA, the transfer_one callback should return 1 because the transfer hasn't finished yet. A previous commit changed the function to return 0 when the DMA channels were correctly prepared. This manifested in Veyron boards with this message: [ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time Fixes: ea9849113343 ("spi: rockchip: check return value of dmaengine_prep_slave_sg") Signed-off-by: Tomeu Vizoso Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

spi: spi-ti-qspi: Suspend the queue before removing the device

2016-05-31T17:51:58Z

Before disabling the pm_runtime, we must ensure that there is no transfer in progress nor will a new one be started. Otherwise the message pump will fail and in the end, the process requesting the transfer will be stuck. This behavior has been observed when transferring data from a SPI flash with dd while removing the module on a DRA7x-evm. Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown

Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2016-05-28T19:23:12Z

Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ...

Merge branch 'asoc-fix-ep93xx' into spi-fix-ep93xx

2016-05-26T10:13:12Z

Merge remote-tracking branches 'asoc/fix/ak4642', 'asoc/fix/ep93xx', 'asoc/fix/kirkwood' and 'asoc/fix/twl6040' into asoc-linus

2016-05-25T18:18:00Z

Merge tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2016-05-24T18:12:32Z

Pull spi updates from Mark Brown: "Another quiet release for SPI, almost entirely driver specific changes with the diffstat dominated by two new drivers which are about two thirds of it in terms of lines of code: - new drivers for PIC32 standard and SQI controllers - the Cadence driver has had runtime PM support added and quite a few fixes and cleanups - flash-specific accelerated path support now has a feature query interface - the pxa2xx driver has been moved to use the core DMA mapping support" * tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits) spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops' spi: dw-pci: Spelling s/paltforms/platforms/g spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup spi: Fix simple typo s/impelment/implement spi: rockchip: potential NULL dereference on error spi: zynqmp: disable clocks in error paths spi: Drop unnecessary dependencies on relaxed I/O accessors spi: qup: Add spi_master_put in remove function spi: qup: Handle clocks in pm_runtime suspend and resume spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths spi: st-ssc4: Allow compile test build spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel spi: davinci: Use dma_request_chan() for requesting DMA channel spi: pic32: Fix checking return value of devm_ioremap_resource spi: spi-fsl-dspi: Update DT binding documentation spi: Drop duplicate code to set master->dev.parent spi: pic32: Set proper bits_per_word_mask spi: return error if kmap'd buffers passed to spi_map_buf() spi: core: add hook flash_read_supported to spi_master spi: pic32-sqi: silence array overflow warning ...

spi: spi-ep93xx: Fix the PTR_ERR() argument

2016-05-24T15:54:50Z

PTR_ERR should access the value just tested by IS_ERR. The semantic patch that makes this change is available in scripts/coccinelle/tests/odd_ptr_err.cocci. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown