linux/drivers/ssb, branch v3.0

ssb: fix init regression of hostmode PCI core

2011-07-07T17:06:08Z

Our workarounds seem to be clientmode PCI specific. Using SPROM workaround on SoC resulted in Oops: Data bus error, epc == 8017ed58, ra == 80225838 Oops[#1]: Cpu 0 $ 0 : 00000000 10008000 b8000000 00000001 $ 4 : 80293b5c 00000caa ffffffff 00000000 $ 8 : 0000000a 00000003 00000001 696d6d20 $12 : ffffffff 00000000 00000000 ffffffff $16 : 802d0140 b8004800 802c0000 00000000 $20 : 00000000 802c0000 00000000 802d04d4 $24 : 00000018 80151a00 $28 : 81816000 81817df8 8029bda0 80225838 Hi : 00000000 Lo : 00000000 epc : 8017ed58 ssb_ssb_read16+0x48/0x60 Not tainted ra : 80225838 ssb_pcicore_init+0x54/0x3b4 Reported-by: Hauke Mehrtens Signed-off-by: Rafał Miłecki Tested-by: Hauke Mehrtens Signed-off-by: John W. Linville

ssb: fix PCI(e) driver regression causing oops on PCI cards

2011-06-03T18:19:49Z

We were incorrectly executing PCIe specific workarounds on PCI cards. This resulted in: Machine check in kernel mode. Caused by (from SRR1=149030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] Reported-by: Andreas Schwab Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

2011-05-20T20:43:21Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.

SSB: Change fallback sprom to callback mechanism.

2011-05-19T08:55:47Z

Some embedded devices like the Netgear WNDR3300 have two SSB based cards without an own sprom on the pci bus. We have to provide two different fallback sproms for these and this was not possible with the old solution. In the bcm47xx architecture the sprom data is stored in the nvram in the main flash storage. The architecture code will be able to fill the sprom with the stored data based on the bus where the device was found. The bcm63xx code should do the same thing as before, just using the new API. Acked-by: Michael Buesch Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Florian Fainelli Signed-off-by: Hauke Mehrtens Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2362/ Signed-off-by: Ralf Baechle

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

2011-05-16T23:32:19Z

Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h

ssb: fix pcicore build breakage

2011-05-13T19:05:46Z

drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function) drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function) drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev' Reported-by: Randy Dunlap Signed-off-by: John W. Linville

ssb: move ssb_commit_settings and export it

2011-05-11T18:50:41Z

Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

ssb: update list of devices supporting multiple 80211 cores

2011-05-11T14:17:17Z

Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki Tested-by: Larry Finger Acked-by: Larry Finger Signed-off-by: John W. Linville

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

2011-05-05T17:32:35Z

Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c

ssb: cc: prepare clockmode support for cores rev 10+

2011-05-02T18:49:14Z

Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville