linux/drivers/staging/Makefile, branch v4.5

staging: ft1000: remove obsolete driver

2015-10-25T02:19:43Z

Remove support for Qleadtek Flash-OFDM modems. Telecom carrier is discontinuing service for the radio technology. See http://www.gtigroup.org/news/ind/2015-08-18/6996.html. Suggested-by: Arnd Bergmann Signed-off-by: Deepa Dinamani Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-09-09T15:33:31Z

Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...

Staging: Add staging/rdma directory and update MAINTAINERS

2015-08-29T02:54:49Z

Create the rdma directory in the staging area for use as we deprecate some older drivers and as we bring in some new drivers that are in need of work. Update the MAINTAINERS file so that updates to these files go to linux-rdma@vger.kernel.org. Expected lifespan of this directory is three releases for any deprecated drivers moved here and an unknown, but theoretically bounded amount of time for the new drivers as a new core RDMA transfer library needs to be written and the drivers modified to use it in order for them to move out of this directory. Signed-off-by: Doug Ledford

staging: ozwpan: Remove from tree

2015-08-11T00:00:49Z

Ozwpan is completely unmaintained and potentially a security problem. As this is a staging driver, it should be removed, since it has been abandoned. Cc: Shigekatsu Tateno Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

staging: sm7xxfb: merge sm712fb with fbdev

2015-08-07T22:05:01Z

Now since all cleanups are done and the code is ready to be merged lets move it out of staging into fbdev location. Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

Staging: most: add MOST driver's core module

2015-07-24T20:47:32Z

This patch adds the core module of the MOST driver to the kernel's driver staging area. This module is part of the MOST driver and handles the configuration interface in sysfs, the buffer management and the data routing. MOST defines the protocol, hardware and software layers necessary to allow for the efficient and low-cost transport of control, real-time and packet data using a single medium (physical layer). Media currently in use are fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST also supports various speed grades up to 150 Mbps. For more information on MOST, visit the MOST Cooperation website: www.mostcooperation.com. Cars continue to evolve into sophisticated consumer electronics platforms, increasing the demand for reliable and simple solutions to support audio, video and data communications. MOST can be used to connect multiple consumer devices via optical or electrical physical layers directly to one another or in a network configuration. As a synchronous network, MOST provides excellent Quality of Service and seamless connectivity for audio/video streaming. Therefore, the driver perfectly fits to the mission of Automotive Grade Linux to create open source software solutions for automotive applications. The driver consists basically of three layers. The hardware layer, the core layer and the application layer. The core layer consists of the core module only. This module handles the communication flow through all three layers, the configuration of the driver, the configuration interface representation in sysfs, and the buffer management. For each of the other two layers a selection of modules is provided. These modules can arbitrarily be combined to meet the needs of the desired system architecture. A module of the hardware layer is referred to as an HDM (hardware dependent module). Each module of this layer handles exactly one of the peripheral interfaces of a network interface controller (e.g. USB, MediaLB, I2C). A module of the application layer is referred to as an AIM (application interfacing module). The modules of this layer give access to MOST via one the following ways: character devices, ALSA, Networking or V4L2. To physically access MOST, an Intelligent Network Interface Controller (INIC) is needed. For more information on available controllers visit: www.microchip.com Signed-off-by: Christian Gromm Signed-off-by: Greg Kroah-Hartman

staging: wilc1000: Add SDIO/SPI 802.11 driver

2015-05-24T20:36:53Z

This driver is for the wilc1000 which is a single chip IEEE 802.11 b/g/n device. The driver works together with cfg80211, which is the kernel side of configuration management for wireless devices because the wilc1000 chipset is fullmac where the MLME is managed in hardware. The driver worked from kernel version 2.6.38 and being now ported to several others since then. A TODO file is included as well in this commit. Signed-off-by: Johnny Kim Signed-off-by: Rachel Kim Signed-off-by: Dean Lee Signed-off-by: Chris Park Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman

staging: remove i2o subsystem

2015-05-10T12:54:38Z

This subsystem isn't used anymore, and the hardware isn't around. It's been in staging for a while, and it's time for it to now be removed. Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman

staging: sm750: Fix the Makefile option error

2015-05-08T07:24:11Z

The sm750fb's Kconfig option is CONFIG_FB_SM750, not CONFIG_FB_SM7XX. Thus fix it to make the sm750fb can be built successfully. Signed-off-by: Binbin Zhou Reviewed-by: Huacai Chen Acked-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver

2015-03-07T01:28:09Z

Platform device driver that sets up the basic bus infrastructure for the fsl-mc bus type, including support for adding/removing fsl-mc devices, register/unregister of fsl-mc drivers, and bus match support to bind devices to drivers. Signed-off-by: J. German Rivera Signed-off-by: Stuart Yoder Acked-by: Alexander Graf Signed-off-by: Greg Kroah-Hartman