linux/drivers/staging, branch v5.1

staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf

2019-04-17T09:59:24Z

`ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `ni6501_detach()` will be called from the core comedi module code to clean up. `ni6501_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already beed freed, leading to a double-free error. Fix it bu removing the call to `kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying on `ni6501_detach()` to free the memory. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman

staging: comedi: ni_usb6501: Fix use of uninitialized mutex

2019-04-17T09:59:24Z

If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report : usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman

staging: erofs: fix unexpected out-of-bound data access

2019-04-16T11:56:20Z

Unexpected out-of-bound data will be read in erofs_read_raw_page after commit 07173c3ec276 ("block: enable multipage bvecs") since one iovec could have multiple pages. Let's fix as what Ming's pointed out in the previous email [1]. [1] https://lore.kernel.org/lkml/20190411080953.GE421@ming.t460p/ Suggested-by: Ming Lei Reviewed-by: Chao Yu Signed-off-by: Gao Xiang Fixes: 07173c3ec276 ("block: enable multipage bvecs") Signed-off-by: Greg Kroah-Hartman

staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf

2019-04-16T11:05:33Z

`vmk80xx_alloc_usb_buffers()` is called from `vmk80xx_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `vmk80xx_detach()` will be called from the core comedi module code to clean up. `vmk80xx_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already been freed, leading to a double-free error. Fix it by removing the call to `kfree(devpriv->usb_rx_buf)` from `vmk80xx_alloc_usb_buffers()`, relying on `vmk80xx_detach()` to free the memory. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman

staging: comedi: vmk80xx: Fix use of uninitialized semaphore

2019-04-16T11:05:33Z

If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report : usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman

staging: most: core: use device description as name

2019-04-02T18:23:07Z

This patch uses the device description to clearly identity a device attached to the bus. It is needed as the currently useed mdevX notation is not sufficiant in case more than one network interface controller is being used at the same time. Cc: stable@vger.kernel.org Signed-off-by: Christian Gromm Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2019-04-02T06:45:15Z

Jonathan writes: First set of IIO fixes for the 5.1 cycle. Mostly the usual mix, but the bme680 SPI fix is much larger than I would normally like. It never worked, but conversely we have code there that would make people expect it to do so. Chances of side effects are very low. * core - Fix an uninitialised bitaks that could potentially result in random channels being enabled on startup. * ad7192 - Fix a wrong channel address for ad7193. * ade7854 - Fix a typo that results in returning peak voltage instead of peak current. * at91 - Fix a potential hang due to a race on interrupt setting. * bmg160 - Fix scale factor of temperature * bme680 - Fix scale factor of temperature - Fix SPI read interface. This is a bit of a large patch as it seems that it never worked. It's major for this driver but is unlikely to have any negative side effects. * kxcjk1013 - restore sensor range setting after resume. * mcp4725 - make sure to store powerdown bits when storing to the eeprom. * mpu3050 - Mask the chip ID correctly as we have chips that set the bother bits of this register. * sgp30 - Fix a missing Kconfig block that means the driver doesn't actually ever get built. * tag 'iio-fixes-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: core: fix a possible circular locking dependency iio: ad_sigma_delta: select channel when reading register iio: pms7003: select IIO_TRIGGERED_BUFFER iio: cros_ec: Fix the maths for gyro scale calculation iio: adc: xilinx: prevent touching unclocked h/w on remove iio: adc: xilinx: fix potential use-after-free on probe iio: adc: xilinx: fix potential use-after-free on remove iio: dac: mcp4725: add missing powerdown bits in store eeprom io: accel: kxcjk1013: restore the range after resume. iio:chemical:bme680: Fix SPI read interface iio:chemical:bme680: Fix, report temperature in millidegrees iio: chemical: fix missing Kconfig block for sgp30 iio: adc: at91: disable adc channel interrupt in timeout case iio: gyro: mpu3050: fix chip ID reading iio: Fix scan mask selection staging: iio: ad7192: Fix ad7193 channel address iio/gyro/bmg160: Use millidegrees for temperature scale Staging: iio: meter: fixed typo

staging: vt6655: Remove vif check from vnt_interrupt

2019-03-29T16:25:45Z

A check for vif is made in vnt_interrupt_work. There is a small chance of leaving interrupt disabled while vif is NULL and the work hasn't been scheduled. Signed-off-by: Malcolm Priestley CC: stable@vger.kernel.org # v4.2+ Signed-off-by: Greg Kroah-Hartman

staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()

2019-03-29T16:25:45Z

After commit 419d6efc50e9, kernel cannot be crashed in the namei path. However, corrupted nameoff can do harm in the process of readdir for scenerios without dm-verity as well. Fix it now. Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations") Cc: # 4.19+ Signed-off-by: Gao Xiang Reviewed-by: Chao Yu Signed-off-by: Greg Kroah-Hartman

staging: octeon-ethernet: fix incorrect PHY mode

2019-03-25T20:54:18Z

When connecting PHY, we set the mode to PHY_INTERFACE_MODE_GMII which is not always correct. Specifically on boards where RGMII_RXID is needed networking now longer works with at803x after commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode"). Fix by passing the correct mode. Tested on EdgeRouter Lite (RGMII_RXID, at803x PHY) and D-Link DSR-500N (RGMII, broadcom PHY). Fixes: 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") Signed-off-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman