linux/drivers/staging, branch v6.8

Merge tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-02-17T16:52:38Z

Pull char / miscdriver fixes from Greg KH: "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5. Included in here are: - lots of iio driver fixes for reported issues - nvmem device naming fixup for reported problem - interconnect driver fixes for reported issues All of these have been in linux-next for a while with no reported the issues (the nvmem patch was included in a different branch in linux-next before sent to me for inclusion here)" * tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) nvmem: include bit index in cell sysfs file name iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data interconnect: qcom: x1e80100: Add missing ACV enable_mask interconnect: qcom: sm8650: Use correct ACV enable_mask iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs interconnect: qcom: sm8550: Enable sync_state ...

media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8

2024-02-01T12:47:52Z

The atomisp driver emulates a standard v4l2 device, which also works for non media-controller aware applications. Part of this requires making try_fmt calls on the sensor when a normal v4l2 app is making try_fmt calls on the /dev/video# mode. With the recent v4l2_subdev_state handling changes in 6.8 this no longer works, fixing this requires 2 changes: 1. The atomisp code was using its own internal v4l2_subdev_pad_config for this. Replace the internal v4l2_subdev_pad_config with allocating a full v4l2_subdev_state for storing the full try_fmt state. 2. The paths actually setting the fmt or crop selection now need to be passed the v4l2_subdev's active state, so that sensor drivers which are using the v4l2_subdev's active state to store their state keep working. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab

staging: iio: ad5933: fix type mismatch regression

2024-01-27T16:00:02Z

Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") fixed a compiler warning, but introduced a bug that resulted in one of the two 16 bit IIO channels always being zero (when both are enabled). This is because int is 32 bits wide on most architectures and in the case of a little-endian machine the two most significant bytes would occupy the buffer for the second channel as 'val' is being passed as a void pointer to 'iio_push_to_buffers()'. Fix by defining 'val' as u16. Tested working on ARM64. Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") Signed-off-by: David Schiller Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at Cc: Signed-off-by: Jonathan Cameron

Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-01-19T01:29:01Z

Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...

staging: greybus: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON

2024-01-18T20:10:41Z

After removal of the legacy eeprom driver the only remaining I2C client device driver supporting I2C_CLASS_SPD is jc42. Because this driver also supports I2C_CLASS_HWMON, adapters don't have to declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON. It's one step towards getting rid of I2C_CLASS_SPD mid-term. Acked-by: Greg Kroah-Hartman Signed-off-by: Heiner Kallweit Signed-off-by: Wolfram Sang

Merge tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2024-01-18T18:30:48Z

Pull staging driver updates from Greg KH: "Here is the "big" set of staging driver changes for 6.8-rc1. It's not really that big this release cycle, not much happened except for 186 patches of coding style cleanups. The majority was in the rtl8192e driver, but there are other smaller changes in a few other staging drivers, full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (186 commits) Staging: rtl8192e: Rename variable OpMode Staging: rtl8192e: Rename variable bIsAggregateFrame Staging: rtl8192e: Rename function rtllib_EnableNetMonitorMode() Staging: rtl8192e: Rename variable NumRxOkInPeriod Staging: rtl8192e: Rename variable NumTxOkInPeriod Staging: rtl8192e: Rename variable bUsed staging: vme_user: print more detailed infomation when an error occurs Staging: rtl8192e: Rename function rtllib_DisableNetMonitorMode() Staging: rtl8192e: Rename variable bInitState Staging: rtl8192e: Rename variable skb_waitQ Staging: rtl8192e: Rename variable BasicRate Staging: rtl8192e: Rename variable QueryRate Staging: rtl8192e: Rename function rtllib_TURBO_Info() Staging: rtl8192e: Rename function rtllib_WMM_Info() Staging: rtl8192e: Rename function rtllib_MFIE_Grate() Staging: rtl8192e: Rename function rtllib_MFIE_Brate() Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_new_net() Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_xmit() Staging: rtl8192e: Fix function definition broken across multiple lines Staging: rtl8192e: Fix statement broken across 2 lines in rtllib_rx_assoc_resp() ...

Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2024-01-12T22:29:48Z

Pull media updates from Mauro Carvalho Chehab: - v4l core: subdev frame interval now supports which field - v4l kapi: moves and renames the init_cfg pad op to init_state as an internal op. - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900 - new camera driver: STM32 DCMIPP - s5p-mfc has gained MFC v12 support - new ISP driver added to staging: Starfive - new stateful encoder/decoded: Wave5 codec It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc. - fwnode gained support for MIPI "DisCo for Imaging" (https://www.mipi.org/specifications/mipi-disco-imaging) - as usual, lots of cleanups, fixups and driver improvements. * tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits) media: i2c: thp7312: select CONFIG_FW_LOADER media: i2c: mt9m114: use fsleep() in place of udelay() media: videobuf2: core: Rename min_buffers_needed field in vb2_queue media: i2c: thp7312: Store frame interval in subdev state media: docs: uAPI: Fix documentation of 'which' field for routing ioctls media: docs: uAPI: Expand error documentation for invalid 'which' value media: docs: uAPI: Clarify error documentation for invalid 'which' value media: v4l2-subdev: Store frame interval in subdev state media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF media: s5p-mfc: Load firmware for each run in MFCv12. media: s5p-mfc: Set context for valid case before calling try_run media: s5p-mfc: Add support for DMABUF for encoder media: s5p-mfc: Add support for UHD encoding. media: s5p-mfc: Add support for rate controls in MFCv12 media: s5p-mfc: Add YV12 and I420 multiplanar format support media: s5p-mfc: Add initial support for MFCv12 media: s5p-mfc: Rename IS_MFCV10 macro ...

Staging: rtl8192e: Rename variable OpMode

2024-01-04T13:34:51Z

Rename variable OpMode to op_mode to fix checkpatch warning Avoid CamelCase. Signed-off-by: Tree Davies Link: https://lore.kernel.org/r/20231225202314.31869-7-tdavies@darkphysics.net Signed-off-by: Greg Kroah-Hartman

Staging: rtl8192e: Rename variable bIsAggregateFrame

2024-01-04T13:34:51Z

Rename variable bIsAggregateFrame to is_aggregate_frame to fix checkpatch warning Avoid CamelCase. Signed-off-by: Tree Davies Link: https://lore.kernel.org/r/20231225202314.31869-6-tdavies@darkphysics.net Signed-off-by: Greg Kroah-Hartman

Staging: rtl8192e: Rename function rtllib_EnableNetMonitorMode()

2024-01-04T13:34:51Z

Rename function rtllib_EnableNetMonitorModeto to rtllib_enable_net_monitor_mode to fix checkpatch warning Avoid CamelCase. Signed-off-by: Tree Davies Link: https://lore.kernel.org/r/20231225202314.31869-5-tdavies@darkphysics.net Signed-off-by: Greg Kroah-Hartman