linux/drivers/tee, branch v5.5

Merge tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes

2020-01-24T20:05:08Z

Fix OP-TEE compile error with nommu * tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix compilation issue with nommu Link: https://lore.kernel.org/r/20200123101310.GA10320@jax Signed-off-by: Olof Johansson

tee: optee: Fix compilation issue with nommu

2020-01-23T09:55:20Z

The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by: Vincenzo Frascino [jw: update commit title] Signed-off-by: Jens Wiklander

optee: Fix multi page dynamic shm pool alloc

2020-01-03T10:21:12Z

optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao Signed-off-by: Sumit Garg Tested-by: Vincent Cao Signed-off-by: Jens Wiklander

Merge mainline/master into arm/fixes

2019-12-05T21:18:54Z

This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson

tee: optee: fix device enumeration error handling

2019-11-15T10:31:24Z

Prior to this patch in optee_probe() when optee_enumerate_devices() was called the struct optee was fully initialized. If optee_enumerate_devices() returns an error optee_probe() is supposed to clean up and free the struct optee completely, but will at this late stage need to call optee_remove() instead. This isn't done and thus freeing the struct optee prematurely. With this patch the call to optee_enumerate_devices() is done after optee_probe() has returned successfully and in case optee_enumerate_devices() fails everything is cleaned up with a call to optee_remove(). Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander

tee: optee: Fix dynamic shm pool allocations

2019-11-15T10:31:11Z

In case of dynamic shared memory pool, kernel memory allocated using dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage during optee_open_session() or optee_invoke_func(). So fix dmabuf_mgr pool allocations via an additional call to optee_shm_register(). Also, allow kernel pages to be registered as shared memory with OP-TEE. Fixes: 9733b072a12a ("optee: allow to work without static shared memory") Signed-off-by: Sumit Garg Signed-off-by: Jens Wiklander

compat_ioctl: move more drivers to compat_ptr_ioctl

2019-10-23T15:23:44Z

The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe Acked-by: Daniel Vetter Acked-by: Mauro Carvalho Chehab Acked-by: Greg Kroah-Hartman Acked-by: David Sterba Acked-by: Darren Hart (VMware) Acked-by: Jonathan Cameron Acked-by: Bjorn Andersson Acked-by: Dan Williams Signed-off-by: Arnd Bergmann

tee/shm: untag user pointers in tee_shm_register

2019-09-26T00:51:41Z

This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. tee_shm_register()->optee_shm_unregister()->check_mem_type() uses provided user pointers for vma lookups (via __check_mem_type()), which can only by done with untagged pointers. Untag user pointers in this function. Link: http://lkml.kernel.org/r/4b993f33196b3566ac81285ff8453219e2079b45.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Reviewed-by: Kees Cook Acked-by: Jens Wiklander Cc: Al Viro Cc: Catalin Marinas Cc: Dave Hansen Cc: Eric Auger Cc: Felix Kuehling Cc: Khalid Aziz Cc: Mauro Carvalho Chehab Cc: Mike Rapoport Cc: Vincenzo Frascino Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

tee: optee: add might_sleep for RPC requests

2019-07-08T20:38:56Z

If the kernel is compiled with CONFIG_PREEMPT_VOLUNTARY and OP-TEE is executing a long running workload, the following errors are raised: [ 1705.971228] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 1705.977195] rcu: (detected by 0, t=2102 jiffies, g=51977, q=3) [ 1705.983152] rcu: All QSes seen, last rcu_sched kthread activity 2102 (140596-138494), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 1705.994729] optee-xtest R running task 0 169 157 0x00000002 While OP-TEE is returning regularly to the kernel due to timer interrupts, the OPTEE_SMC_FUNC_FOREIGN_INTR case does not contain an explicit rescheduling point. Add a might_sleep() to the RPC request case to ensure that the kernel can reschedule another task if OP-TEE requests RPC handling. Signed-off-by: Rouven Czerwinski Signed-off-by: Jens Wiklander

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman