linux/drivers/thermal, branch v6.7

Merge tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-11-01T01:28:37Z

Pull thermal control updates from Rafael Wysocki: "These further rework the ACPI thermal driver, after the changes made to it in the previous cycle, to make it easier to grasp, get rid of redundant pieces of internal data structures and eliminate its reliance on a specific ordering of trip point objects in the thermal core, make thermal core adjustments needed for the ACPI thermal driver rework, modify the thermal governor interface so as to use trip pointers for representing trip points in it, switch over multiple thermal drivers to using void platform driver remove callbacks, add support for 2 hardware features to the Intel int340x thermal driver, add support for new hardware on ARM platforms, update documentation, fix problems, clean up code and update the MAINTAINERS record for thermal control. Specifics: - Untangle the initialization and updates of passive and active trip points in the ACPI thermal driver (Rafael Wysocki) - Reduce code duplication related to the initialization and updates of trip points in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers for cooling device binding in the ACPI thermal driver (Rafael Wysocki) - Simplify critical and hot trips representation in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers in thermal governors and in the related part of the thermal core (Rafael Wysocki) - Drop the trips_disabled bitmask that has become redundant from the thermal core (Rafael Wysocki) - Avoid updating trip points when the thermal zone temperature falls into a trip point's hysteresis range (ícolas F. R. A. Prado) - Add power floor notifications support to the int340x thermal control driver (Srinivas Pandruvada) - Rework updating trip points in the int340x thermal driver so that it does not access thermal zone internals directly (Rafael Wysocki) - Use param_get_byte() instead of param_get_int() as the max_idle module parameter .get() callback in the Intel powerclamp thermal driver to avoid possible out-of-bounds access (David Arcari) - Add workload hints support to the int340x thermal driver (Srinivas Pandruvada) - Add support for Mediatek LVTS MT8192 along with suspend/resume routines (Balsam Chihi) - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus Schneider-Pargmann) - Remove duplicate error message from the max76620 driver when thermal_of_zone_register() fails (Thierry Reding) - Add i.MX7D compatible bindings to fix a warning from dtbs_check for the imx6ul platform (Alexander Stein) - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain) - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in the LVTS Mediatek driver (Minjie Du) - Remove unused variable in thermal/tools (Kuan-Wei Chiu) - Document the imx8dl thermal sensor (Fabio Estevam) - Add variable names in callback prototypes to prevent warning from checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel) - Add missing unevaluatedProperties on child node schemas for tegra124 (Rob Herring) - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)" * tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits) thermal: ACPI: Include the right header file thermal: core: Don't update trip points inside the hysteresis range thermal: core: Pass trip pointer to governor throttle callback thermal: gov_step_wise: Fold update_passive_instance() into its caller thermal: gov_power_allocator: Use trip pointers instead of trip indices thermal: gov_fair_share: Rearrange get_trip_level() thermal: trip: Define for_each_trip() macro thermal: trip: Simplify computing trip indices thermal/qcom/tsens: Drop ops_v0_1 thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation thermal/drivers/mediatek/lvts_thermal: Add mt8192 support thermal/drivers/mediatek/lvts_thermal: Add suspend and resume dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 thermal/drivers/mediatek: Fix probe for THERMAL_V2 thermal/drivers/max77620: Remove duplicate error message dt-bindings: timer: add imx7d compatible dt-bindings: net: microchip: Allow nvmem-cell usage dt-bindings: imx-thermal: Add #thermal-sensor-cells property dt-bindings: thermal: tsens: Add sa8775p compatible thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init() ...

Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2023-10-31T05:09:55Z

Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...

Merge tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

2023-10-25T12:41:10Z

Merge thermal control (ARM drivers mostly) updates for 6.7-rc1 from Daniel Lezcano: "- Add support for Mediatek LVTS MT8192 driver along with the suspend/resume routines (Balsam Chihi) - Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus Schneider-Pargmann) - Remove duplicate error message in the max76620 driver when thermal_of_zone_register() fails as the sub routine already show one (Thierry Reding) - Add i.MX7D compatible bindings to fix a warning from dtbs_check for the imx6ul platform (Alexander Stein) - Add sa8775p compatible for the QCom tsens driver (Priyansh Jain) - Fix error check in lvts_debugfs_init() which is checking against NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du) - Remove unused variable in the thermal/tools (Kuan-Wei Chiu) - Document the imx8dl thermal sensor (Fabio Estevam) - Add variable names in callback prototypes to prevent warning from checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel) - Add missing unevaluatedProperties on child node schemas for tegra124 (Rob Herring) - Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)" * tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/qcom/tsens: Drop ops_v0_1 thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation thermal/drivers/mediatek/lvts_thermal: Add mt8192 support thermal/drivers/mediatek/lvts_thermal: Add suspend and resume dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 thermal/drivers/mediatek: Fix probe for THERMAL_V2 thermal/drivers/max77620: Remove duplicate error message dt-bindings: timer: add imx7d compatible dt-bindings: net: microchip: Allow nvmem-cell usage dt-bindings: imx-thermal: Add #thermal-sensor-cells property dt-bindings: thermal: tsens: Add sa8775p compatible thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init() tools/thermal: Remove unused 'mds' and 'nrhandler' variables dt-bindings: thermal: fsl,scu-thermal: Document imx8dl thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding identifier name dt-bindings: thermal: nvidia,tegra124-soctherm: Add missing unevaluatedProperties on child node schemas thermal/drivers/mediatek/lvts_thermal: Add mt7988 support thermal/drivers/mediatek/lvts_thermal: Make coeff configurable dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988 dt-bindings: thermal: mediatek: Add mt7988 lvts compatible

Merge branch 'thermal-intel'

2023-10-23T18:06:58Z

Merge changes in Intel thermal control drivers for 6.7-rc1: - Add power floor notifications support to the int340x thermal control driver (Srinivas Pandruvada). - Rework updating trip points in the int340x thermal driver so that it does not access thermal zone internals directly (Rafael Wysocki). - Use param_get_byte() instead of param_get_int() as the max_idle module parameter .get() callback in the Intel powerclamp thermal driver to avoid possible out-of-bounds access (David Arcari). - Add workload hints support to the the int340x thermal driver (Srinivas Pandruvada). * thermal-intel: selftests/thermel/intel: Add test to read power floor status thermal: int340x: processor_thermal: Enable power floor support thermal: int340x: processor_thermal: Handle power floor interrupts thermal: int340x: processor_thermal: Support power floor notifications thermal: int340x: processor_thermal: Set feature mask before proc_thermal_add thermal: int340x: processor_thermal: Common function to clear SOC interrupt thermal: int340x: processor_thermal: Move interrupt status MMIO offset to common header thermal: intel: powerclamp: fix mismatch in get function for max_idle thermal: int340x: Use thermal_zone_for_each_trip() thermal: int340x: processor_thermal: Ack all PCI interrupts thermal: int340x: Add ArrowLake-S PCI ID selftests/thermel/intel: Add test to read workload hint thermal: int340x: Handle workload hint interrupts thermal: int340x: processor_thermal: Add workload type hint interface thermal: int340x: Remove PROC_THERMAL_FEATURE_WLT_REQ for Meteor Lake thermal: int340x: processor_thermal: Use non MSI interrupts by default thermal: int340x: processor_thermal: Add interrupt configuration function thermal: int340x: processor_thermal: Move mailbox code to common module

Merge branch 'thermal-core'

2023-10-23T18:00:51Z

Merge thermal core changes for 6.7-rc1: - Use trip pointers in thermal governors and in the related part of the thermal core (Rafael Wysocki). - Avoid updating trip points when the thermal zone temperature falls into a trip point's hysteresis range (ícolas F. R. A. Prado). * thermal-core: thermal: ACPI: Include the right header file thermal: core: Don't update trip points inside the hysteresis range thermal: core: Pass trip pointer to governor throttle callback thermal: gov_step_wise: Fold update_passive_instance() into its caller thermal: gov_power_allocator: Use trip pointers instead of trip indices thermal: gov_fair_share: Rearrange get_trip_level() thermal: trip: Define for_each_trip() macro thermal: trip: Simplify computing trip indices

Merge branch 'acpi-thermal'

2023-10-23T17:51:26Z

Merge ACPI thermal driver changes are related thermal core changes for v6.7-rc1: - Untangle the initialization and updates of passive and active trip points in the ACPI thermal driver (Rafael Wysocki). - Reduce code duplication related to the initialization and updates of trip points in the ACPI thermal driver (Rafael Wysocki). - Use trip pointers for cooling device binding in the ACPI thermal driver (Rafael Wysocki). - Simplify critical and hot trips representation in the ACPI thermal driver (Rafael Wysocki). * acpi-thermal: (26 commits) thermal: trip: Drop lockdep assertion from thermal_zone_trip_id() thermal: trip: Remove lockdep assertion from for_each_thermal_trip() thermal: core: Drop thermal_zone_device_exec() ACPI: thermal: Use thermal_zone_for_each_trip() for updating trips ACPI: thermal: Combine passive and active trip update functions ACPI: thermal: Move get_active_temp() ACPI: thermal: Fix up function header formatting in two places ACPI: thermal: Drop list of device ACPI handles from struct acpi_thermal ACPI: thermal: Rename structure fields holding temperature in deci-Kelvin ACPI: thermal: Drop critical_valid and hot_valid trip flags ACPI: thermal: Do not use trip indices for cooling device binding ACPI: thermal: Mark uninitialized active trips as invalid ACPI: thermal: Merge trip initialization functions ACPI: thermal: Collapse trip devices update function wrappers ACPI: thermal: Collapse trip devices update functions ACPI: thermal: Add device list to struct acpi_thermal_trip ACPI: thermal: Fix a small leak in acpi_thermal_add() ACPI: thermal: Drop valid flag from struct acpi_thermal_trip ACPI: thermal: Drop redundant trip point flags ACPI: thermal: Untangle initialization and updates of active trips ...

thermal: ACPI: Include the right header file

2023-10-20T17:26:37Z

It is not necessary to include thermal_core.h into thermal_acpi.c, because none of the code in there depends on anything in the former, except for the linux/thermal.h, but it is better to include that one directly instead of including the entire thermal_core.h, so make that change. No functional impact. Fixes: 7a0e39748861 ("thermal: ACPI: Add ACPI trip point routines") Signed-off-by: Rafael J. Wysocki Acked-by: Daniel Lezcano

thermal: core: Don't update trip points inside the hysteresis range

2023-10-20T17:26:37Z

When searching for the trip points that need to be set, the nearest higher trip point's temperature is used for the high trip, while the nearest lower trip point's temperature minus the hysteresis is used for the low trip. The issue with this logic is that when the current temperature is inside a trip point's hysteresis range, both high and low trips will come from the same trip point. As a consequence instability can still occur like this: * the temperature rises slightly and enters the hysteresis range of a trip point * polling happens and updates the trip points to the hysteresis range * the temperature falls slightly, exiting the hysteresis range, crossing the trip point and triggering an IRQ, the trip points are updated * repeat So even though the current hysteresis implementation prevents instability from happening due to IRQs triggering on the same temperature value, both ways, it doesn't prevent it from happening due to an IRQ on one way and polling on the other. To properly implement a hysteresis behavior, when inside the hysteresis range, don't update the trip points. This way, the previously set trip points will stay in effect, which will in a way remember the previous state (if the temperature signal came from above or below the range) and therefore have the right trip point already set. The exception is if there was no previous trip point set, in which case a previous state doesn't exist, and so it's sensible to allow the hysteresis range as trip points. The following logs show the current behavior when running on a real machine: [ 202.524658] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000 203.562817: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37979 [ 203.562845] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000 204.176059: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37979 temp=40028 [ 204.176089] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000 205.226813: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40028 temp=38652 [ 205.226842] thermal thermal_zone0: new temperature boundaries: 37000 < x < 40000 And with this patch applied: [ 184.933415] thermal thermal_zone0: new temperature boundaries: -2147483647 < x < 40000 185.981182: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=36986 temp=37872 186.744685: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=37872 temp=40058 [ 186.744716] thermal thermal_zone0: new temperature boundaries: 37000 < x < 100000 187.773284: thermal_temperature: thermal_zone=vpu0-thermal id=0 temp_prev=40058 temp=38698 Fixes: 060c034a9741 ("thermal: Add support for hardware-tracked trip points") Signed-off-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Co-developed-by: Rafael J. Wysocki Signed-off-by: Rafael J. Wysocki

thermal: core: Pass trip pointer to governor throttle callback

2023-10-20T17:26:37Z

Modify the governor .throttle() callback definition so that it takes a trip pointer instead of a trip index as its second argument, adjust the governors accordingly and update the core code invoking .throttle(). This causes the governors to become independent of the representation of the list of trips in the thermal zone structure. This change is not expected to alter the general functionality. Signed-off-by: Rafael J. Wysocki Reviewed-by: Daniel Lezcano

thermal: gov_step_wise: Fold update_passive_instance() into its caller

2023-10-20T17:26:37Z

Fold update_passive_instance() into thermal_zone_trip_update() that is its only caller so as to make the code in question easier to follow. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Acked-by: Daniel Lezcano Reviewed-by: Lukasz Luba