linux/drivers/thunderbolt, branch v6.0

Merge tag 'thunderbolt-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

2022-09-27T08:47:36Z

Mika writes: "thunderbolt: Fix for v6.0 final This includes a single fix from Mario that resets the plug event delay back to the USB4 spec value. This has been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Explicitly reset plug events delay back to USB4 spec value

Merge tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-09-23T16:07:08Z

Pull USB / Thunderbolt driver fixes and ids from Greg KH: "Here are a few small USB and Thunderbolt driver fixes and new device ids for 6.0-rc7. They contain: - new usb-serial driver ids - documentation build warning fix in USB hub code - flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA so I have finally picked this up as it is a fix for a reported problem.) - dwc3 64bit DMA bugfix - new thunderbolt device ids - typec build error fix All of these have been in linux-next with no reported issues" * tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY media: flexcop-usb: fix endpoint type check USB: serial: option: add Quectel RM520N USB: serial: option: add Quectel BG95 0x0203 composition thunderbolt: Add support for Intel Maple Ridge single port controller usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA USB: core: Fix RST error in hub.c

thunderbolt: Explicitly reset plug events delay back to USB4 spec value

2022-09-22T11:32:16Z

If any software has interacted with the USB4 registers before the Linux USB4 CM runs, it may have modified the plug events delay. It has been observed that if this value too large, it's possible that hotplugged devices will negotiate a fallback mode instead in Linux. To prevent this, explicitly align the plug events delay with the USB4 spec value of 10ms. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg

Merge tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2022-09-09T18:13:36Z

Pull KUnit fixes from Shuah Khan: "Two fixes to test build and a fix for incorrect taint reason reporting" * tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: Add new "test" taint to kernel-chktaint kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves kunit: fix assert_type for comparison macros

thunderbolt: Add support for Intel Maple Ridge single port controller

2022-09-09T05:45:57Z

Add support for Maple Ridge discrete USB4 host controller from Intel which has a single USB4 port (versus the already supported dual port Maple Ridge USB4 host controller). Cc: stable@vger.kernel.org Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg

kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves

2022-09-01T19:00:48Z

Both the USB4 and Nitro Enclaves KUNIT tests are now able to be compiled if KUNIT is compiled as a module. This leads to issues if KUNIT is being packaged separately from the core kernel and when KUNIT is run baremetal without the required driver compiled into the kernel. Fixes: 635dcd16844b ("thunderbolt: test: Use kunit_test_suite() macro") Fixes: fe5be808fa6c ("nitro_enclaves: test: Use kunit_test_suite() macro") Signed-off-by: Nico Pache Reviewed-by: David Gow Reviewed-by: Andra Paraschiv Acked-by: Brendan Higgins Signed-off-by: Shuah Khan

thunderbolt: Check router generation before connecting xHCI

2022-08-18T08:55:52Z

Only Thunderbolt 3 routers need the xHCI connection flow. This also ensures the router actually has both lane adapters (1 and 3). While there move declaration of the boolean variables inside the block where they are being used. Fixes: 30a4eca69b76 ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg

thunderbolt: Use the actual buffer in tb_async_error()

2022-08-18T08:55:46Z

The received notification packet is held in pkg->buffer and not in pkg itself. Fix this by using the correct buffer. Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg

Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-08-04T18:41:28Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of Thunderbolt and USB changes for 6.0-rc1. Lots of little things here, nothing major, just constant development on some new hardware support and cleanups of older drivers. Highlights are: - lots of typec changes and improvements for new hardware - new gadget controller driver - thunderbolt support for new hardware - the normal set of new usb-serial device ids and cleanups - loads of dwc3 controller fixes and improvements - mtu3 driver updates - testusb fixes for longtime issues (not many people use this tool it seems.) - minor driver fixes and improvements over the USB tree - chromeos platform driver changes were added and then reverted as they depened on some typec changes, but the cross-tree merges caused problems so they will come back later through the platform tree. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits) usb: misc: onboard_usb_hub: Remove duplicated power_on delay usb: misc: onboard_usb_hub: Add TI USB8041 hub support usb: misc: onboard_usb_hub: Add reset-gpio support USB: usbsevseg: convert sysfs snprintf to sysfs_emit dt-bindings: usb: Add binding for TI USB8041 hub controller ARM: multi_v7_defconfig: enable USB onboard HUB driver ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub dt-bindings: usb: generic-ehci: allow usb-hcd schema properties usb: typec: ucsi: stm32g0: add bootloader support usb: typec: ucsi: stm32g0: add support for stm32g0 controller dt-bindings: usb: typec: add bindings for stm32g0 controller usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable() usb/chipidea: fix repeated words in comments usb: renesas-xhci: Do not print any log while fw verif success usb: typec: retimer: Add missing id check in match callback USB: xhci: Fix comment typo usb/typec/tcpm: fix repeated words in comments usb/musb: fix repeated words in comments ...

Merge tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2022-08-03T02:34:45Z

Pull KUnit updates from Shuah Khan: "This consists of several fixes and an important feature to discourage running KUnit tests on production systems. Running tests on a production system could leave the system in a bad state. Summary: - Add a new taint type, TAINT_TEST to signal that a test has been run. This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc) - Several documentation and tool enhancements and fixes" * tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: KUnit: Fix example with compilation error Documentation: kunit: Add CLI args for kunit_tool kcsan: test: Add a .kunitconfig to run KCSAN tests kunit: executor: Fix a memory leak on failure in kunit_filter_tests clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro thunderbolt: test: Use kunit_test_suite() macro kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites kunit: unify module and builtin suite definitions selftest: Taint kernel when test module loaded module: panic: Taint the kernel when selftest modules load Documentation: kunit: fix example run_kunit func to allow spaces in args Documentation: kunit: Cleanup run_wrapper, fix x-ref kunit: test.h: fix a kernel-doc markup kunit: tool: Enable virtio/PCI by default on UML kunit: tool: make --kunitconfig repeatable, blindly concat kunit: add coverage_uml.config to enable GCOV on UML kunit: tool: refactor internal kconfig handling, allow overriding kunit: tool: introduce --qemu_args ...