linux/drivers/tty/ipwireless, branch v4.14

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

networking: introduce and use skb_put_data()

2017-06-16T15:48:37Z

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

tty: ipwireless, cleanup TIOCGSERIAL

2016-06-25T15:56:30Z

In ipwireless_get_serial_info, struct serial_struct is memset to 0 and then some members set to 0 explicitly. Remove the latter as it is obviously superfluous. And remove the retinfo check against NULL. copy_to_user will take care of that. Part of hub6 cleanup series. Signed-off-by: Jiri Slaby Cc: Jiri Kosina Acked-by: David Sterba Signed-off-by: Greg Kroah-Hartman

tty: ipwireless: fix possible NULL dereference

2016-04-30T16:26:55Z

The function alloc_ctrl_packet() can fail and return NULL. Incase it fails print an error message and exit. Signed-off-by: Sudip Mukherjee Reviewed-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2015-04-14T16:50:27Z

Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags

ipwireless: missing assignment

2015-03-06T22:12:00Z

We never report the error because we don't assign it to ret. Signed-off-by: Alan Cox Signed-off-by: Jiri Kosina

tty: ipwireless: Fix probable mask then right shift defects

2014-11-06T04:06:33Z

Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the masks. Signed-off-by: Joe Perches Acked-by: David Sterba Reviewed-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

tty: ipwireless: Remove tty->closing abort from ipw_open()

2014-07-10T23:06:49Z

tty->closing cannot be set on ipw_open() because the ipwireless tty driver does not call any functions that set tty->closing. CC: Jiri Kosina Signed-off-by: Peter Hurley Acked-by: David Sterba Signed-off-by: Greg Kroah-Hartman

tty: Fix low_latency BUG

2014-03-01T00:31:00Z

The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db89799bdf11625a831c5af33938dcb11908b6, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by: Beat Bolli Reported-by: Pavel Roskin Acked-by: David Sterba Cc: Grant Edwards Cc: Stanislaw Gruszka Cc: Hal Murray Cc: # 3.12.x+ Signed-off-by: Peter Hurley Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman

tty: delete non-required instances of include

2014-01-08T01:05:21Z

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman