linux/drivers/tty/serial/sh-sci.c, branch v5.9

Revert "serial: sh-sci: Initialize spinlock for uart console"

2020-07-21T16:21:49Z

This reverts commit f38278e9b810b06aff2981d505267be984423ba3. There has been a quick fix against uninitialised lock revealed by the commit f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()"). Since we have now better fix in serial core, this may be safely reverted. Fixes: f38278e9b810 ("serial: sh-sci: Initialize spinlock for uart console") Depends-on: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200711135346.71171-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Initialize spinlock for uart console

2020-07-03T08:40:34Z

serial core expects the spinlock to be initialized by the controller driver for serial console, this patch makes sure the spinlock is initialized, fixing the below issue: [ 0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.865945] lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: /-1, .owner_cpu: 0 [ 0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112 [ 0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT) [ 0.865968] Call trace: [ 0.865979] dump_backtrace+0x0/0x1d8 [ 0.865985] show_stack+0x14/0x20 [ 0.865996] dump_stack+0xe8/0x130 [ 0.866006] spin_dump+0x6c/0x88 [ 0.866012] do_raw_spin_lock+0xb0/0xf8 [ 0.866023] _raw_spin_lock_irqsave+0x80/0xa0 [ 0.866032] uart_add_one_port+0x3a4/0x4e0 [ 0.866039] sci_probe+0x504/0x7c8 [ 0.866048] platform_drv_probe+0x50/0xa0 [ 0.866059] really_probe+0xdc/0x330 [ 0.866066] driver_probe_device+0x58/0xb8 [ 0.866072] device_driver_attach+0x6c/0x90 [ 0.866078] __driver_attach+0x88/0xd0 [ 0.866085] bus_for_each_dev+0x74/0xc8 [ 0.866091] driver_attach+0x20/0x28 [ 0.866098] bus_add_driver+0x14c/0x1f8 [ 0.866104] driver_register+0x60/0x110 [ 0.866109] __platform_driver_register+0x40/0x48 [ 0.866119] sci_init+0x2c/0x34 [ 0.866127] do_one_initcall+0x88/0x428 [ 0.866137] kernel_init_freeable+0x2c0/0x328 [ 0.866143] kernel_init+0x10/0x108 [ 0.866150] ret_from_fork+0x10/0x18 Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable Link: https://lore.kernel.org/r/1593618100-2151-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Make sure status register SCxSR is read in correct sequence

2020-04-16T14:16:52Z

For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: Signed-off-by: Kazuhiro Fujita Signed-off-by: Hao Bui Signed-off-by: KAZUMI HARADA Signed-off-by: Lad Prabhakar Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-01-29T18:13:27Z

Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59Z

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

tty/serial: Migrate sh-sci to use has_sysrq

2019-12-18T14:05:02Z

The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Signed-off-by: Dmitry Safonov Link: https://lore.kernel.org/r/20191213000657.931618-42-dima@arista.com Signed-off-by: Greg Kroah-Hartman

Merge 5.4-rc5 into driver-core-next

2019-10-27T17:54:13Z

We want the sysfs fix in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman

sh: add the sh_ prefix to early platform symbols

2019-10-07T11:50:48Z

Old early platform device support is now sh-specific. Before moving on to implementing new early platform framework based on real platform devices, prefix all early platform symbols with 'sh_'. Signed-off-by: Bartosz Golaszewski Cc: Rich Felker Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman

drivers: move the early platform device support to arch/sh

2019-10-07T11:50:47Z

SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski Cc: Rich Felker Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Use platform_get_irq_optional() for optional interrupts

2019-10-04T13:02:28Z

As platform_get_irq() now prints an error when the interrupt does not exist, scary warnings may be printed for optional interrupts: sh-sci e6550000.serial: IRQ index 1 not found sh-sci e6550000.serial: IRQ index 2 not found sh-sci e6550000.serial: IRQ index 3 not found sh-sci e6550000.serial: IRQ index 4 not found sh-sci e6550000.serial: IRQ index 5 not found Fix this by calling platform_get_irq_optional() instead for all but the first interrupts, which are optional. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven Reviewed-by: Stephen Boyd Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20191001180743.1041-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman