linux/drivers/tty/serial, branch v3.12

tty/serial: at91: fix uart/usart selection for older products

2013-10-17T20:27:24Z

Since commit 055560b04a8cd063aea916fd083b7aec02c2adb8 (serial: at91: distinguish usart and uart) the older products which do not have a name field in their register map are unable to use their serial output. As the main console output is usually the serial interface (aka DBGU) it is pretty unfortunate. So, instead of failing during probe() we just silently configure the serial peripheral as an uart. It allows us to use these serial outputs. The proper solution is proposed in another patch. Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman

serial: vt8500: add missing braces

2013-10-16T20:22:16Z

Due to missing braces on an if statement, in presence of a device_node a port was always assigned -1, regardless of any alias entries in the device tree. Conversely, if device_node was NULL, an unitialized port ended up being used. This patch adds the missing braces, fixing the issues. Signed-off-by: Roel Kluin Acked-by: Tony Prisk Cc: stable Signed-off-by: Greg Kroah-Hartman

Revert "serial: i.MX: evaluate linux,stdout-path property"

2013-10-08T02:06:59Z

This reverts commit f7d2c0bbdb7b784cc035cacb7d36b379ba1c3bef, as it causes build errors when the driver is built as a module. Reported-by: Guenter Roeck Cc: Sascha Hauer Cc: Fabio Estevam Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: remove unnecessary tty_port_tty_get

2013-09-17T17:05:47Z

Remove unused tty-reference from dma-rx path which was left after the recent tty-port conversions. Also remove a redundant port initialisation while at it. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix tty-kref leak in dma-rx path

2013-09-17T17:05:47Z

Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix tty-kref leak in rx-error path

2013-09-17T17:05:47Z

Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serial: tegra: fix tty-kref leak

2013-09-17T17:05:47Z

Fix potential tty-kref leak in stop_rx path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman

Remove GENERIC_HARDIRQ config option

2013-09-13T13:09:52Z

After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-09-06T20:26:27Z

Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2013-09-06T18:14:33Z

Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change to in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for tile: use asm-generic version of tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...