linux/drivers/tty/serial, branch v4.8

serial: 8250: added acces i/o products quad and octal serial cards

2016-08-31T14:28:26Z

Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: fix divide error bug if baud rate is 0

2016-08-31T13:49:26Z

Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

Revert "tty/serial/8250: use mctrl_gpio helpers"

2016-08-31T13:36:01Z

Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko Tested-by: Heikki Krogerus Tested-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

8250/fintek: rename IRQ_MODE macro

2016-08-18T16:16:13Z

A bugfix for the fintek driver required defining some macros, but one of them clashes with a system header on ARM: drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror] #define IRQ_MODE 0x70 In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0, from /git/arm-soc/arch/arm/include/asm/irqflags.h:6, from /git/arm-soc/include/linux/irqflags.h:15, from /git/arm-soc/arch/arm/include/asm/bitops.h:27, from /git/arm-soc/include/linux/bitops.h:36, from /git/arm-soc/include/linux/kernel.h:10, from /git/arm-soc/include/linux/list.h:8, from /git/arm-soc/include/linux/module.h:9, from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11: arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE. Signed-off-by: Arnd Bergmann Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode") Link: https://patchwork.kernel.org/patch/9200119/ Acked-by: Ji-Ze Hong (Peter Hong) Acked-by: Ricardo Ribalda Delgado Signed-off-by: Greg Kroah-Hartman

tree-wide: replace config_enabled() with IS_ENABLED()

2016-08-04T12:50:07Z

The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Acked-by: Kees Cook Cc: Stas Sergeev Cc: Matt Redfearn Cc: Joshua Kinard Cc: Jiri Slaby Cc: Bjorn Helgaas Cc: Borislav Petkov Cc: Markos Chandras Cc: "Dmitry V. Levin" Cc: yu-cheng yu Cc: James Hogan Cc: Brian Gerst Cc: Johannes Berg Cc: Peter Zijlstra Cc: Al Viro Cc: Will Drewry Cc: Nikolay Martynov Cc: Huacai Chen Cc: "H. Peter Anvin" Cc: Thomas Gleixner Cc: Daniel Borkmann Cc: Leonid Yegoshin Cc: Rafal Milecki Cc: James Cowgill Cc: Greg Kroah-Hartman Cc: Ralf Baechle Cc: Alex Smith Cc: Adam Buchbinder Cc: Qais Yousef Cc: Jiang Liu Cc: Mikko Rapeli Cc: Paul Gortmaker Cc: Denys Vlasenko Cc: Brian Norris Cc: Hidehiro Kawai Cc: "Luis R. Rodriguez" Cc: Andy Lutomirski Cc: Ingo Molnar Cc: Dave Hansen Cc: "Kirill A. Shutemov" Cc: Roland McGrath Cc: Paul Burton Cc: Kalle Valo Cc: Viresh Kumar Cc: Tony Wu Cc: Huaitong Han Cc: Sumit Semwal Cc: Alexei Starovoitov Cc: Juergen Gross Cc: Jason Cooper Cc: "David S. Miller" Cc: Oleg Nesterov Cc: Andrea Gelmini Cc: David Woodhouse Cc: Marc Zyngier Cc: Rabin Vincent Cc: "Maciej W. Rozycki" Cc: David Daney Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-08-01T22:36:01Z

Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...

sparc: serial: sunhv: fix a double lock bug

2016-07-28T05:54:52Z

We accidentally take the "port->lock" twice in a row. This old code was supposed to be deleted. Fixes: e58e241c1788 ('sparc: serial: Clean up the locking for -rt') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller

serial: clps711x: Changing the compatibility string to match with the smallest supported chip

2016-07-06T15:38:16Z

This patch changes the compatibility string to match with the smallest supported chip (EP7209). Since the DT-support for this CPU is not yet announced, this change is safe. Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann

tty/serial: atmel: enforce tasklet init and termination sequences

2016-06-26T17:57:13Z

As some race conditions are identified in the termination process of tasklets, enforce the atmel_shutdown() sequence. This way we make sure that no new tasklets or software timer are scheduled during shutdown process. An atomic flag is positioned to give this information throughout the code. We also remove tasklet_disable() calls that were leading to deadlocks while stopping the driver. A simpler init/kill sequence is used. Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Stop transfers in sci_shutdown()

2016-06-26T17:57:13Z

Make sure the transmitter and receiver are stopped when shutting down the port, and related interrupts are disabled. Without this: - New input data may be received into the RX FIFO, possibly triggering a new RX DMA completion, - Transfers will still be enabled on a subsequent startup of the UART, before the UART's FIFOs have been reset, causing reading of stale data. Inspired by a patch in the BSP by Koji Matsuoka . Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman