linux/drivers/tty/serial, branch v6.3

tty: serial: sh-sci: Fix Rx on RZ/G2L SCI

2023-03-29T09:00:37Z

SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI IPs on the SH platform. Currently, it does regshift and configuring Rx wrongly. Drop adding regshift for RZ/G2L alike SoCs. Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports") Cc: stable@vger.kernel.org Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active

2023-03-29T08:59:41Z

For serdev framework, tty->dev is a NULL pointer, lpuart_uport_is_active calling device_may_wakeup() may cause kernel NULL pointer crash, so here add the NULL pointer check before using it. Fixes: 4f5cb8c5e915 ("tty: serial: fsl_lpuart: enable wakeup source for lpuart") Cc: stable Signed-off-by: Sherry Sun Link: https://lore.kernel.org/r/20230323110923.24581-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman

tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty

2023-03-29T08:59:29Z

According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to avoid checking for transmission complete when UARTCTRL_SBK is asserted, otherwise the lpuart32_tx_empty may never get TIOCSER_TEMT. Commit 2411fd94ceaa("tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted") only fix it in lpuart32_set_termios(), here also fix it in lpuart32_tx_empty(). Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable Signed-off-by: Sherry Sun Link: https://lore.kernel.org/r/20230323054415.20363-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman

serial: 8250: Prevent starting up DMA Rx on THRI interrupt

2023-03-29T08:59:11Z

Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART connection failed due corrupted Rx payload. The problem was narrowed down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs despite LSR having DR bit set, which is precondition for attempting to start DMA Rx in the first place. From a debug patch: [x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0 [x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0 [x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0 [x.808870] Bluetooth: hci0: Frame reassembly failed (-84) In the debug snippet, received field indicates 1 byte was transferred over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA handled was corrupted (gets zeroed) which leads to the HCI failure. This problem became apparent after commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop is now triggered from a THRI interrupt. Despite that this problem looks like a HW bug, this fix is not adding UART_BUG_xx flag to the driver beucase it seems useful in general to avoid starting DMA when there are only a few bytes to transfer. Skipping DMA for small transfers avoids the extra overhead DMA incurs. Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent interrupt which has Rx a related IIR value. By returning false from handle_rx_dma(), the DMA vs non-DMA decision is postponed until either UART_IIR_RDI (FIFO threshold worth of bytes awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a later time which allows better to discern whether the number of bytes warrants starting DMA or not. Reported-by: Hans de Goede Tested-by: Hans de Goede Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Acked-by: Hans de Goede Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

tty: serial: sh-sci: Fix transmit end interrupt handler

2023-03-29T08:58:14Z

The fourth interrupt on SCI port is transmit end interrupt compared to the break interrupt on other port types. So, shuffle the interrupts to fix the transmit end interrupt handler. Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI") Cc: stable Suggested-by: Geert Uytterhoeven Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-03-19T17:09:58Z

Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"

serial: sc16is7xx: Convert to i2c's .probe_new()

2023-03-09T20:58:53Z

.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

serial: qcom-geni: drop bogus uart_write_wakeup()

2023-03-09T16:27:53Z

Drop the bogus uart_write_wakeup() from when setting up a new DMA transfer, which does not free up any more space in the ring buffer. Any pending writers will be woken up when the transfer completes. Cc: stable Signed-off-by: Johan Hovold Reviewed-by: Douglas Anderson Reviewed-by: Srinivas Kandagatla Tested-by: Srinivas Kandagatla Reviewed-by: Andrew Halaney Tested-by: Andrew Halaney # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: fix mapping of empty DMA buffer

2023-03-09T16:27:50Z

Make sure that there is data in the ring buffer before trying to set up a zero-length DMA transfer. This specifically fixes the following warning when unmapping the empty buffer on the sc8280xp-crd: WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8 ... Call trace: iommu_dma_unmap_page+0xbc/0xd8 dma_unmap_page_attrs+0x30/0x1c8 geni_se_tx_dma_unprep+0x28/0x38 qcom_geni_serial_isr+0x358/0x75c Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable Cc: Bartosz Golaszewski Signed-off-by: Johan Hovold Reviewed-by: Douglas Anderson Reviewed-by: Srinivas Kandagatla Tested-by: Srinivas Kandagatla Reviewed-by: Andrew Halaney Tested-by: Andrew Halaney # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: fix DMA mapping leak on shutdown

2023-03-09T16:27:47Z

Fix what appears to be a copy-paste error that can lead to a leaked DMA mapping on close() and failure to restart TX after the port is reopened. Note that rx_dma_addr is generally NULL when qcom_geni_serial_stop_tx_dma() is called as part of shutdown() (but tx_dma_addr need not be). Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable Cc: Bartosz Golaszewski Signed-off-by: Johan Hovold Reviewed-by: Douglas Anderson Reviewed-by: Srinivas Kandagatla Tested-by: Srinivas Kandagatla Reviewed-by: Andrew Halaney Tested-by: Andrew Halaney # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman