linux/drivers/tty, branch v5.5

serdev: Don't claim unsupported ACPI serial devices

2020-01-06T19:00:44Z

Serdev sub-system claims all ACPI serial devices that are not already initialised. As a result, no device node is created for serial ports on certain boards such as the Apollo Lake based UP2. This has the unintended consequence of not being able to raise the login prompt via serial connection. Introduce a blacklist to reject ACPI serial devices that should not be claimed by serdev sub-system. Add the peripheral ids for Intel HS UART to the blacklist to bring back serial port on SoCs carrying them. Cc: stable@vger.kernel.org Signed-off-by: Punit Agrawal Acked-by: Hans de Goede Acked-by: Johan Hovold Cc: Rob Herring Link: https://lore.kernel.org/r/20191219100345.911093-1-punit1.agrawal@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman

tty: always relink the port

2019-12-30T18:34:44Z

If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port. Fixes: fb2b90014d78 ("tty: link tty and port before configuring it as console") Reported-by: Kenneth R. Crudup Signed-off-by: Sudip Mukherjee Cc: stable Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: fix out of range clock divider handling

2019-12-17T13:17:32Z

Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored. Fix by doing the baud rate calulation before setting the mode. Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support") Signed-off-by: David Engraf Acked-by: Ludovic Desroches Acked-by: Richard Genoud Cc: stable Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com Signed-off-by: Greg Kroah-Hartman

tty: link tty and port before configuring it as console

2019-12-17T13:12:34Z

There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that: 6.650130: uart_add_one_port 6.663849: register_console 6.664846: tty_open 6.674391: tty_init_dev 6.675456: tty_port_link_device uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev(). Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this. Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet. Suggested-by: Jiri Slaby Signed-off-by: Sudip Mukherjee Cc: stable Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: sprd: Add clearing break interrupt operation

2019-12-12T13:26:59Z

A break interrupt will be generated if the RX line was pulled low, which means some abnomal behaviors occurred of the UART. In this case, we still need to clear this break interrupt status, otherwise it will cause irq storm to crash the whole system. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Yonghan Ye Cc: stable Signed-off-by: Baolin Wang Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.1575460601.git.baolin.wang7@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: serial: msm_serial: Fix lockup for sysrq and oops

2019-12-12T13:26:59Z

As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug") has mentioned the uart driver might cause recursive locking between normal printing and the kernel debugging facilities (e.g. sysrq and oops). In the commit it gave out suggestion for fixing recursive locking issue: "The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case." This patch follows the suggestion (also used the exactly same code with other serial drivers, e.g. amba-pl011.c) to fix the recursive locking issue, this can avoid stuck caused by deadlock and print out log for sysrq and oops. Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Leo Yan Reviewed-by: Jeffrey Hugo Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2019-12-03T22:09:14Z

Pull tty/serial updates from Greg KH: "Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit later in the merge window than normal as I wanted to make sure some last-minute patches applied to it were all sane. They seem to be :) There's a lot of little stuff in here, for the tty core, and for lots of serial drivers: - reverts of uartlite serial driver patches that were wrong - msm-serial driver fixes - serial core updates and fixes - tty core fixes - serial driver dma mapping api changes - lots of other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" vcs: prevent write access to vcsu devices tty: vt: keyboard: reject invalid keycodes tty: don't crash in tty_init_dev when missing tty_port serial: stm32: fix clearing interrupt error flags tty: Fix Kconfig indentation, continued serial: serial_core: Perform NULL checks for break_ctl ops tty: remove unused argument from tty_open_by_driver() tty: Fix Kconfig indentation {tty: serial, nand: onenand}: samsung: rename to fix build warning serial: ifx6x60: add missed pm_runtime_disable serial: pl011: Fix DMA ->flush_buffer() Revert "serial-uartlite: Move the uart register" Revert "serial-uartlite: Add get serial id if not provided" Revert "serial-uartlite: Do not use static struct uart_driver out of probe()" Revert "serial-uartlite: Add runtime support" Revert "serial-uartlite: Change logic how console_port is setup" Revert "serial-uartlite: Use allocated structure instead of static ones" tty: serial: msm_serial: Use dma_request_chan() directly for channel request tty: serial: tegra: Use dma_request_chan() directly for channel request ...

Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2019-12-03T21:58:22Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

2019-12-01T21:46:15Z

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...

Merge branch 'pci/resource'

2019-11-28T14:54:36Z

- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal