linux/drivers/tty, branch v6.17

Merge tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2025-09-14T17:54:54Z

Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.17-rc6 that resolve some reported problems. Included in here are: - 8250 driver dt bindings fixes - broadcom serial driver binding fixes - hvc_console bugfix - xilinx serial driver bugfix - sc16is7xx serial driver bugfix All of these have been in linux-next for the past week with no reported issues" * tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: xilinx_uartps: read reg size from DTS tty: hvc_console: Call hvc_kick in hvc_write unconditionally dt-bindings: serial: 8250: allow "main" and "uart" as clock names dt-bindings: serial: 8250: move a constraint dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks serial: sc16is7xx: fix bug in flow control levels init

serial: xilinx_uartps: read reg size from DTS

2025-09-06T13:51:47Z

Current implementation uses `CDNS_UART_REGISTER_SPACE(0x1000)` for request_mem_region() and ioremap() in cdns_uart_request_port() API. The cadence/xilinx IP has register space defined from offset 0x0 to 0x48. It also mentions that the register map is defined as [6:0]. So, the upper region may/maynot be used based on the IP integration. In Axiado AX3000 SoC two UART instances are defined 0x100 apart. That is creating issue in some other instance due to overlap with addresses. Since, this address space is already being defined in the devicetree, use the same when requesting the register space. Fixes: 1f7055779001 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board") Acked-by: Michal Simek Signed-off-by: Harshit Shah Link: https://lore.kernel.org/r/20250902-xilinx-uartps-reg-size-v3-1-d11cfa7258e3@axiado.com Signed-off-by: Greg Kroah-Hartman

tty: hvc_console: Call hvc_kick in hvc_write unconditionally

2025-08-17T10:50:30Z

After hvc_write completes, call hvc_kick also in the case the output buffer has been drained, to ensure tty_wakeup gets called. This fixes that functions which wait for a drained buffer got stuck occasionally. Cc: stable Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1230062 Signed-off-by: Fabian Vogt Link: https://lore.kernel.org/r/2011735.PYKUYFuaPT@fvogt-thinkpad Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: fix bug in flow control levels init

2025-08-14T10:08:35Z

When trying to set MCR[2], XON1 is incorrectly accessed instead. And when writing to the TCR register to configure flow control levels, we are incorrectly writing to the MSR register. The default value of $00 is then used for TCR, which means that selectable trigger levels in FCR are used in place of TCR. TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2] to be set. EFR[4] is already set in probe(). MCR access requires LCR[7] to be zero. Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly accessed instead because MCR shares the same address space as XON1. Since MCR[2] is unmodified and still zero, when writing to TCR we are in fact writing to MSR because TCR/TLR registers share the same address space as MSR/SPR. Fix by first removing useless reconfiguration of EFR[4] (enable enhanced functions), as it is already enabled in sc16is7xx_probe() since commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed"). Now LCR is $00, which means that MCR access is enabled. Also remove regcache_cache_bypass() calls since we no longer access the enhanced registers set, and TCR is already declared as volatile (in fact by declaring MSR as volatile, which shares the same address). Finally disable access to TCR/TLR registers after modifying them by clearing MCR[2]. Note: the comment about "... and internal clock div" is wrong and can be ignored/removed as access to internal clock div registers (DLL/DLH) is permitted only when LCR[7] is logic 1, not when enhanced features is enabled. And DLL/DLH access is not needed in sc16is7xx_startup(). Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman

module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES

2025-08-11T14:16:36Z

Christoph suggested that the explicit _GPL_ can be dropped from the module namespace export macro, as it's intended for in-tree modules only. It would be possible to restrict it technically, but it was pointed out [2] that some cases of using an out-of-tree build of an in-tree module with the same name are legitimate. But in that case those also have to be GPL anyway so it's unnecessary to spell it out in the macro name. Link: https://lore.kernel.org/all/aFleJN_fE-RbSoFD@infradead.org/ [1] Link: https://lore.kernel.org/all/CAK7LNATRkZHwJGpojCnvdiaoDnP%2BaeUXgdey5sb_8muzdWTMkA@mail.gmail.com/ [2] Suggested-by: Christoph Hellwig Reviewed-by: Shivank Garg Acked-by: David Hildenbrand Acked-by: Nicolas Schier Reviewed-by: Daniel Gomez Reviewed-by: Christian Brauner Signed-off-by: Vlastimil Babka Link: https://lore.kernel.org/20250808-export_modules-v4-1-426945bcc5e1@suse.cz Signed-off-by: Christian Brauner

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06Z

The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski

Merge tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2025-07-31T18:08:55Z

Pull MIPS updates from Thomas Bogendoerfer: - DT updates for ralink, mobileye and atheros/qualcomm - Clean up of mc146818 usage - Speed up delay calibration for CPS - Other cleanups and fixes * tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits) MIPS: Don't use %pK through printk MIPS: Update Joshua Kinard's e-mail address MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller MIPS: mm: tlb-r4k: Uniquify TLB entries on init MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free() mips/malta,loongson2ef: use generic mc146818_get_time function mips: remove redundant macro mc146818_decode_year mips/mach-rm: remove custom mc146818rtc.h file mips: remove unused function mc146818_set_rtc_mmss MIPS: CPS: Optimise delay CPU calibration for SMP MIPS: CPS: Improve mips_cps_first_online_in_cluster() MIPS: disable MMID when not supported by the hardware MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver MIPS: eyeq5_defconfig: add GPIO subsystem & driver MIPS: mobileye: eyeq5: add two GPIO bank nodes MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor MIPS: mobileye: eyeq5: add 5 I2C controller nodes MIPS: eyeq5_defconfig: Update for v6.16-rc1 MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free} mips: boot: use 'targets' instead of extra-y in Makefile ...

Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl

2025-07-30T04:43:08Z

Pull sysctl updates from Joel Granados: - Move sysctls out of the kern_table array This is the final move of ctl_tables into their respective subsystems. Only 5 (out of the original 50) will remain in kernel/sysctl.c file; these handle either sysctl or common arch variables. By decentralizing sysctl registrations, subsystem maintainers regain control over their sysctl interfaces, improving maintainability and reducing the likelihood of merge conflicts. - docs: Remove false positives from check-sysctl-docs Stopped falsely identifying sysctls as undocumented or unimplemented in the check-sysctl-docs script. This script can now be used to automatically identify if documentation is missing. * tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits) docs: Downgrade arm64 & riscv from titles to comment docs: Replace spaces with tabs in check-sysctl-docs docs: Remove colon from ctltable title in vm.rst docs: Add awk section for ucount sysctl entries docs: Use skiplist when checking sysctl admin-guide docs: nixify check-sysctl-docs sysctl: rename kern_table -> sysctl_subsys_table kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c uevent: mv uevent_helper into kobject_uevent.c sysctl: Removed unused variable sysctl: Nixify sysctl.sh sysctl: Remove superfluous includes from kernel/sysctl.c sysctl: Remove (very) old file changelog sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c sysctl: move cad_pid into kernel/pid.c sysctl: Move tainted ctl_table into kernel/panic.c Input: sysrq: mv sysrq into drivers/tty/sysrq.c fork: mv threads-max into kernel/fork.c parisc/power: Move soft-power into power.c mm: move randomize_va_space into memory.c ...

Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2025-07-29T17:11:01Z

Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues" * tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain serial: 8250: fix panic due to PSLVERR dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible vt: defkeymap: Map keycodes above 127 to K_HOLE vt: keyboard: Don't process Unicode characters in K_OFF mode serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: qcom-geni: move clock-rate logic to separate function serial: qcom-geni: move resource control logic to separate functions serial: qcom-geni: move resource initialization to separate function soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms dt-bindings: qcom: geni-se: describe SA8255p dt-bindings: serial: describe SA8255p serial: 8250_dw: Fix typo "notifer" dt-bindings: serial: 8250: spacemit: set clocks property as required dt-bindings: serial: renesas: Document RZ/V2N SCIF serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build tty: omit need_resched() before cond_resched() serial: 8250_ni: Reorder local variables serial: 8250_ni: Fix build warning ...

Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2025-07-29T03:13:36Z

Pull power management updates from Rafael Wysocki: "As is tradition, cpufreq is the part with the largest number of updates that include core fixes and cleanups as well as updates of several assorted drivers, but there are also quite a few updates related to system sleep, mostly focused on asynchronous suspend and resume of devices and on making the integration of system suspend and resume with runtime PM easier. Runtime PM is also updated to allow some code duplication in drivers to be eliminated going forward and to work more consistently overall in some cases. Apart from that, there are some driver core updates related to PM domains that should help to address ordering issues with devm_ cleanup routines relying on PM domains, some assorted devfreq updates including core fixes and cleanups, tooling updates, and documentation and MAINTAINERS updates. Specifics: - Fix two initialization ordering issues in the cpufreq core and a governor initialization error path in it, and clean it up (Lifeng Zheng) - Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq driver (Li RongQing) - Make intel_pstate always use HWP_DESIRED_PERF when operating in the passive mode (Rafael Wysocki) - Allow building the tegra124 cpufreq driver as a module (Aaron Kling) - Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn) - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter, Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng) - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant Malani) - Fix minimum performance state label error in the amd-pstate driver documentation (Shouye Liu) - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq governor and explain HW coordination influence on it in the documentation (Shashank Balaji) - Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle driver (Yury Norov) - Remove info about non-existing QoS interfaces from the PM QoS documentation (Ulf Hansson) - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu) - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan) - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan) - Simplify the sun8i-a33-mbus devfreq driver by using more devm functions (Uwe Kleine-König) - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi) - Check devfreq governor before using governor->name (Lifeng Zheng) - Remove a redundant devfreq_get_freq_range() call from devfreq_add_device() (Lifeng Zheng) - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng) - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng) - Extend the asynchronous suspend and resume of devices to handle suppliers like parents and consumers like children (Rafael Wysocki) - Make pm_runtime_force_resume() work for drivers that set the DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that collaborate with the general ACPI PM domain to set it (Rafael Wysocki) - Add kernel parameter to disable asynchronous suspend/resume of devices (Tudor Ambarus) - Drop redundant might_sleep() calls from some functions in the device suspend/resume core code (Zhongqiu Han) - Fix the handling of monitors connected right before waking up the system from sleep (tuhaowen) - Clean up MAINTAINERS entries for suspend and hibernation (Rafael Wysocki) - Fix error code path in the KEXEC_JUMP flow and drop a redundant pm_restore_gfp_mask() call from it (Rafael Wysocki) - Rearrange suspend/resume error handling in the core device suspend and resume code (Rafael Wysocki) - Fix up white space that does not follow coding style in the hibernation core code (Darshan Rathod) - Document return values of suspend-related API functions in the runtime PM framework (Sakari Ailus) - Mark last busy stamp in multiple autosuspend-related functions in the runtime PM framework and update its documentation (Sakari Ailus) - Take active children into account in pm_runtime_get_if_in_use() for consistency (Rafael Wysocki) - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu power capping driver (Sivan Zohar-Kotzer) - Add support for the Bartlett Lake platform to the Intel RAPL power capping driver (Qiao Wei) - Add PL4 support for Panther Lake to the intel_rapl_msr power capping driver (Zhang Rui) - Update contact information in the PM ABI docs and maintainer information in the power domains DT binding (Rafael Wysocki) - Update PM header inclusions to follow the IWYU (Include What You Use) principle (Andy Shevchenko) - Add flags to specify power on attach/detach for PM domains, make the driver core detach PM domains in device_unbind_cleanup(), and drop the dev_pm_domain_detach() call from the platform bus type (Claudiu Beznea) - Improve Python binding's Makefile for cpupower (John B. Wyatt IV) - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)" * tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag PM: docs: Use my kernel.org address in ABI docs and DT bindings PM: hibernate: Fix up white space that does not follow coding style PM: sleep: Rearrange suspend/resume error handling in the core Documentation: amd-pstate:fix minimum performance state label error PM: runtime: Take active children into account in pm_runtime_get_if_in_use() kexec_core: Drop redundant pm_restore_gfp_mask() call kexec_core: Fix error code path in the KEXEC_JUMP flow PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation drivers: cpufreq: add Tegra114 support rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs cpufreq: Exit governor when failed to start old governor cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() cpufreq: Init policy->rwsem before it may be possibly used cpufreq: Initialize cpufreq-based frequency-invariance later cpufreq: Remove duplicate check in __cpufreq_offline() cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode PM / devfreq: Add HiSilicon uncore frequency scaling driver ...