linux/drivers/usb/chipidea, branch for-next

usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()

2024-12-23T17:51:27Z

Current implementation of ci_hdrc_imx_driver does not decrement the refcount of the device obtained in usbmisc_get_init_data(). Add a put_device() call in .remove() and in .probe() before returning an error. This bug was found by an experimental static analysis tool that I am developing. Cc: stable Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs") Signed-off-by: Joe Hattori Acked-by: Peter Chen Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: add imx8ulp support

2024-11-12T11:15:04Z

The dtbinding have imx7ulp and imx8ulp compatible with imx7d before. And then the dtb follow the dtbinding. However, the driver doesn't add imx8ulp compatible now. To make imx8ulp work well, this will add support for it. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20241111090916.1534047-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: Use (of|device)_property_present() for non-boolean properties

2024-11-05T12:29:26Z

The use of (of|device)_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) Acked-by: Peter Chen Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20241104190820.277702-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: improve error recovery for ISO transfer

2024-10-04T13:14:09Z

Impove device mode ISO transfer error tolerant by reprime the corresponding endpoint. The recovery steps when error occurs: - Delete the error dTD from dQH and giveback request to user. - Do reprime if dQH is not empty. - Do prime when new dTD is queued if dQH is empty Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240926022906.473319-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: improve dTD link logic

2024-10-04T13:14:09Z

Currently, ATDTW semaphore is used to safety link new dTD to dQH. But this code has a bug when the endpoint is already in error before polling ATDTW or just met error during polling ATDTW. In that cases, ATDTW will never turn to 1 and the cpu will busy loop there. When the endpoint met error, ENDPTSTAT will be cleared by HW. Therefore, ENDPTSTAT should also be considered during this process. In case of endpoint error, the current dTD should not be pushed to the head of dQH since some dTDs may be still not executed. Therefore, the link logic is also improved accordingly. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240926022906.473319-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: handle USB Error Interrupt if IOC not set

2024-10-04T13:14:09Z

As per USBSTS register description about UEI: When completion of a USB transaction results in an error condition, this bit is set by the Host/Device Controller. This bit is set along with the USBINT bit, if the TD on which the error interrupt occurred also had its interrupt on complete (IOC) bit set. UI is set only when IOC set. Add checking UEI to fix miss call isr_tr_complete_handler() when IOC have not set and transfer error happen. Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: create bounce buffer for problem sglist entries if possible

2024-10-04T13:13:58Z

The chipidea controller doesn't fully support sglist, such as it can not transfer data spanned more dTDs to form a bus packet, so it can only work on very limited cases. The limitations as below: 1. the end address of the first sg buffer must be 4KB aligned. 2. the start and end address of the middle sg buffer must be 4KB aligned. 3. the start address of the first sg buffer must be 4KB aligned. However, not all the use cases violate these limitations. To make the controller compatible with most of the cases, this will try to bounce the problem sglist entries which can be found by sglist_get_invalid_entry(). Then a bounced line buffer (the size will roundup to page size) will be allocated to replace the remaining problem sg entries. The data will be copied between problem sg entries and bounce buffer according to the transfer direction. The bounce buffer will be freed when the request completed. Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240923081203.2851768-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: limit usb request length to max 16KB

2024-10-04T13:13:58Z

To let the device controller work properly on short packet limitations, one usb request should only correspond to one dTD. Then every dTD will set IOC. In theory, each dTD support up to 20KB data transfer if the offset is 0. Due to we cannot predetermine the offset, this will limit the usb request length to max 16KB. This should be fine since most of the user transfer data based on this size policy. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

2024-10-04T13:13:58Z

Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: Switch back to struct platform_driver::remove()

2024-10-04T13:13:03Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/usb to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman