linux/drivers/usb/class, branch v2.6.38

USB: cdc-acm: Adding second ACM channel support for Nokia N8

2011-02-04T20:38:14Z

This adds the N8 to the list of devices in cdc-acm, in order to get the secondary ACM device exposed. In the spirit of: http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554 Signed-off-by: Arvid Ephraim Picciani Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: cdc-wdm: fix misuse of logical operation in place of bitop

2011-01-23T02:32:55Z

CC: Greg Kroah-Hartman CC: Oliver Neukum CC: Marcel Holtmann Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2010-10-23T03:30:48Z

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.

USB: cdc-acm: fix code indentation

2010-10-22T17:21:57Z

Signed-off-by: Otavio Salvador Signed-off-by: Greg Kroah-Hartman

llseek: automatically add .llseek fop

2010-10-15T13:53:27Z

All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann Cc: Julia Lawall Cc: Christoph Hellwig

USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors.

2010-09-04T00:33:41Z

Certain USB devices, such as the Nokia X6 mobile phone, don't expose any endpoint descriptors on some of their interfaces. If the ACM driver is forced to probe all interfaces on a device the a NULL pointer dereference will occur when the ACM driver attempts to use the endpoint of the alternative settings. One way to get the ACM driver to probe all the interfaces is by using the /sys/bus/usb/drivers/cdc_acm/new_id interface. This patch checks that the endpoint pointer for the current alternate settings is non-NULL before using it. Signed-off-by: Toby Gray Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: Add pseudo modem without AT command capabilities

2010-09-04T00:33:41Z

cdc-acm.c : Manage pseudo-modem without AT commands capabilities Enable to drive electronic simple gadgets based on microcontrolers. The Interface descriptor is like this: bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None Signed-off-by: Philippe Corbes Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: Adding second ACM channel support for various Nokia and one Samsung phones

2010-09-04T00:33:41Z

S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem with a standard AT-command interface, which is picked up correctly by CDC-ACM. The second ACM port is marked as having a vendor-specific protocol. This means that the ACM driver will not claim the second channel by default. This adds support for the second ACM channel for the following devices: Nokia E63 Nokia E75 Nokia 6760 Slide Nokia E52 Nokia E55 Nokia E72 Nokia X6 Nokia N97 Mini Nokia 5800 Xpressmusic Nokia E90 Samsung GTi8510 (INNOV8) Signed-off-by: Toby Gray Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2010-08-10T22:05:02Z

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits) USB: serial: fix stalled writes USB: remove fake "address-of" expressions USB: fix thread-unsafe anchor utiliy routines USB: usbtest: support test device with only one iso-in or iso-out endpoint USB: usbtest: avoid to free coherent buffer in atomic context USB: xhci: Set DMA mask for host. USB: xhci: Don't flush doorbell writes. USB: xhci: Reduce reads and writes of interrupter registers. USB: xhci: Make xhci_set_hc_event_deq() static. USB: xhci: Minimize HW event ring dequeue pointer writes. USB: xhci: Make xhci_handle_event() static. USB: xhci: Remove unnecessary reads of IRQ_PENDING register. USB: xhci: Performance - move xhci_work() into xhci_irq() USB: xhci: Performance - move interrupt handlers into xhci-ring.c USB: xhci: Performance - move functions that find ep ring. USB:: fix linux/usb.h kernel-doc warnings USB: add USB serial ssu100 driver USB: usb-storage: implement autosuspend USB: ehci: fix remove of ehci debugfs dir USB: Add USB 2.0 to ssb ohci driver ...

USB: usblp: fixed switch, brace, whitespace and spacing coding style issues

2010-08-10T21:35:38Z

Fixed switch, brace, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser Acked-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman