linux/drivers/usb/class, branch v5.2

USB: cdc-acm: clean up throttle handling

2019-04-29T14:14:41Z

Clean up the throttle implementation by dropping the redundant throttle_req flag which was a remnant from back when USB serial had only a single read URB, something which was later carried over to cdc-acm. Also convert the throttled flag to an atomic bit flag. Signed-off-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: fix unthrottle races

2019-04-29T14:14:41Z

Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Also note that the first race was fixed by 36e59e0d70d6 ("cdc-acm: fix race between callback and unthrottle") back in 2015, but the bug was reintroduced a year later. Fixes: 1aba579f3cf5 ("cdc-acm: handle read pipe errors") Fixes: 088c64f81284 ("USB: cdc-acm: re-write read processing") Signed-off-by: Johan Hovold Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: fix race during wakeup blocking TX traffic

2019-03-27T15:08:49Z

When the kernel is compiled with preemption enabled, the URB completion handler can run in parallel with the work responsible for waking up the tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the call to tty_port_tty_wakeup() to signal that there is room for additional input, it will be cleared at the end of this call. As a result, TX traffic on the upper layer will be blocked. This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast modem connected with PPP running over a USB CDC-ACM port. Use test_and_clear_bit() instead, which ensures that each wakeup requested by the URB completion code will trigger a call to tty_port_tty_wakeup(). Fixes: 1aba579f3cf5 cdc-acm: handle read pipe errors Signed-off-by: Romain Izard Cc: stable Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

cdc-wdm: pass return value of recover_from_urb_loss

2019-02-19T13:41:38Z

'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d562fd7 ("USB: autosuspend for cdc-wdm") Signed-off-by: YueHaibing Signed-off-by: Greg Kroah-Hartman

USB: add missing SPDX lines to Kconfig and Makefiles

2019-01-22T08:08:17Z

There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: send ZLP for Telit 3G Intel based modems

2019-01-07T16:23:29Z

Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.

2018-12-20T15:38:52Z

Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by: Macpaul Lin Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: add entry for Hiro (Conexant) modem

2018-11-20T11:12:06Z

The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-10-26T15:14:13Z

Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...

Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-10-24T13:43:41Z

Pull tty ioctl updates from Al Viro: "This is the compat_ioctl work related to tty ioctls. Quite a bit of dead code taken out, all tty-related stuff gone from fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain, but all more or less generic tty-related ioctls should be covered (remaining issues are in things like driver-private ioctls in a pcmcia serial card driver not getting properly handled in 32bit processes on 64bit host, etc)" * 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits) kill TIOCSERGSTRUCT change semantics of ldisc ->compat_ioctl() kill TIOCSER[SG]WILD synclink_gt(): fix compat_ioctl() pty: fix compat ioctls compat_ioctl - kill keyboard ioctl handling gigaset: add ->compat_ioctl() vt_compat_ioctl(): clean up, use compat_ptr() properly gigaset: don't try to printk userland buffer contents dgnc: don't bother with (empty) stub for TCXONC dgnc: leave TIOC[GS]SOFTCAR to ldisc remove fallback to drivers for TIOCGICOUNT dgnc: break-related ioctls won't reach ->ioctl() kill the rest of tty COMPAT_IOCTL() entries dgnc: TIOCM... won't reach ->ioctl() isdn_tty: TCSBRK{,P} won't reach ->ioctl() kill capinc_tty_ioctl() take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() synclink: reduce pointless checks in ->ioctl() complete ->[sg]et_serial() switchover ...