linux/drivers/usb/class, branch v6.0

USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

2022-08-19T09:12:43Z

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Thierry GUIBERT Cc: stable Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: use CDC serial-state defines

2022-07-25T08:57:41Z

Use the new CDC serial-state defines. Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20220725075841.1187-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: use CDC control-line defines

2022-07-25T08:57:41Z

Use the new CDC control-line defines. Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20220725075841.1187-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: use define for timeout

2022-06-29T19:02:28Z

We have a symbolic name for the standard timeout. Use it. No functional change intended. Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20220629132638.31810-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

tty: remove CMSPAR ifdefs

2022-05-19T16:26:16Z

CMSPAR is defined by all architectures since commit 6bf08cb246b5 ("[PATCH] Add CMSPAR to termbits.h for powerpc and alpha"). Reviewed-by: Johan Hovold Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220513082906.11096-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: fix reading stuck on device close

2022-05-05T20:17:43Z

cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov Cc: stable Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: usbtmc: Fix bug in pipe direction for control transfers

2022-03-15T17:45:31Z

The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix. CC: Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

tty: tty_io: Switch to vmalloc() fallback in case of TTY_NO_WRITE_SPLIT

2021-12-21T08:18:44Z

When TTY_NO_WRITE_SPLIT is set and 64 KiB chunks are used, allow vmalloc() fallback. Supply __GFP_RETRY_MAYFAIL to make kmalloc() preferable over vmalloc() since we may want a better performance. Note, both current users copy data to another buffer anyway, so the type of our allocation doesn't affect their expectations. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211220133250.3070-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge 5.15-rc5 into usb-next

2021-10-11T05:39:38Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: fix break reporting

2021-10-05T11:50:52Z

A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman