linux/drivers/usb/core/message.c, branch v5.4

USB: CDC: fix sanity checks in CDC union parser

2019-08-15T12:49:16Z

A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

USB: core: Fix unterminated string returned by usb_string()

2019-04-16T10:23:01Z

Some drivers (such as the vub300 MMC driver) expect usb_string() to return a properly NUL-terminated string, even when an error occurs. (In fact, vub300's probe routine doesn't bother to check the return code from usb_string().) When the driver goes on to use an unterminated string, it leads to kernel errors such as stack-out-of-bounds, as found by the syzkaller USB fuzzer. An out-of-range string index argument is not at all unlikely, given that some devices don't provide string descriptors and therefore list 0 as the value for their string indexes. This patch makes usb_string() return a properly terminated empty string along with the -EINVAL error code when an out-of-range index is encountered. And since a USB string index is a single-byte value, indexes >= 256 are just as invalid as values of 0 or below. Signed-off-by: Alan Stern Reported-by: syzbot+b75b85111c10b8d680f1@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman

usb: core: skip interfaces disabled in devicetree

2019-02-20T10:29:01Z

If an interface has an associated devicetree node with status disabled, do not register the device. This is useful for boards with a built-in multifunction USB device where some functions are broken or otherwise undesired. Signed-off-by: Mans Rullgard Signed-off-by: Greg Kroah-Hartman

USB: Consolidate LPM checks to avoid enabling LPM twice

2019-01-18T09:02:56Z

USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working after S3: [ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110) After some experiments, I found that disabling LPM can workaround the issue. On some platforms, the USB power is cut during S3, so the driver uses reset-resume to resume the device. During port resume, LPM gets enabled twice, by usb_reset_and_verify_device() and usb_port_resume(). Consolidate all checks into new LPM helpers to make sure LPM only gets enabled once. Fixes: de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.”) Signed-off-by: Kai-Heng Feng Cc: stable # after much soaking Signed-off-by: Greg Kroah-Hartman

USB: Add new USB LPM helpers

2019-01-18T09:02:56Z

Use new helpers to make LPM enabling/disabling more clear. This is a preparation to subsequent patch. Signed-off-by: Kai-Heng Feng Cc: stable # after much soaking Signed-off-by: Greg Kroah-Hartman

usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()

2018-09-05T12:36:53Z

The steps taken by usb core to set a new interface is very different from what is done on the xHC host side. xHC hardware will do everything in one go. One command is used to set up new endpoints, free old endpoints, check bandwidth, and run the new endpoints. All this is done by xHC when usb core asks the hcd to check for available bandwidth. At this point usb core has not yet flushed the old endpoints, which will cause use-after-free issues in xhci driver as queued URBs are cancelled on a re-allocated endpoint. To resolve this add a call to usb_disable_interface() which will flush the endpoints before calling usb_hcd_alloc_bandwidth() Additional checks in xhci driver will also be implemented to gracefully handle stale URB cancel on freed and re-allocated endpoints Cc: Reported-by: Sudip Mukherjee Signed-off-by: Mathias Nyman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: core: use irqsave() in sg_complete() complete callback

2018-06-28T10:36:06Z

The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

treewide: kmalloc() -> kmalloc_array()

2018-06-12T23:19:22Z

The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook

usb: core: message: remove extra endianness conversion in usb_set_isoch_delay

2018-05-31T10:43:14Z

No need to do extra endianness conversion in usb_set_isoch_delay because it is already done in usb_control_msg() Fixes: 886ee36e7205 ("usb: core: add support for USB_REQ_SET_ISOCH_DELAY") Cc: Dmytro Panchenko Cc: Felipe Balbi Cc: stable # v4.16+ Signed-off-by: Ruslan Bilovol Signed-off-by: Greg Kroah-Hartman

usb: quirks: add control message delay for 1b1c:1b20

2018-03-06T17:17:34Z

Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman