linux/drivers/usb/core, branch v5.2

USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.

2019-06-05T09:52:42Z

This patch fixes the chipmunk-like voice that manifets randomly when using the integrated mic of the Logitech Webcam HD C270. The issue was solved initially for this device by commit 2394d67e446b ("USB: add RESET_RESUME for webcams shown to be quirky") but it was then reintroduced by e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams"). This patch is to have the fix back. Signed-off-by: Marco Zatta Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: Add LPM quirk for Surface Dock GigE adapter

2019-05-21T08:08:56Z

Without USB_QUIRK_NO_LPM ethernet will not work and rtl8152 will complain with r8152 : Stop submitting intr, status -71 Adding the quirk resolves this. As the dock is externally powered, this should not have any drawbacks. Signed-off-by: Maximilian Luz Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor

2019-05-21T08:08:55Z

The syzkaller USB fuzzer found a slab-out-of-bounds write bug in the USB core, caused by a failure to check the actual size of a BOS descriptor. This patch adds a check to make sure the descriptor is at least as large as it is supposed to be, so that the code doesn't inadvertently access memory beyond the end of the allocated region when assigning to dev->bos->desc->bNumDeviceCaps later on. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+71f1e64501a309fcc012@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-05-08T17:03:52Z

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...

Merge tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-05-03T16:05:27Z

Felipe writes: USB: changes for v5.2 merge window With a total of 50 non-merge commits, this is not a large pull request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%) with the rest of it scattered among other UDCs, function drivers and device-tree bindings. No really big feature this time around apart from support to Amlogic being added to both dwc3 and dwc2 drivers. * tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block usb: dwc3: Free resource immediately after use usb: dwc3: of-simple: Convert to bulk clk API usb: dwc2: Delayed status support usb: gadget: udc: lpc32xx: rework interrupt handling ...

usb: introduce usb_ep_type_string() function

2019-05-03T06:13:48Z

In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun Signed-off-by: Felipe Balbi

USB: Export usb_wakeup_enabled_descendants()

2019-05-03T06:13:47Z

In (e583d9d USB: global suspend and remote wakeup don't mix) we introduced wakeup_enabled_descendants() as a static function. We'd like to use this function in USB controller drivers to know if we should keep the controller on during suspend time, since doing so has a power impact. Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi

usb/hcd: Send a uevent signaling that the host controller had died

2019-04-25T09:07:09Z

This change will send an OFFLINE event to udev with the ERROR=DEAD environment variable set when the HC dies. By notifying user space the appropriate policies can be applied. i.e., * Collect error logs. * Notify the user that USB is no longer functional. * Perform a graceful reboot. Reported-by: kbuild test robot Signed-off-by: Raul E Rangel Signed-off-by: Greg Kroah-Hartman

USB: core: Fix bug caused by duplicate interface PM usage counter

2019-04-19T19:15:13Z

The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active: URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363 The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface. Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound. This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation! As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative. It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman

USB: core: Don't unbind interfaces following device reset failure

2019-04-17T12:46:58Z

The SCSI core does not like to have devices or hosts unregistered while error recovery is in progress. Trying to do so can lead to self-deadlock: Part of the removal code tries to obtain a lock already held by the error handler. This can cause problems for the usb-storage and uas drivers, because their error handler routines perform a USB reset, and if the reset fails then the USB core automatically goes on to unbind all drivers from the device's interfaces -- all while still in the context of the SCSI error handler. As it turns out, practically all the scenarios leading to a USB reset failure end up causing a device disconnect (the main error pathway in usb_reset_and_verify_device(), at the end of the routine, calls hub_port_logical_disconnect() before returning). As a result, the hub_wq thread will soon become aware of the problem and will unbind all the device's drivers in its own context, not in the error-handler's context. This means that usb_reset_device() does not need to call usb_unbind_and_rebind_marked_interfaces() in cases where usb_reset_and_verify_device() has returned an error, because hub_wq will take care of everything anyway. This particular problem was observed in somewhat artificial circumstances, by using usbfs to tell a hub to power-down a port connected to a USB-3 mass storage device using the UAS protocol. With the port turned off, the currently executing command timed out and the error handler started running. The USB reset naturally failed, because the hub port was off, and the error handler deadlocked as described above. Not carrying out the call to usb_unbind_and_rebind_marked_interfaces() fixes this issue. Signed-off-by: Alan Stern Reported-by: Kento Kobayashi Tested-by: Kento Kobayashi CC: Bart Van Assche CC: Martin K. Petersen CC: Jacky Cao Signed-off-by: Greg Kroah-Hartman