linux/drivers/usb/core, branch v6.4

usb: usbfs: Use consistent mmap functions

2023-05-29T15:14:28Z

When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages. Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated. Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman

usb: usbfs: Enforce page requirements for mmap

2023-05-29T15:14:28Z

The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-04-27T18:42:11Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ...

USB: core: Add routines for endpoint checks in old drivers

2023-04-20T09:43:22Z

Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: core: Fix docs warning caused by wireless_status feature

2023-04-06T15:14:14Z

Fix wrongly named 'dev' parameter in doc block, should have been iface: drivers/usb/core/message.c:1939: warning: Function parameter or member 'iface' not described in 'usb_set_wireless_status' drivers/usb/core/message.c:1939: warning: Excess function parameter 'dev' description in 'usb_set_wireless_status' And fix missing struct member doc in kernel API, and reorder to match struct: include/linux/usb.h:270: warning: Function parameter or member 'wireless_status_work' not described in 'usb_interface' Reported-by: Stephen Rothwell Link: https://lore.kernel.org/linux-next/20230405114807.5a57bf46@canb.auug.org.au/T/#t Fixes: 0a4db185f078 ("USB: core: Add API to change the wireless_status") Signed-off-by: Bastien Nocera Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20230405092754.36579-1-hadess@hadess.net [bentiss: fix checkpatch warning] Signed-off-by: Benjamin Tissoires

USB: core: Add API to change the wireless_status

2023-04-03T11:30:32Z

This adds the API that allows device specific drivers to tell user-space about whether the wireless device is connected to its receiver dongle. See "USB: core: Add wireless_status sysfs attribute" for a detailed explanation of what this attribute should be used for. Signed-off-by: Bastien Nocera Acked-by: Greg Kroah-Hartman Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230302105555.51417-5-hadess@hadess.net Signed-off-by: Benjamin Tissoires

USB: core: Add wireless_status sysfs attribute

2023-04-03T11:30:08Z

Add a wireless_status sysfs attribute to USB devices to keep track of whether a USB device that's comprised of a receiver dongle and an emitter device over a, most of the time proprietary, wireless link has its emitter connected or disconnected. This will be used by user-space OS components to determine whether the battery-powered part of the device is wirelessly connected or not, allowing, for example: - upower to hide the battery for devices where the device is turned off but the receiver plugged in, rather than showing 0%, or other values that could be confusing to users - Pipewire to hide a headset from the list of possible inputs or outputs or route audio appropriately if the headset is suddenly turned off, or turned on - libinput to determine whether a keyboard or mouse is present when its receiver is plugged in. This is done at the USB interface level as: - the interface on which the wireless status is detected is sometimes not the same as where it could be consumed (eg. the audio interface on a headset dongle will still appear even if the headset is turned off), and we cannot have synchronisation of status across subsystems. - this behaviour is not specific to HID devices, even if the protocols used to determine whether or not the remote device is connected can be HID. This is not an attribute that is meant to replace protocol specific APIs, such as the ones available for WWAN, WLAN/Wi-Fi, or Bluetooth or any other sort of networking, but solely for wireless devices with an ad-hoc “lose it and your device is e-waste” receiver dongle. The USB interface will only be exporting the wireless_status sysfs attribute if it gets set through the API exported in the next commit. Signed-off-by: Bastien Nocera Acked-by: Greg Kroah-Hartman Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230302105555.51417-4-hadess@hadess.net Signed-off-by: Benjamin Tissoires

USB: mark all struct bus_type as const

2023-03-23T12:22:00Z

Now that the driver core can properly handle constant struct bus_type, move all of the USB subsystem struct bus_type structures as const, placing them into read-only memory which can not be modified at runtime. Cc: Johan Hovold Cc: Evan Green Cc: Alan Stern Cc: linux-usb@vger.kernel.org Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230313182918.1312597-36-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

driver core: class: remove module * from class_create()

2023-03-17T14:16:33Z

The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman