linux/drivers/usb/host, branch v5.8

usb: tegra: Fix allocation for the FPCI context

2020-07-23T11:21:01Z

Commit 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") is using the IPFS 'num_offsets' value when allocating memory for FPCI context instead of the FPCI 'num_offsets'. After commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") was added system suspend started failing on Tegra186. The kernel log showed that the Tegra XHCI driver was crashing on entry to suspend when attempting the save the USB context. On Tegra186, the IPFS context has a zero length but the FPCI content has a non-zero length, and because of the bug in the Tegra XHCI driver we are incorrectly allocating a zero length array for the FPCI context. The crash seen on entering suspend when we attempt to save the FPCI context and following commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") this now causes a NULL pointer deference when we access the memory. Fix this by correcting the amount of memory we are allocating for FPCI contexts. Cc: stable@vger.kernel.org Fixes: 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") Signed-off-by: Jon Hunter Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix ASM2142/ASM3142 DMA addressing

2020-07-21T12:05:49Z

The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA addresses, which can cause silent memory corruption or IOMMU errors on platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk to fix this issue. Signed-off-by: Forest Crossman Cc: stable Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix the failure of bandwidth allocation

2020-07-21T12:05:49Z

The wMaxPacketSize field of endpoint descriptor may be zero as default value in alternate interface, and they are not actually selected when start stream, so skip them when try to allocate bandwidth. Cc: stable Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

xhci: Poll for U0 after disabling USB2 LPM

2020-06-24T14:03:41Z

USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Return if xHCI doesn't support LPM

2020-06-24T14:03:41Z

Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-mtk: avoid runtime suspend when removing hcd

2020-06-24T14:03:41Z

When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by: Macpaul Lin Reviewed-by: Chunfeng Yun Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Fix enumeration issue when setting max packet size for FS devices.

2020-06-24T14:03:41Z

Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Fix incorrect EP_STATE_MASK

2020-06-24T14:03:41Z

EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: ohci-sm501: Add missed iounmap() in remove

2020-06-18T08:42:53Z

This driver misses calling iounmap() in remove to undo the ioremap() called in probe. Add the missed call to fix it. Fixes: f54aab6ebcec ("usb: ohci-sm501 driver") Cc: stable Signed-off-by: Chuhong Yuan Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: ehci: reopen solution for Synopsys HC bug

2020-06-18T08:42:52Z

A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which might cause the host controller not issuing ping. Bug description: After indicating an Interrupt on Async Advance, the software uses the doorbell mechanism to delete the Next Link queue head of the last executed queue head. At this time, the host controller still references the removed queue head(the queue head is NULL). NULL reference causes the host controller to lose the USB device. Solution: After deleting the Next Link queue head, when has_synopsys_hc_bug set to 1，the software can write one of the valid queue head addresses to the ASYNCLISTADDR register to allow the host controller to get the valid queue head. in order to solve that problem, this patch set the flag for Huawei Kunpeng920 There are detailed instructions and solutions in this patch: commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug") Signed-off-by: Longfang Liu Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman