linux/drivers/usb/host, branch v6.0

Revert "xhci: turn off port power in shutdown"

2022-08-25T15:48:30Z

This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Add grace period after xHC start to prevent premature runtime suspend.

2022-08-25T15:48:30Z

After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Fix null pointer dereference in remove if xHC has only one roothub

2022-08-25T15:48:30Z

The remove path in xhci platform driver tries to remove and put both main and shared hcds even if only a main hcd exists (one roothub) This causes a null pointer dereference in reboot for those controllers. Check that the shared_hcd exists before trying to remove it. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Alexey Sheplyakov Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220825150840.132216-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix bandwidth release issue

2022-08-19T08:39:08Z

This happens when @udev->reset_resume is set to true, when usb resume, the flow as below: - hub_resume - usb_disable_interface - usb_disable_endpoint - usb_hcd_disable_endpoint - xhci_endpoint_disable // it set @ep->hcpriv to NULL Then when reset usb device, it will drop allocated endpoints, the flow as below: - usb_reset_and_verify_device - usb_hcd_alloc_bandwidth - xhci_mtk_drop_ep but @ep->hcpriv is already set to NULL, the bandwidth will be not released anymore. Due to the added endponts are stored in hash table, we can drop the check of @ep->hcpriv. Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: relax TT periodic bandwidth allocation

2022-08-19T08:39:05Z

Currently uses the worst case byte budgets on FS/LS bus bandwidth, for example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 5 uframes(188 * 5) while the actual FS bus budget should be just 192 bytes. It cause that many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured. To improve it, changes to use "approximate" best case budget for FS/LS bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Signed-off-by: Chunfeng Yun Cc: stable Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping

2022-08-06T17:56:45Z

Pull dma-mapping updates from Christoph Hellwig: - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy, Christoph Hellwig) - restructure the PCIe peer to peer mapping support (Logan Gunthorpe) - allow the IOMMU code to communicate an optional DMA mapping length and use that in scsi and libata (John Garry) - split the global swiotlb lock (Tianyu Lan) - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang, Lukas Bulwahn, Robin Murphy) * tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits) swiotlb: fix passing local variable to debugfs_create_ulong() dma-mapping: reformat comment to suppress htmldoc warning PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() RDMA/rw: drop pci_p2pdma_[un]map_sg() RDMA/core: introduce ib_dma_pci_p2p_dma_supported() nvme-pci: convert to using dma_map_sgtable() nvme-pci: check DMA ops when indicating support for PCI P2PDMA iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg iommu: Explicitly skip bus address marked segments in __iommu_map_sg() dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support dma-direct: support PCI P2PDMA pages in dma-direct map_sg dma-mapping: allow EREMOTEIO return code for P2PDMA transfers PCI/P2PDMA: Introduce helpers for dma_map_sg implementations PCI/P2PDMA: Attempt to set map_type if it has not been set lib/scatterlist: add flag for indicating P2PDMA segments in an SGL swiotlb: clean up some coding style and minor issues dma-mapping: update comment after dmabounce removal scsi: sd: Add a comment about limiting max_sectors to shost optimal limit ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit ...

Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2022-08-05T16:41:12Z

Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...

usb: renesas-xhci: Do not print any log while fw verif success

2022-07-27T12:37:48Z

When drivers are working properly, they should be quiet. Signed-off-by: Chen Xingdi Link: https://lore.kernel.org/r/20220727031146.19345-1-chenxingdi@huawei.com Signed-off-by: Greg Kroah-Hartman

USB: xhci: Fix comment typo

2022-07-27T12:36:39Z

The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang Link: https://lore.kernel.org/r/20220716041755.34016-1-wangborong@cdjrlc.com Signed-off-by: Greg Kroah-Hartman

usb/host: fix repeated words in comments

2022-07-27T12:33:33Z

Delete the redundant word 'the'. Delete the redundant word 'to'. Signed-off-by: Jilin Yuan Link: https://lore.kernel.org/r/20220716133624.41994-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman