linux/drivers/usb/host, branch v6.13

usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property

2024-12-23T17:50:05Z

The source of quirk XHCI_SKIP_PHY_INIT comes from xhci_plat_priv.quirks or software node property. This will set skip_phy_initialization if software node also has XHCI_SKIP_PHY_INIT property. Fixes: a6cd2b3fa894 ("usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk") Cc: stable Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20241209111423.4085548-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: fix ring expansion regression in 6.13-rc1

2024-12-17T10:59:09Z

The source and destination rings were incorrectly assigned during the ring linking process. The "source" ring, which contains the new segments, was not spliced into the "destination" ring, leading to incorrect ring expansion. Fixes: fe688e500613 ("usb: xhci: refactor xhci_link_rings() to use source and destination rings") Reported-by: Jeff Chua Closes: https://lore.kernel.org/lkml/CAAJw_ZtppNqC9XA=-WVQDr+vaAS=di7jo15CzSqONeX48H75MA@mail.gmail.com/ Signed-off-by: Niklas Neronin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20241217102122.2316814-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic

2024-12-17T10:59:09Z

xHC hosts from several vendors have the same issue where endpoints start so slowly that a later queued 'Stop Endpoint' command may complete before endpoint is up and running. The 'Stop Endpoint' command fails with context state error as the endpoint still appears as stopped. See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for details CC: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20241217102122.2316814-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: max3421-hcd: Correctly abort a USB request.

2024-12-04T15:25:30Z

If the current USB request was aborted, the spi thread would not respond to any further requests. This is because the "curr_urb" pointer would not become NULL, so no further requests would be taken off the queue. The solution here is to set the "urb_done" flag, as this will cause the correct handling of the URB. Also clear interrupts that should only be expected if an URB is in progress. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable Signed-off-by: Mark Tomlinson Link: https://lore.kernel.org/r/20241124221430.1106080-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman

usb: ehci-hcd: fix call balance of clocks handling routines

2024-12-04T15:25:13Z

If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe, they should not be disabled in any path. Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.") Cc: stable@vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk Signed-off-by: Vitalii Mordan Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20241121114700.2100520-1-mordan@ispras.ru Signed-off-by: Greg Kroah-Hartman

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

usb: ehci-spear: fix call balance of sehci clk handling routines

2024-11-16T08:04:06Z

If the clock sehci->clk was not enabled in spear_ehci_hcd_drv_probe, it should not be disabled in any path. Conversely, if it was enabled in spear_ehci_hcd_drv_probe, it must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 7675d6ba436f ("USB: EHCI: make ehci-spear a separate driver") Cc: stable@vger.kernel.org Signed-off-by: Vitalii Mordan Acked-by: Alan Stern Link: https://lore.kernel.org/r/20241114230310.432213-1-mordan@ispras.ru Signed-off-by: Greg Kroah-Hartman

drivers/usb/host: refactor min/max with min_t/max_t

2024-11-13T14:09:50Z

Ensure type safety by using min_t/max_t instead of casted min/max. Signed-off-by: Sabyrzhan Tasbolatov Link: https://lore.kernel.org/r/20241112155817.3512577-4-snovitoll@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Synchronise PCI IDs via common data base

2024-11-13T06:16:31Z

There are a few places in the kernel where PCI IDs for different Cadence USB controllers are being used. Besides different naming, they duplicate each other. Make this all in order by providing common definitions via PCI IDs database and use in all users. While doing that, rename definitions as Roger suggested. Suggested-by: Roger Quadros Suggested-by: Greg Kroah-Hartman Signed-off-by: Andy Shevchenko Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20241112160125.2340972-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: Avoid queuing redundant Stop Endpoint commands

2024-11-06T12:26:16Z

Stop Endpoint command on an already stopped endpoint fails and may be misinterpreted as a known hardware bug by the completion handler. This results in an unnecessary delay with repeated retries of the command. Avoid queuing this command when endpoint state flags indicate that it's stopped or halted and the command will fail. If commands are pending on the endpoint, their completion handlers will process cancelled TDs so it's done. In case of waiting for external operations like clearing TT buffer, the endpoint is stopped and cancelled TDs can be processed now. This eliminates practically all unnecessary retries because an endpoint with pending URBs is maintained in Running state by the driver, unless aforementioned commands or other operations are pending on it. This is guaranteed by xhci_ring_ep_doorbell() and by the fact that it is called every time any of those operations completes. The only known exceptions are hardware bugs (the endpoint never starts at all) and Stream Protocol errors not associated with any TRB, which cause an endpoint reset not followed by restart. Sounds like a bug. Generally, these retries are only expected to happen when the endpoint fails to start for unknown/no reason, which is a worse problem itself, and fixing the bug eliminates the retries too. All cases were tested and found to work as expected. SET_DEQ_PENDING was produced by patching uvcvideo to unlink URBs in 100us intervals, which then runs into this case very often. EP_HALTED was produced by restarting 'cat /dev/ttyUSB0' on a serial dongle with broken cable. EP_CLEARING_TT by the same, with the dongle on an external hub. Fixes: fd9d55d190c0 ("xhci: retry Stop Endpoint on buggy NEC controllers") CC: stable@vger.kernel.org Signed-off-by: Michal Pecio Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20241106101459.775897-34-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman