linux/drivers/usb/host, branch v6.7

Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"

2023-12-05T19:32:22Z

This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac. Enabling runtime pm as default for all AMD xHC 1.1 controllers caused regression. An initial attempt to fix those was done in commit a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states") but new issues are still seen. Revert this to get those AMD xHC 1.1 systems working This patch went to stable an needs to be reverted from there as well. Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1") Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de Cc: Mario Limonciello Cc: Basavaraj Natikar Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Reviewed-by: Mario Limonciello Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: xhci-plat: fix legacy PHY double init

2023-11-21T14:37:48Z

Commits 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") and 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support for looking up legacy PHYs from the sysdev devicetree node and initialising them. This broke drivers such as dwc3 which manages PHYs themself as the PHYs would now be initialised twice, something which specifically can lead to resources being left enabled during suspend (e.g. with the usb_phy_generic PHY driver). As the dwc3 driver uses driver-name matching for the xhci platform device, fix this by only looking up and initialising PHYs for devices that have been matched using OF. Note that checking that the platform device has a devicetree node would currently be sufficient, but that could lead to subtle breakages in case anyone ever tries to reuse an ancestor's node. Fixes: 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") Cc: stable@vger.kernel.org # 4.1 Cc: Maxime Ripard Cc: Stanley Chang Signed-off-by: Johan Hovold Tested-by: Stefan Eichenberger Tested-by: Stanley Chang Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix in-ep's start-split check failure

2023-11-21T14:31:25Z

It's wrong to use the data length in a CS (in uframe x) to check whether there is a SS (in uframe x-2), because for a isoc-in ep, it may need some CS to receive data; Save the count of SS in a uframe for isoc/intr in-eps to fix the issue. Fixes: 5c954e030f55 ("usb: xhci-mtk: improve split scheduling by separate IN/OUT budget") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20231118033011.22033-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-11-04T02:00:42Z

Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...

Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2023-10-31T05:09:55Z

Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...

usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present

2023-10-21T10:38:54Z

There is a 120ms delay implemented for allowing the XHCI host controller to detect a U3 wakeup pulse. The intention is to wait for the device to retry the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status by the time it is checked. As per the USB3 specification: tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts") This would allow the XHCI resume sequence to determine if the root hub needs to be also resumed. However, in case there is no device connected, or if there is only a HSUSB device connected, this delay would still affect the overall resume timing. Since this delay is solely for detecting U3 wake events (USB3 specific) then ignore this delay for the disconnected case and the HSUSB connected only case. [skip helper function, rename usb3_connected variable -Mathias ] Signed-off-by: Wesley Cheng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-plat: fix possible kernel oops while resuming

2023-10-21T10:38:54Z

If this driver enables the xHC clocks while resuming from sleep, it calls clk_prepare_enable() without checking for errors and blithely goes on to read/write the xHC's registers -- which, with the xHC not being clocked, at least on ARM32 usually causes an imprecise external abort exceptions which cause kernel oops. Currently, the chips for which the driver does the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based on ARM32 CPUs, as it seems... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Fixes: 8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks") Signed-off-by: Sergey Shtylyov Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: Implement xhci_handshake_check_state() helper

2023-10-21T10:38:54Z

In some situations where xhci removal happens parallel to xhci_handshake, we encounter a scenario where the xhci_handshake can't succeed, and it polls until timeout. If xhci_handshake runs until timeout it can on some platforms result in a long wait which might lead to a watchdog timeout. Add a helper that checks xhci status during the handshake, and exits if set state is entered. Use this helper in places where xhci_handshake is called unlocked and has a long timeout. For example xhci command timeout and xhci reset. [commit message and code comment rewording -Mathias] Signed-off-by: Udipto Goswami Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20231019102924.2797346-18-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: split free interrupter into separate remove and free parts

2023-10-21T10:38:54Z

The current function that both removes and frees an interrupter isn't optimal when using several interrupters. The array of interrupters need to be protected with a lock while removing interrupters, but the default xhci spin lock can't be used while freeing the interrupters event ring segment table as dma_free_coherent() should be called with IRQs enabled. There is no need to free the interrupter under the lock, so split this code into separate unlocked free part, and a lock protected remove part. Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20231019102924.2797346-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Enable RPM on controllers that support low-power states

2023-10-21T10:38:54Z

Use the low-power states of the underlying platform to enable runtime PM. If the platform doesn't support runtime D3, then enabling default RPM will result in the controller malfunctioning, as in the case of hotplug devices not being detected because of a failed interrupt generation. Cc: Mario Limonciello Signed-off-by: Basavaraj Natikar Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20231019102924.2797346-16-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman