linux/drivers/usb/misc, branch v6.0

usb: misc: onboard_usb_hub: Drop reset delay in onboard_hub_power_off()

2022-08-18T19:10:59Z

onboard_hub_power_off() currently has a delay after asserting the reset of the hub. There is already a delay in onboard_hub_power_on() before de-asserting the reset, which ensures that the reset is asserted for the required time, so the delay in _power_off() is not needed. Skip the reset GPIO check before calling gpiod_set_value_cansleep(), the function returns early when the GPIO descriptor is NULL. Reviewed-By: Alexander Stein Reviewed-by: Douglas Anderson Signed-off-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-08-08T18:31:40Z

Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...

usb: misc: onboard_usb_hub: Remove duplicated power_on delay

2022-07-28T07:21:15Z

onboard_hub_power_on() already ensures the reset pulse width delay, so there is no need to wait right after requesting GPIO as well. Fixes: 40758e493f4d ("usb: misc: onboard_usb_hub: Add reset-gpio support") Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20220728064937.917935-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_hub: Add TI USB8041 hub support

2022-07-27T14:26:20Z

This is a 4-port 3.0 USB hub. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20220727141117.909361-2-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_hub: Add reset-gpio support

2022-07-27T14:26:20Z

Despite default reset upon probe, release reset line after powering up the hub and assert reset again before powering down. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20220727141117.909361-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman

USB: usbsevseg: convert sysfs snprintf to sysfs_emit

2022-07-27T12:48:14Z

Fix the following coccincheck warning: drivers/usb/misc/usbsevseg.c:170:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Xuezhi Zhang Link: https://lore.kernel.org/r/20220727124415.8340-1-zhangxuezhi3@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub

2022-07-27T12:39:51Z

Add support for Microchip USB2514B USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). Some STM32MP1 boards have this hub on-board, with a supply that needs to be enabled for proper operation. Acked-by: Matthias Kaehlcke Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20220726080708.162547-3-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb/misc: fix repeated words in comments

2022-07-27T12:33:57Z

Delete the redundant word 'with'. Signed-off-by: Jilin Yuan Link: https://lore.kernel.org/r/20220716134105.44710-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman

usb: ldusb: replace ternary operator with max_t()

2022-07-14T14:09:56Z

Fix the following coccicheck warning: drivers/usb/misc/ldusb.c:719: WARNING opportunity for max(). drivers/usb/misc/ldusb.c:721: WARNING opportunity for max(). max_t() macro is defined in include/linux/minmax.h. It avoids multiple evaluations of the arguments when non-constant and performs strict type-checking. Signed-off-by: Jiangshan Yi Link: https://lore.kernel.org/r/20220713070205.3047256-1-13667453960@163.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_hub: Fix 'missing prototype' warning

2022-07-14T14:09:32Z

When building with 'W=1' the compiler complains about missing prototypes for onboard_hub_create/destroy_pdevs(). Include the header with the prototypes to fix this. Reported-by: kernel test robot Reviewed-by: Douglas Anderson Signed-off-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20220711092431.1.I4016c759fd7fe2b32dd482994a20661f36e2cae3@changeid Signed-off-by: Greg Kroah-Hartman