linux/drivers/usb/misc, branch v6.15

usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs

2025-05-01T15:39:59Z

The Cypress HX3 USB3.0 hubs use different PID values depending on the product variant. The comment in compatibles table is misleading, as the currently used PIDs (0x6504 and 0x6506 for USB 3.0 and USB 2.0, respectively) are defaults for the CYUSB331x, while CYUSB330x and CYUSB332x variants use different values. Based on the datasheet [1], update the compatible usb devices table to handle different types of the hub. The change also includes vendor mode PIDs, which are used by the hub in I2C Master boot mode, if connected EEPROM contains invalid signature or is blank. This allows to correctly boot the hub even if the EEPROM will have broken content. Number of vcc supplies and timing requirements are the same for all HX variants, so the platform driver's match table does not have to be extended. [1] https://www.infineon.com/dgdl/Infineon-HX3_USB_3_0_Hub_Consumer_Industrial-DataSheet-v22_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ecb53f644b8 Table 9. PID Values Fixes: b43cd82a1a40 ("usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family") Cc: stable Signed-off-by: Lukasz Czechowski Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-1-4a76a474a010@thaumatec.com Signed-off-by: Greg Kroah-Hartman

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12Z

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar

usb: misc: onboard_dev: add vdda support for Microchip USB2514

2025-02-19T14:14:13Z

This hub is powered by digital and analog 3V3 power rails, so provide the possibility to use different regulators for digital (vdd) and analog (vdda) power rails. Signed-off-by: Catalin Popescu Link: https://lore.kernel.org/r/20250213094338.1611389-3-catalin.popescu@leica-geosystems.com Signed-off-by: Greg Kroah-Hartman

usb: usb251xb: silence EPROBE_DEFER error on boot

2025-02-03T15:29:21Z

Use dev_err_probe to silence EPROBE_DEFER error on boot: [ 0.757677] usb251xb 1-002c: failed to get ofdata: -517 Signed-off-by: Dominique Martinet Acked-by: Richard Leitner Link: https://lore.kernel.org/r/20250203-defer_usb1-v2-1-eba405ebee2c@atmark-techno.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support

2024-12-04T15:27:04Z

USB5744 SMBus initialization is done once in probe() and doing it in resume is not supported so avoid going into suspend and reset the HUB. There is a sysfs property 'always_powered_in_suspend' to implement this feature but since default state should be set to a working configuration so override this property value. It fixes the suspend/resume testcase on Kria KR260 Robotics Starter Kit. Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support") Cc: stable@vger.kernel.org Signed-off-by: Radhey Shyam Pandey Link: https://lore.kernel.org/r/1733165302-1694891-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

drivers/usb/misc: refactor min with min_t

2024-11-13T14:09:51Z

Ensure type safety by using min_t() instead of min(). Also add the explicit `unsigned int` as scripts/checkpatch.pl warns about: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Sabyrzhan Tasbolatov Link: https://lore.kernel.org/r/20241112155817.3512577-5-snovitoll@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: misc: ljca: set small runtime autosuspend delay

2024-11-12T11:17:26Z

On some Lenovo platforms, the patch works around problems with ov2740 sensor initialization, which manifest themself like below: [ 4.540476] ov2740 i2c-INT3474:01: error -EIO: failed to find sensor [ 4.542066] ov2740 i2c-INT3474:01: probe with driver ov2740 failed with error -5 or [ 7.742633] ov2740 i2c-INT3474:01: chip id mismatch: 2740 != 0 [ 7.742638] ov2740 i2c-INT3474:01: error -ENXIO: failed to find sensor and also by random failures of video stream start. Issue can be reproduced by this script: n=0 k=0 while [ $n -lt 50 ] ; do sudo modprobe -r ov2740 sleep `expr $RANDOM % 5` sudo modprobe ov2740 if media-ctl -p | grep -q ov2740 ; then let k++ fi let n++ done echo Success rate $k/$n Without the patch, success rate is approximately 15 or 50 tries. With the patch it does not fail. This problem is some hardware or firmware malfunction, that can not be easy debug and fix. While setting small autosuspend delay is not perfect workaround as user can configure it to any value, it will prevent the failures by default. Additionally setting small autosuspend delay should have positive effect on power consumption as for most ljca workloads device is used for just a few milliseconds flowed by long periods of at least 100ms of inactivity (usually more). Fixes: acd6199f195d ("usb: Add support for Intel LJCA device") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Tested-by: Hans de Goede # ThinkPad X1 Yoga Gen 8, ov2740 Acked-by: Sakari Ailus Signed-off-by: Stanislaw Gruszka Link: https://lore.kernel.org/r/20241112075514.680712-2-stanislaw.gruszka@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: misc: ljca: move usb_autopm_put_interface() after wait for response

2024-11-12T11:17:20Z

Do not mark interface as ready to suspend when we are still waiting for response messages from the device. Fixes: acd6199f195d ("usb: Add support for Intel LJCA device") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Tested-by: Hans de Goede # ThinkPad X1 Yoga Gen 8, ov2740 Acked-by: Sakari Ailus Signed-off-by: Stanislaw Gruszka Link: https://lore.kernel.org/r/20241112075514.680712-1-stanislaw.gruszka@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge 6.12-rc3 into usb-next

2024-10-14T06:03:44Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman