linux/drivers/usb/phy, branch v3.9

usb: Fix compile error by selecting USB_OTG_UTILS

2013-03-27T15:49:20Z

The current lpc32xx_defconfig breaks like this, caused by recent phy restructuring: LD init/built-in.o drivers/built-in.o: In function `usb_hcd_nxp_probe': drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client' drivers/built-in.o: In function `lpc32xx_udc_probe': drivers/usb/gadget/lpc32xx_udc.c:3104: undefined reference to `isp1301_get_client' distcc[27867] ERROR: compile (null) on localhost failed make: *** [vmlinux] Error 1 Caused by 1c2088812f095df77f4b3224b65db79d7111a300 (usb: Makefile: fix drivers/usb/phy/ Makefile entry) This patch fixes this by selecting USB_OTG_UTILS in Kconfig which causes the phy driver to be built again. Signed-off-by: Roland Stigge Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: phy: omap-control-usb: Convert to devm_ioremap_resource()

2013-03-04T11:08:53Z

Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Reviewed-by: Thierry Reding Signed-off-by: Sachin Kamat Cc: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi

usb: phy: omap-usb3: Convert to devm_ioremap_resource()

2013-03-04T11:08:48Z

usb: phy: samsung: Convert to devm_ioremap_resource()

2013-03-04T11:08:39Z

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-02-21T23:27:22Z

Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...

Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2013-02-21T20:20:00Z

Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...

usb: phy: fix Kconfig warning

2013-01-29T15:33:07Z

Recent commits introduced the following Kconfig warning: warning: (USB_MUSB_HDRC && OMAP_USB3) selects \ OMAP_CONTROL_USB which has unmet direct \ dependencies (USB_SUPPORT && ARCH_OMAP2PLUS) This patch just fixes it, by removing the unnecessary OMAP dependency. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: host: tegra: make use of PHY pointer of HCD

2013-01-28T18:42:11Z

As pointer to PHY structure can be stored in struct usb_hcd making use of it, to call Tegra PHY APIs. Call to usb_phy_shutdown() is moved up in tegra_ehci_remove(), so that to avoid dereferencing of hcd after its freed up. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern Acked-by: Felipe Balbi Acked-by: Greg Kroah-Hartman Signed-off-by: Stephen Warren

usb: add APIs to access host registers from Tegra PHY

2013-01-28T18:20:05Z

As Tegra PHY driver needs to access one of the host registers, added few APIs. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern [swarren: moved assignment of phy->is_ulpi_phy to previous patch.] Signed-off-by: Stephen Warren

USB: PHY: tegra: Get rid of instance number to differentiate PHY type

2013-01-28T18:20:05Z

Tegra20 USB has 3 PHY instances: Instance 1 and 3 are UTMI. Instance 2 is ULPI. As instance number was used to differentiate ULPI from UTMI, used DT param to get this info and processed accordingly. Signed-off-by: Venu Byravarasu Acked-by: Felipe Balbi [swarren: moved assignment of phy->is_ulpi_phy into this patch out of next patch.] Signed-off-by: Stephen Warren