linux/drivers/usb/phy, branch v4.2

usb: phy: mxs: suspend to RAM causes NULL pointer dereference

2015-07-06T17:34:08Z

Triggering suspend to RAM via sysfs on a i.MX28 causes a NULL pointer dereference. This patch avoids the oops in mxs_phy_get_vbus_status() by aborting since there is no syscon available. Signed-off-by: Stefan Wahren Fixes: efdbd3a5d6e ("usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connection") CC: # 4.0 Acked-by: Peter Chen Signed-off-by: Felipe Balbi

Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-06-26T22:59:26Z

Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...

Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2015-06-26T21:51:15Z

Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...

extcon: Redefine the unique id of supported external connectors without 'enum extcon' type

2015-06-13T00:01:42Z

This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman

Merge 4.1-rc7 into usb-next

2015-06-08T17:57:51Z

This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2015-06-02T01:47:03Z

Felipe writes: usb: patches for v4.2 merge window - dwc2 adds hibernation support - preparation for sunxi glue to musb driver - new ULPI bus - new ULPI PHY driver for TUSB1210 - musb patches to support multiple DMA engines on same binary - support for R-Car E2 on renesas_usbhs Signed-off-by: Felipe Balbi

usb: phy: Add interface to get phy give of device_node.

2015-05-26T15:42:28Z

Split the "get phy from device_node" functionality out of "get phy by phandle" so it can be used directly. This is useful when a battery-charger is intimately associated with a particular phy but handled by a separate driver. The charger can find the device_node based on sibling relationships without the need for a redundant declaration in the devicetree description. As a peripheral that gets a phy will often want to register a notifier block, and de-register it later, that functionality is included so the de-registration is automatic. Acked-by: Pavel Machek Signed-off-by: NeilBrown Signed-off-by: Felipe Balbi

usb: phy: tahvo: Pass the IRQF_ONESHOT flag

2015-05-26T14:44:51Z

Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi

usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flag

2015-05-26T14:44:46Z

extcon: Use the unique id for external connector instead of string

2015-05-22T09:58:44Z

This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann Cc: Felipe Balbi Signed-off-by: Chanwoo Choi Acked-by: Roger Quadros Acked-by: Charles Keepax Acked-by: Ramakrishna Pallala Reviewed-by: Krzysztof Kozlowski [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter