linux/drivers/usb/phy, branch v5.1

Merge tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-02-15T08:08:57Z

Felipe writes: USB: changes for v5.1 merge window Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few changes which improve request cancellation and some improvements to how we print to the trace buffer. Renesas_usb3 got support for r8a774c0 device. Dwc2 got scatter-gather support. Apart from these, the usual set of minor fixes and all sorts of small details. * tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits) usb: phy: twl6030-usb: fix possible use-after-free on remove usb: misc: usbtest: add super-speed isoc support usb: dwc3: Reset num_trbs after skipping usb: dwc3: gadget: don't enable interrupt when disabling endpoint fotg210-udc: pass struct device to DMA API functions fotg210-udc: remove a bogus dma_sync_single_for_device call usb: gadget: Change Andrzej Pietrasiewicz's e-mail address usb: f_fs: Avoid crash due to out-of-scope stack ptr access usb: dwc3: haps: Workaround matching VID PID usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss() usb: gadget: function: sync f_uac1 ac header baInterfaceNr usb: dwc2: gadget: Add scatter-gather mode usb: gadget: fix various indentation issues usb: dwc2: Fix EP TxFIFO number setting udc: net2280: Fix net2280_disable USB: gadget: Improve kerneldoc for usb_ep_dequeue() usb: dwc3: debug: purge usage of strcat usb: dwc3: trace: pass trace buffer size to decoding functions usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING ...

usb: phy: twl6030-usb: fix possible use-after-free on remove

2019-02-13T11:05:35Z

In remove(), use cancel_delayed_work_sync() to cancel the delayed work. Otherwise there's a chance that this work will continue to run until after the device has been removed. This issue was detected with the help of Coccinelle. Cc: Tony Lindgren Cc: Bin Liu Fixes: b6a619a883c3 ("usb: phy: Check initial state for twl6030") Signed-off-by: Sven Van Asbroeck Signed-off-by: Felipe Balbi

Merge 5.0-rc6 into usb-next

2019-02-11T08:28:39Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: phy: am335x: fix race condition in _probe

2019-01-28T13:31:43Z

power off the phy should be done before populate the phy. Otherwise, am335x_init() could be called by the phy owner to power on the phy first, then am335x_phy_probe() turns off the phy again without the caller knowing it. Fixes: 2fc711d76352 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi

usb: phy: fix link errors

2019-01-28T13:30:45Z

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs. aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors. Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin. Signed-off-by: Anders Roxell Signed-off-by: Felipe Balbi

USB: add missing SPDX lines to Kconfig and Makefiles

2019-01-22T08:08:17Z

There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman

usb: phy: ab8500: silence some uninitialized variable warnings

2018-10-18T17:44:39Z

Smatch complains that "reg" can be uninitialized if the abx500_get_register_interruptible() call fails. It's an interruptable function, so we should check if the user presses CTRL-C. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

usb: phy: mxs: fix spelling mistake "stardard" -> "standard"

2018-09-20T11:16:14Z

Trivial fix to spelling mistake in dev_dbg message Signed-off-by: Colin Ian King Acked-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb/phy: fix PPC64 build errors in phy-fsl-usb.c

2018-07-17T07:12:51Z

Fix build errors when built for PPC64: These variables are only used on PPC32 so they don't need to be initialized for PPC64. ../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start': ../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_le; ../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_le; and the sysfs "show" function return type should be ssize_t, not int: ../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types] static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); Signed-off-by: Randy Dunlap Cc: Felipe Balbi Cc: linux-usb@vger.kernel.org Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Felipe Balbi

phy: tegra: select USB_COMMON

2018-05-31T10:50:40Z

A built-in PHY driver cannot link against modular USB core code: drivers/usb/phy/phy-tegra-usb.o: In function `tegra_usb_phy_probe': phy-tegra-usb.c:(.text+0x6bc): undefined reference to `usb_get_dr_mode' This uses a 'select' statement in Kconfig like we have for other such PHY drivers. Signed-off-by: Arnd Bergmann Reviewed-by: Dmitry Osipenko Signed-off-by: Greg Kroah-Hartman