linux/drivers/usb/phy, branch v5.14

usb: phy: Fix page fault from usb_phy_uevent

2021-07-21T07:48:36Z

When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb092d7-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb092d7 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen Signed-off-by: Artur Petrosyan Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Correct definition of B_SESS_VLD_WAKEUP_EN bit

2021-06-15T13:36:23Z

The B_SESS_VLD_WAKEUP_EN bit 6 was added by a mistake in a previous commit. This bit corresponds to B_SESS_END_WAKEUP_EN, which we don't use. The B_VBUS_VLD_WAKEUP_EN doesn't exist at all and B_SESS_VLD_WAKEUP_EN needs to be in place of it. We don't utilize B-sensors in the driver, so it never was a problem, nevertheless let's correct the definition of the bits. Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210613145936.9902-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Wait for VBUS wakeup status deassertion on suspend

2021-06-15T13:36:23Z

Some devices need an extra delay after losing VBUS, otherwise VBUS may be detected as active at suspend time, preventing the PHY's suspension by the VBUS detection sensor. This problem was found on Asus Transformer TF700T (Tegra30) tablet device, where the USB PHY wakes up immediately from suspend because VBUS sensor continues to detect VBUS as active after disconnection. We need to poll the PHY's VBUS wakeup status until it's deasserted before suspending PHY in order to fix this minor trouble. Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode") Reported-by: Maxim Schwalm # Asus TF700T Tested-by: Maxim Schwalm # Asus TF700T Reviewed-by: Peter Chen Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210613145936.9902-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: introduce usb_phy device type with its own uevent handler

2021-06-03T11:55:00Z

The USB charger type and status was already propagated to userspace through kobject_uevent_env during charger notify work. Nevertheless the uevent could be lost e.g. because it could be fired at an early kernel boot stage, way before udev daemon or any other user-space app was able to catch it. Registering uevent hook for introduced usb_phy_dev_type will allow to query sysfs 'uevent' file to restore that information at any time. Reviewed-by: Peter Chen Signed-off-by: Grzegorz Jaszczyk Link: https://lore.kernel.org/r/20210531122222.453628-1-grzegorz.jaszczyk@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: phy: isp1301: Deduplicate of_find_i2c_device_by_node()

2021-05-24T13:27:17Z

The driver is using open-coded variant of of_find_i2c_device_by_node(). Replace it by the actual call to the above mentioned API. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210521145243.87911-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: phy: Use fallthrough pseudo-keyword

2021-05-10T09:16:11Z

Replace /* FALLTHROUGH */ comment with pseudo-keyword macro fallthrough[1] [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Acked-by: Felipe Balbi Signed-off-by: Wei Ming Chen Link: https://lore.kernel.org/r/20210505141936.4343-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: phy-mxs-usb: Use of_device_get_match_data()

2021-01-18T17:35:46Z

The retrieval of driver data via of_device_get_match_data() can make the code simpler. Use of_device_get_match_data() to simplify the code. Acked-by: Peter Chen Acked-by: Felipe Balbi Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20210118152615.1644861-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Support waking up from a low power mode

2021-01-13T10:26:34Z

Support programming of waking up from a low power mode by implementing the generic set_wakeup() callback of the USB PHY API. Tested-by: Matt Merhar Tested-by: Nicolas Chauvet Tested-by: Peter Geis Tested-by: Ion Agorria Acked-by: Thierry Reding Acked-by: Peter Chen Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201218120246.7759-3-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Add delay after power up

2021-01-13T10:26:34Z

The PHY hardware needs the delay of 2ms after power up, otherwise initial interrupt may be lost if USB controller is accessed before PHY is settled down. Previously this issue was masked by implicit delays, but now it pops up after squashing the older ehci-tegra driver into the ChipIdea driver. Tested-by: Matt Merhar Tested-by: Nicolas Chauvet Tested-by: Peter Geis Tested-by: Ion Agorria Acked-by: Thierry Reding Acked-by: Peter Chen Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201218120246.7759-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-12-15T22:10:09Z

Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...