linux/drivers/usb/phy, branch v5.17

usb: Remove redundant 'flush_workqueue()' calls

2021-11-17T13:36:57Z

'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Acked-by: Shuah Khan Acked-by: Peter Chen # for chipidea part Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

USB: phy: tahvo:remove unnecessary debug log

2021-10-05T10:51:07Z

Remove the debug info which should be instead with ftrace Acked-by: Felipe Balbi Signed-off-by: Zhiwei Yang Link: https://lore.kernel.org/r/20210924083852.6029-1-yangzhiwei@uniontech.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Support OTG mode programming

2021-10-05T10:47:49Z

Support programming USB PHY into OTG mode. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20210912181718.1328-5-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tahvo: add IRQ check

2021-08-16T16:57:19Z

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_threaded_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling request_threaded_irq() with the invalid IRQ #s. Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver") Acked-by: Felipe Balbi Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru Signed-off-by: Greg Kroah-Hartman

usb: phy: twl6030: add IRQ checks

2021-08-13T11:05:50Z

The driver neglects to check the result of platform_get_irq()'s calls and blithely passes the negative error codes to request_threaded_irq() (which takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding an original error code. Stop calling request_threaded_irq() with the invalid IRQ #s. Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430") Acked-by: Felipe Balbi Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru Signed-off-by: Greg Kroah-Hartman

usb: phy: fsl-usb: add IRQ check

2021-08-13T11:05:50Z

The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling request_irq() with the invalid IRQ #s. Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver") Acked-by: Felipe Balbi Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru Signed-off-by: Greg Kroah-Hartman

Merge v5.14-rc3 into usb-next

2021-07-26T09:16:46Z

We need the fixes in here, and this resolves a merge issue with drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman

usb: isp1301-omap: Fix the GPIO include

2021-07-21T08:06:30Z

The file is using only GPIO descriptors, so only include instead of the legacy include. This is a non-urgent fix. Fixes: f3ef38160e3d ("usb: isp1301-omap: Convert to use GPIO descriptors") Cc: Tony Lindgren Cc: Felipe Balbi Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210720200336.223398-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: phy: Fix page fault from usb_phy_uevent

2021-07-21T07:48:36Z

When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb092d7-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb092d7 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen Signed-off-by: Artur Petrosyan Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Correct definition of B_SESS_VLD_WAKEUP_EN bit

2021-06-15T13:36:23Z

The B_SESS_VLD_WAKEUP_EN bit 6 was added by a mistake in a previous commit. This bit corresponds to B_SESS_END_WAKEUP_EN, which we don't use. The B_VBUS_VLD_WAKEUP_EN doesn't exist at all and B_SESS_VLD_WAKEUP_EN needs to be in place of it. We don't utilize B-sensors in the driver, so it never was a problem, nevertheless let's correct the definition of the bits. Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210613145936.9902-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman