linux/drivers/usb/serial, branch v3.13

usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option

2013-12-09T21:14:12Z

ZTE AC2726 EVDO modem drops ppp connection every minute when driven by zte_ev but works fine when driven by option. Move the support for AC2726 back to option driver. Signed-off-by: Dmitry Kunilov Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: pl2303: fixed handling of CS5 setting

2013-12-03T05:52:57Z

This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a value of 0 and the CSIZE setting has been skipped altogether by the enclosing if. Tested on 3.11.6 and the scope shows the correct output after the fix has been applied. Tagged to be added to stable, because it fixes a user visible driver bug and is simple enough to backport easily. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: fixed handling of unsupported CSIZE setting

2013-12-03T05:52:57Z

FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would only report this limitation for CS6 to dmesg and fail to reflect this fact to tcgetattr. This patch reverts the unsupported CSIZE setting and reports the fact with less severance to dmesg for both CS5 and CS6. To test the patch it's sufficient to call stty -F /dev/ttyUSB0 cs5 which will succeed without the patch and report an error with the patch applied. As an additional fix this patch ensures that the control request will always include a data bit size. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: mos7840: correct handling of CS5 setting

2013-12-03T05:52:57Z

This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: spcp8x5: correct handling of CS5 setting

2013-12-03T05:52:57Z

USB: option: support new huawei devices

2013-12-02T21:51:02Z

Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceProtocol value. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: option: blacklist interface 1 for Huawei E173s-6

2013-12-02T21:50:54Z

Interface 1 on this device isn't for option to bind to otherwise an oops on usb_wwan with log flooding will happen when accessing the port: tty_release: ttyUSB1: read/write wait queue active! It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add it there - it's likely used by the card reader. Signed-off-by: Gustavo Zacarias Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: fix write memory-allocation flag

2013-11-25T16:39:40Z

Fix regression introduced by commit 818f60365a29 ("USB: serial: add memory flags to usb_serial_generic_write_start"), which incorrectly used GFP_KERNEL in write(), which must not not sleep. Reported-by: Dave Jones Tested-by: Dave Jones Cc: Dave Jones Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: fix race in generic write

2013-11-25T16:39:40Z

Fix race in generic write implementation, which could lead to temporarily degraded throughput. The current generic write implementation introduced by commit 27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has always had this bug, although it's fairly hard to trigger and the consequences are not likely to be noticed. Specifically, a write() on one CPU while the completion handler is running on another could result in only one of the two write urbs being utilised to empty the remainder of the write fifo (unless there is a second write() that doesn't race during that time). Cc: stable # 2.6.35 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

tree-wide: use reinit_completion instead of INIT_COMPLETION

2013-11-15T00:32:21Z

Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang Acked-by: Linus Walleij (personally at LCE13) Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds