linux/drivers/usb/serial, branch v4.7

USB: mos7720: delete parport

2016-06-08T05:15:25Z

parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Cc: # 4.2+ Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-05-21T04:12:25Z

Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...

Merge tag 'usb-serial-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2016-05-14T09:25:35Z

Johan writes: USB-serial updates for v4.7-rc1 These updates fixes a number of issues where resources were not properly released on probe errors. Included is also a fix for hardware flow-control disable for cp210x. Support for Moxa UPort 11x0 is added to the ti_usb_3410_5052 driver, and included are also some general code clean ups. Signed-off-by: Johan Hovold

USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support

2016-05-11T09:31:44Z

Add support for : - UPort 1110 : 1 port RS-232 USB to Serial Hub. - UPort 1130 : 1 port RS-422/485 USB to Serial Hub. - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation. - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub. - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation. These devices are based on TI 3410 chip. Signed-off-by: Mathieu OTHACEHE [johan: fix rs485-only check ] Signed-off-by: Johan Hovold

USB: serial: fix minor-number allocation

2016-05-10T07:40:16Z

Due to a missing upper bound, invalid minor numbers could be assigned to ports. Such devices would later fail to register, but let's catch this early as intended and avoid having devices with only a subset of their ports registered (potentially the empty set). Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman

USB: serial: quatech2: fix use-after-free in probe error path

2016-05-10T07:40:09Z

The interface read URB is submitted in attach, but was only unlinked by the driver at disconnect. In case of a late probe error (e.g. due to failed minor allocation), disconnect is never called and we would end up with active URBs for an unbound interface. This in turn could lead to deallocated memory being dereferenced in the completion callback. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable # v3.5: 40d04738491d Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman

USB: serial: mxuport: fix use-after-free in probe error path

2016-05-10T07:40:03Z

The interface read and event URBs are submitted in attach, but were never explicitly unlinked by the driver. Instead the URBs would have been killed by usb-serial core on disconnect. In case of a late probe error (e.g. due to failed minor allocation), disconnect is never called and we could end up with active URBs for an unbound interface. This in turn could lead to deallocated memory being dereferenced in the completion callbacks. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable # v3.14 Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman

USB: serial: keyspan: fix debug and error messages

2016-05-10T07:39:57Z

The URB status is signed and should be printed using %d rather than %x. Also print endpoint addresses consistently using %x rather than %d, and merge a broken-up error message string. Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman

USB: serial: keyspan: fix URB unlink

2016-05-10T07:39:49Z

A driver must not rely on the URB status field to try to determine if an URB is active. Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman

USB: serial: keyspan: fix use-after-free in probe error path

2016-05-10T07:39:40Z

The interface instat and indat URBs were submitted in attach, but never unlinked in release before deallocating the corresponding transfer buffers. In the case of a late probe error (e.g. due to failed minor allocation), disconnect would not have been called before release, causing the buffers to be freed while the URBs are still in use. We'd also end up with active URBs for an unbound interface. Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect, release") Cc: stable # v2.6.31 Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman