linux/drivers/usb/serial, branch v5.4

USB: serial: whiteheat: fix line-speed endianness

2019-10-30T09:06:32Z

Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by: Johan Hovold Cc: stable Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: whiteheat: fix potential slab corruption

2019-10-30T09:06:31Z

Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20191029102354.2733-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: ti_usb_3410_5052: clean up serial data access

2019-10-16T08:29:23Z

Use the tdev pointer directly instead of going through the port data when accessing the serial data in close(). Signed-off-by: Johan Hovold

USB: serial: ti_usb_3410_5052: fix port-close races

2019-10-16T08:29:11Z

Fix races between closing a port and opening or closing another port on the same device which could lead to a failure to start or stop the shared interrupt URB. The latter could potentially cause a use-after-free or worse in the completion handler on driver unbind. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold

Merge tag 'usb-serial-5.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

2019-10-04T14:01:23Z

Johan writes: USB-serial fixes for 5.4-rc2 Here's a fix for a long-standing issue in the keyspan driver which could lead to NULL-pointer dereferences when a device had unexpected endpoint descriptors. Included are also some new device IDs. All but the last two commits have been in linux-next with no reported issues. Signed-off-by: Johan Hovold * tag 'usb-serial-5.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: keyspan: fix NULL-derefs on open() and write() USB: serial: option: add support for Cinterion CLS8 devices USB: serial: option: add Telit FN980 compositions USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20

USB: serial: fix runtime PM after driver unbind

2019-10-04T12:38:46Z

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20191001084908.2003-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: keyspan: fix NULL-derefs on open() and write()

2019-10-04T08:57:19Z

Fix NULL-pointer dereferences on open() and write() which can be triggered by a malicious USB device. The current URB allocation helper would fail to initialise the newly allocated URB if the device has unexpected endpoint descriptors, something which could lead NULL-pointer dereferences in a number of open() and write() paths when accessing the URB. For example: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:usb_clear_halt+0x11/0xc0 ... Call Trace: ? tty_port_open+0x4d/0xd0 keyspan_open+0x70/0x160 [keyspan] serial_port_activate+0x5b/0x80 [usbserial] tty_port_open+0x7b/0xd0 ? check_tty_count+0x43/0xa0 tty_open+0xf1/0x490 BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:keyspan_write+0x14e/0x1f3 [keyspan] ... Call Trace: serial_write+0x43/0xa0 [usbserial] n_tty_write+0x1af/0x4f0 ? do_wait_intr_irq+0x80/0x80 ? process_echoes+0x60/0x60 tty_write+0x13f/0x2f0 BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:keyspan_usa26_send_setup+0x298/0x305 [keyspan] ... Call Trace: keyspan_open+0x10f/0x160 [keyspan] serial_port_activate+0x5b/0x80 [usbserial] tty_port_open+0x7b/0xd0 ? check_tty_count+0x43/0xa0 tty_open+0xf1/0x490 Fixes: fdcba53e2d58 ("fix for bugzilla #7544 (keyspan USB-to-serial converter)") Cc: stable # 2.6.21 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: add support for Cinterion CLS8 devices

2019-10-04T08:57:18Z

Add support for the serial ports of Cinterion CLS8 devices. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable Signed-off-by: Johan Hovold

USB: serial: option: add Telit FN980 compositions

2019-10-02T10:00:01Z

This patch adds the following Telit FN980 compositions: 0x1050: tty, adb, rmnet, tty, tty, tty, tty 0x1051: tty, adb, mbim, tty, tty, tty, tty 0x1052: rndis, tty, adb, tty, tty, tty, tty 0x1053: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20

2019-10-02T09:47:10Z

Both devices added here have a FTDI chip inside. The device from Echelon is called 'Network Interface' it is actually a LON network gateway. ID 0403:8348 Future Technology Devices International, Ltd https://www.eltako.com/fileadmin/downloads/de/datenblatt/Datenblatt_PL-SW-PROF.pdf ID 0920:7500 Network Interface https://www.echelon.com/products/u20-usb-network-interface Signed-off-by: Beni Mahler Cc: stable Signed-off-by: Johan Hovold