linux/drivers/usb/typec, branch v5.0

usb: typec: tcpm: Correct the PPS out_volt calculation

2019-01-31T08:14:00Z

When Sink negotiates PPS, the voltage range of selected PPS APDO might not cover the previous voltage (out_volt). If the previous out_volt is lower than the new min_volt, the output voltage in RDO might be set to an invalid value. For instance, supposed that the previous voltage is 5V, and the new voltage range in the APDO is 7V-12V. Then the output voltage in the RDO should not be set to 5V which is lower than the possible min_volt 7V. Fix this by choosing the maximal value between the previous voltage and the new min_volt first. And ensure that this value will not exceed the new max_volt. The new out_volt will fall within the new voltage range while being the closest value compared to the previous out_volt. Signed-off-by: Kyle Tso Reviewed-by: Adam Thomson Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Fixes: c710d0bb76ff0 ("usb: typec: tcpm: Extend the matching rules on PPS APDO selection") Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-12-29T04:30:00Z

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...

Merge tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86

2018-12-25T19:04:17Z

Pull x86 platform driver updates from Andy Shevchenko: - The USB Power Delivery discrete components now can be enumerated by i2c-multi-instantiate driver via several resources under single ACPI device node (ACPI ID is INT3515). - Touchscreen support is added for the Mediacom Flexbook Edge 11. - Mellanox driver got fixed due to updates in their firmware. - The power management stub driver for AtomISP v2 is fixed in order to support Intel Baytrail SoCs where same quirk is needed for S0ix to work. - Special key handling has been fixed for Favorites hotkey on Thinkpad, and Screen LOCK on ASUS. - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been updated to support this. - Few cleanups related to debugfs have been made in Intel IPS and Intel PMC drivers. Besides that Intel PMC has been extended to show more detailed information about Latency Tolerance * tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits) platform/x86: mlx-platform: Convert to use SPDX identifier Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems platform/x86: mlx-platform: Fix LED configuration platform/x86: mlx-platform: Fix tachometer registers platform/x86: mlx-platform: Rename new systems product names platform/x86: mlx-platform: Add definitions for new registers platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE platform/x86: thinkpad_acpi: Cleanup quirks macros platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11 platform/x86: Fix config space access for intel_atomisp2_pm platform/x86: Add the VLV ISP PCI ID to atomisp2_pm platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro platform/x86: intel_ips: Remove never happen condition platform/x86: intel_ips: NULL check before some freeing functions is not needed platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper ACPI / scan: Create platform device for INT3515 ACPI nodes platform/x86: i2c-multi-instantiate: Allow to have same slaves ...

usb: typec: tcpm: Extend the matching rules on PPS APDO selection

2018-12-19T07:13:26Z

Current matching rules ensure that the voltage range of selected Source Capability is entirely within the range defined in one of the Sink Capabilities. This is reasonable but not practical because Sink may not support wide range of voltage when sinking power while Source could advertise its capabilities in relatively wider range. For example, a Source PDO advertising 3.3V-11V@3A (9V Prog of Fixed Nominal Voltage) will not be selected if the Sink requires 5V-12V@3A PPS power. However, the Sink could work well if the requested voltage range in RDOs is 5V-11V@3A. Currently accepted: |--------- source -----| |----------- sink ---------------| Currently not accepted: |--------- source -----| |----------- sink ---------------| |--------- source -----| |----------- sink ---------------| |--------- source -----------------| |------ sink -------| To improve the usability, change the matching rules to what listed below: a. The Source PDO is selectable if any portion of the voltage range overlaps one of the Sink PDO's voltage range. b. The maximum operational voltage will be the lower one between the selected Source PDO and the matching Sink PDO. c. The maximum power will be the maximum operational voltage times the maximum current defined in the selected Source PDO d. Select the Source PDO with the highest maximum power Signed-off-by: Kyle Tso Acked-by: Adam Thomson Reviewed-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name

2018-12-05T09:25:43Z

Since we are going to use the same in Designware USB 3 driver, rename the property to be consistent across the drivers. No functional change intended. Signed-off-by: Andy Shevchenko Cc: Hans de Goede Cc: Guenter Roeck Acked-by: Hans de Goede Acked-by: Guenter Roeck Reviewed-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Create platform device for INT3515 ACPI nodes

2018-12-03T19:40:03Z

The ACPI device with INT3515 _HID is representing a complex USB PD hardware infrastructure which includes several I2C slave ICs. We add an ID to the I2C multi instantiate list to enumerate all I2C slaves correctly. Signed-off-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Reviewed-by: Hans de Goede Acked-by: Heikki Krogerus Acked-by: Rafael J. Wysocki

Merge 4.20-rc4 into usb-next

2018-11-26T06:54:40Z

We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: add support for Cypress CCGx

2018-11-09T17:49:59Z

Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta Acked-by: Heikki Krogerus Signed-off-by: Wolfram Sang

usb: typec: tcpm: charge current handling for sink during hard reset

2018-11-07T12:20:39Z

During the initial connect to a non-pd port, sink would hard reset twice before deeming that the port partner is non-pd. TCPM sets the the charge path to false during the hard reset. This causes unnecessary connects/disconnects of charge path and makes port take longer to charge from the non-pd ports. Avoid this by not setting the charge path to false unless the partner has already identified to be pd capable. When partner is a pd port, set the charge path to false in SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based of CC pull up and resume the charge path when port enters SNK_HARD_RESET_SINK_ON. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Rob Herring Reviewed-by: Heikki Krogerus -------- Changes in V3: Rebase on top of usb-next Changes in V2: Based on feedback of jackp@codeaurora.org - vsafe_5v_hard_reset flag from tcpc_config is removed - Patch only differentiates between pd port partner and non-pd port partner V1 version of the patch is here: https://lkml.org/lkml/2018/9/14/11 Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Do not disconnect link for self powered devices

2018-11-07T12:20:39Z

During HARD_RESET the data link is disconnected. For self powered device, the spec is advising against doing that. >From USB_PD_R3_0 7.1.5 Response to Hard Resets Device operation during and after a Hard Reset is defined as follows: Self-powered devices Should Not disconnect from USB during a Hard Reset (see Section 9.1.2). Bus powered devices will disconnect from USB during a Hard Reset due to the loss of their power source. Tackle this by letting TCPM know whether the device is self or bus powered. This overcomes unnecessary port disconnections from hard reset. Also, speeds up the enumeration time when connected to Type-A ports. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus --------- Version history: V3: Rebase on top of usb-next V2: Based on feedback from heikki.krogerus@linux.intel.com - self_powered added to the struct tcpm_port which is populated from a. "connector" node of the device tree in tcpm_fw_get_caps() b. "self_powered" node of the tcpc_config in tcpm_copy_caps Based on feedbase from linux@roeck-us.net - Code was refactored - SRC_HARD_RESET_VBUS_OFF sets the link state to false based on self_powered flag V1 located here: https://lkml.org/lkml/2018/9/13/94 Signed-off-by: Greg Kroah-Hartman