linux/drivers/usb/typec, branch v5.14

usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running

2021-08-26T12:59:04Z

If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers

2021-08-18T13:59:23Z

Commit a20dcf53ea98 ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo"), stops tcpm_pd_data_request() calling tcpm_handle_vdm_request() when port->nr_snk_vdo is not set. But the VDM might be intended for an altmode-driver, in which case nr_snk_vdo does not matter. This change breaks the forwarding of connector hotplug (HPD) events for displayport altmode on devices which don't set nr_snk_vdo. tcpm_pd_data_request() is the only caller of tcpm_handle_vdm_request(), so we can move the nr_snk_vdo check to inside it, at which point we have already looked up the altmode device so we can check for this too. Doing this check here also ensures that vdm_state gets set to VDM_STATE_DONE if it was VDM_STATE_BUSY, even if we end up with responding with PD_MSG_CTRL_NOT_SUPP later. Note that tcpm_handle_vdm_request() was already sending PD_MSG_CTRL_NOT_SUPP in some circumstances, after moving the nr_snk_vdo check the same error-path is now taken when that check fails. So that we have only one error-path for this and not two. Replace the tcpm_queue_message(PD_MSG_CTRL_NOT_SUPP) used by the existing error-path with the more robust tcpm_pd_handle_msg() from the (now removed) second error-path. Fixes: a20dcf53ea98 ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo") Cc: stable Cc: Kyle Tso Acked-by: Heikki Krogerus Acked-by: Kyle Tso Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210816154632.381968-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events

2021-08-05T10:27:43Z

When receiving FRS and Sourcing_Vbus events from low-level drivers, keep other events which come a bit earlier so that they will not be ignored in the event handler. Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Cc: stable Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Reviewed-by: Badhri Jagan Sridharan Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210803091314.3051302-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes

2021-07-21T07:16:40Z

Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: typec: stusb160x: register role switch before interrupt registration

2021-07-21T07:16:26Z

During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tipd: Don't block probing of consumer of "connector" nodes

2021-07-21T07:10:45Z

Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable Acked-by: Heikki Krogerus Signed-off-by: Martin Kepplinger Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman

usb: typec: Add the missed altmode_id_remove() in typec_register_altmode()

2021-06-17T13:39:33Z

typec_register_altmode() misses to call altmode_id_remove() in an error path. Add the missed function call to fix it. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable Acked-by: Heikki Krogerus Signed-off-by: Jing Xiangfeng Link: https://lore.kernel.org/r/20210617073226.47599-1-jingxiangfeng@huawei.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Relax disconnect threshold during power negotiation

2021-06-17T13:39:14Z

If the voltage is being decreased in power negotiation, the Source will set the power supply to operate at the new voltage level before sending PS_RDY. Relax the threshold before sending Request Message so that it will not race with Source which begins to adjust the voltage right after it sends Accept Message (PPS) or tSrcTransition (25~35ms) after it sends Accept Message (non-PPS). The real threshold will be set after Sink receives PS_RDY Message. Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support") Cc: stable Cc: Badhri Jagan Sridharan Reviewed-by: Badhri Jagan Sridharan Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210616090102.1897674-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Ignore Vsafe0v in PR_SWAP_SNK_SRC_SOURCE_ON state

2021-06-17T13:38:55Z

In PR_SWAP_SNK_SRC_SOURCE_ON state, Vsafe0v is expected as well so do nothing here to avoid state machine going into SNK_UNATTACHED. Fixes: 28b43d3d746b ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: stable Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210615173206.1646477-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: Fix up sink disconnect thresholds for PD

2021-06-17T13:38:37Z

"Table 4-3 VBUS Sink Characteristics" of "Type-C Cable and Connector Specification" defines the disconnect voltage thresholds of various configurations. This change fixes the disconnect threshold voltage calculation based on vSinkPD_min and vSinkDisconnectPD as defined by the table. Fixes: e1a97bf80a022 ("usb: typec: tcpci: Implement Auto discharge disconnect callbacks") Cc: stable Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20210615174323.1160132-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman