linux/drivers/usb/typec, branch v5.15

usb: typec: tcpm: handle SRC_STARTUP state if cc changes

2021-10-05T11:47:00Z

TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state which is not satisfied with the Type-C spec. Per Type-C spec: DRP port should move to Unattached.SNK instead of Unattached.SRC if sink removed. Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20210928111639.3854174-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: don't handle vSafe0V event if it's not enabled

2021-10-05T11:46:46Z

USB TCPCI Spec, 4.4.3 Mask Registers: "A masked register will still indicate in the ALERT register, but shall not set the Alert# pin low." Thus, the Extended Status will still indicate in ALERT register if vSafe0V is detected by TCPC even though being masked. In current code, howerer, this event will not be handled in detection time. Rather it will be handled when next ALERT event coming(CC evnet, PD event, etc). Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V event should not be handled when it's masked. Fixes: 766c485b86ef ("usb: typec: tcpci: Add support to report vSafe0V") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20210926101415.3775058-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tipd: Remove dependency on "connector" child fwnode

2021-10-05T11:46:22Z

There is no "connector" child node available on every platform, so the driver can't fail to probe when it's missing. Fixes: 57560ee95cb7 ("usb: typec: tipd: Don't block probing of consumer of "connector" nodes") Cc: stable@vger.kernel.org # 5.14+ Reported-by: "Regupathy, Rajaram" Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20210930124758.23233-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2021-09-01T16:59:34Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.15-rc1. Nothing huge in here, just lots of constant forward progress on a number of different drivers and hardware support: - more USB 4/Thunderbolt support added - dwc3 driver updates and additions - usb gadget fixes and addtions for new types - udc gadget driver updates - host controller updates - removal of obsolete drivers - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: isp1760: otg control register access usb: isp1760: use the right irq status bit usb: isp1760: write to status and address register usb: isp1760: fix qtd fill length usb: isp1760: fix memory pool initialization usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least" usb: dwc2: Fix spelling mistake "was't" -> "wasn't" usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed" usb: host: xhci-rcar: Don't reload firmware after the completion usb: xhci-mtk: allow bandwidth table rollover usb: mtu3: fix random remote wakeup usb: mtu3: return successful suspend status usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint usb: xhci-mtk: modify the SOF/ITP interval for mt8195 usb: xhci-mtk: add a member of num_esit usb: xhci-mtk: check boundary before check tt usb: xhci-mtk: update fs bus bandwidth by bw_budget_table usb: xhci-mtk: fix issue of out-of-bounds array access usb: xhci-mtk: support option to disable usb2 ports usb: xhci-mtk: fix use-after-free of mtk->hcd ...

Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2021-09-01T15:44:42Z

Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...

usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"

2021-08-27T08:30:13Z

There are spelling mistakes in a comment and a literal string. Fix them. Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20210826123959.14838-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running

2021-08-26T12:59:04Z

If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable Cc: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

Merge 5.14-rc7 into usb-next

2021-08-24T13:21:10Z

We need the USB fix in here as well. Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers

2021-08-18T13:59:23Z

Commit a20dcf53ea98 ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo"), stops tcpm_pd_data_request() calling tcpm_handle_vdm_request() when port->nr_snk_vdo is not set. But the VDM might be intended for an altmode-driver, in which case nr_snk_vdo does not matter. This change breaks the forwarding of connector hotplug (HPD) events for displayport altmode on devices which don't set nr_snk_vdo. tcpm_pd_data_request() is the only caller of tcpm_handle_vdm_request(), so we can move the nr_snk_vdo check to inside it, at which point we have already looked up the altmode device so we can check for this too. Doing this check here also ensures that vdm_state gets set to VDM_STATE_DONE if it was VDM_STATE_BUSY, even if we end up with responding with PD_MSG_CTRL_NOT_SUPP later. Note that tcpm_handle_vdm_request() was already sending PD_MSG_CTRL_NOT_SUPP in some circumstances, after moving the nr_snk_vdo check the same error-path is now taken when that check fails. So that we have only one error-path for this and not two. Replace the tcpm_queue_message(PD_MSG_CTRL_NOT_SUPP) used by the existing error-path with the more robust tcpm_pd_handle_msg() from the (now removed) second error-path. Fixes: a20dcf53ea98 ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo") Cc: stable Cc: Kyle Tso Acked-by: Heikki Krogerus Acked-by: Kyle Tso Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210816154632.381968-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Support non-PD mode

2021-08-13T11:05:51Z

Even if the Type-C controller supports PD, it is doable to disable PD capabilities with the current state machine in TCPM. Without enabling RX in low-level drivers and with skipping the power negotiation, the port is eligible to be a non-PD Type-C port. Use new flags whose values are populated from the device tree to decide the port PD capability. Adding "pd-disable" property in device tree indicates that the port does not support PD. If PD is not supported, the device tree property "typec-power-opmode" shall be added to specify the advertised Rp value if the port supports SRC role. Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Kyle Tso Link: https://lore.kernel.org/r/20210804081917.3390341-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman