linux/drivers/usb/typec, branch v5.17

tps6598x: clear int mask on probe failure

2022-02-17T15:02:27Z

The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter Cc: stable Reviewed-by: Heikki Krogerus Signed-off-by: Jens Axboe Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman

ucsi_ccg: Check DEV_INT bit only when starting CCG4

2022-01-26T12:41:19Z

CCGx clears Bit 0:Device Interrupt in the INTR_REG if CCGx is reset successfully. However, there might be a chance that other bits in INTR_REG are not cleared due to internal data queued in PPM. This case misleads the driver that CCGx reset failed. The commit checks bit 0 in INTR_REG and ignores other bits. The ucsi driver would reset PPM later. Fixes: 247c554a14aa ("usb: typec: ucsi: add support for Cypress CCGx") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus Signed-off-by: Sing-Han Chen Signed-off-by: Wayne Chang Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Do not disconnect when receiving VSAFE0V

2022-01-25T17:41:18Z

With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V causing VSAFE0V to be triggered. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: 28b43d3d746b8 ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20220122015520.332507-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Do not disconnect while receiving VBUS off

2022-01-25T17:41:18Z

With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: Don't try to register component master without components

2022-01-25T17:37:35Z

This fixes NULL pointer dereference that happens if component master is registered with empty component match list. Fixes: 730b49aac426 ("usb: typec: port-mapper: Convert to the component framework") Reported-by: Mikhail Gavrilov Tested-by: John Stultz Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220124090228.41396-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: Only attempt to link USB ports if there is fwnode

2022-01-25T17:37:35Z

The code that creates the links to the USB ports attached to a connector inside the system assumed that the ACPI nodes (fwnodes) always exist for the connectors, but it can not do that. There is no guarantee that every USB Type-C connector has ACPI device node representing it in the ACPI tables, and even if there are the nodes in the ACPI tables, the _STA method in those nodes may still return 0 (which means the device does not exist from ACPI PoW). This fixes NULL pointer dereference that happens if the nodes are missing. Fixes: 730b49aac426 ("usb: typec: port-mapper: Convert to the component framework") Reported-and-tested-by: Robert Święcki Reported-by: Mikhail Gavrilov Tested-by: Marc Zyngier Acked-by: Marc Zyngier Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220124090228.41396-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: don't touch CC line if it's Vconn source

2022-01-25T17:36:51Z

With the AMS and Collision Avoidance, tcpm often needs to change the CC's termination. When one CC line is sourcing Vconn, if we still change its termination, the voltage of the another CC line is likely to be fluctuant and unstable. Therefore, we should verify whether a CC line is sourcing Vconn before changing its termination and only change the termination that is not a Vconn line. This can be done by reading the Vconn Present bit of POWER_ STATUS register. To determine the polarity, we can read the Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be sourced if Plug Orientation is set. Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") cc: Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

Merge 5.16-rc8 into usb-next

2022-01-03T12:02:29Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: typec: port-mapper: Convert to the component framework

2021-12-30T11:13:04Z

Instead of trying to keep track of the connections to the USB Type-C connectors separately, letting the component framework take care of that. From now on every USB Type-C connector will register itself as "aggregate" - component master - and anything that can be connected to it inside the system can then simply register itself as a generic component. The matching of the components and the connector shall rely on ACPI _PLD initially. Before registering itself as the aggregate, the connector will find all other ACPI devices that have matching _PLD crc hash with it (matching value in the pld_crc member of struct acpi_device), and add a component match entry for each one of them. Because only ACPI is supported for now, the driver shall only be build when ACPI is supported. This removes the need for the custom API that the driver exposed. The components and the connector can therefore exist completely independently of each other. The order in which they are registered, as well as are they modules or not, is now irrelevant. Acked-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Only check the contract if there is a connection

2021-12-21T15:30:53Z

The driver must make sure there is an actual connection before checking details about the USB Power Delivery contract. Those details are not valid unless there is a connection. This fixes NULL pointer dereference that is caused by an attempt to register bogus partner alternate mode that the firmware on some platform may report before the actual connection. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215117 Fixes: 6cbe4b2d5a3f ("usb: typec: ucsi: Check the partner alt modes always if there is PD contract") Reported-by: Chris Hixon Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/eb34f98f-00ef-3238-2daa-80481116035d@leemhuis.info/ Link: https://lore.kernel.org/r/20211221140352.45501-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman