linux/drivers/usb/typec, branch v6.2

usb: typec: altmodes/displayport: Fix probe pin assign check

2023-02-09T12:23:39Z

While checking Pin Assignments of the port and partner during probe, we don't take into account whether the peripheral is a plug or receptacle. This manifests itself in a mode entry failure on certain docks and dongles with captive cables. For instance, the Startech.com Type-C to DP dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail the Pin Assignment compatibility check, despite it supporting Pin Assignment C as a UFP. Update the check to use the correct DP Pin Assign macros that take the peripheral's receptacle bit into account. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Reported-by: Diana Zigterman Signed-off-by: Prashant Malani Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Don't attempt to resume the ports before they exist

2023-02-02T10:27:28Z

This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered. Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work") Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697 Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail

2023-01-17T16:09:27Z

There's the altmode re-registeration issue after data role swap (DR_SWAP). Comparing to USBPD 2.0, in USBPD 3.0, it loose the limit that only DFP can initiate the VDM command to get partner identity information. For a USBPD 3.0 UFP device, it may already get the identity information from its port partner before DR_SWAP. If DR_SWAP send or receive at the mean time, 'send_discover' flag will be raised again. It causes discover identify action restart while entering ready state. And after all discover actions are done, the 'tcpm_register_altmodes' will be called. If old altmode is not unregistered, this sysfs create fail can be found. In 'DR_SWAP_CHANGE_DR' state case, only DFP will unregister altmodes. For UFP, the original altmodes keep registered. This patch fix the logic that after DR_SWAP, 'tcpm_unregister_altmodes' must be called whatever the current data role is. Reviewed-by: Macpaul Lin Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Reported-by: TommyYl Chen Cc: stable@vger.kernel.org Signed-off-by: ChiYuan Huang Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/1673248790-15794-1-git-send-email-cy_huang@richtek.com Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Use proper macro for pin assignment check

2023-01-17T16:07:25Z

While looking at the DP configuration VDO to determine the peripheral configuration, the spec (Table 8-5: DisplayPort Configurations, VESA DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP Source/Sink Device". So, use the correct macro while performing this check. Effectively it's the same as the existing code, but the proposed macro describes the state a little better. No functional changes introduced. Cc: Heikki Krogerus Signed-off-by: Prashant Malani Reviewed-by: Benson Leung Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Fix pin assignment calculation

2023-01-17T16:07:25Z

Commit c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") fixed the pin assignment calculation to take into account whether the peripheral was a plug or a receptacle. But the "pin_assignments" sysfs logic was not updated. Address this by using the macros introduced in the aforementioned commit in the sysfs logic too. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus Signed-off-by: Prashant Malani Reviewed-by: Benson Leung Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Add pin assignment helper

2023-01-17T16:07:25Z

The code to extract a peripheral's currently supported Pin Assignments is repeated in a couple of locations. Factor it out into a separate function. This will also make it easier to add fixes (we only need to update 1 location instead of 2). Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus Signed-off-by: Prashant Malani Reviewed-by: Benson Leung Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: ucsi: Ensure connector delayed work items are flushed

2023-01-17T16:06:18Z

During ucsi_unregister() when destroying a connector's workqueue, there may still be pending delayed work items that haven't been scheduled yet. Because queue_delayed_work() uses a separate timer to schedule a work item, the destroy_workqueue() call is not aware of any pending items. Hence when a pending item's timer expires it would then try to queue on a dangling workqueue pointer. Fix this by keeping track of all work items in a list, so that prior to destroying the workqueue any pending items can be flushed. Do this by calling mod_delayed_work() as that will cause pending items to get queued immediately, which then allows the ensuing destroy_workqueue() to implicitly drain all currently queued items to completion and free themselves. Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Suggested-by: Heikki Krogerus Co-developed-by: Linyu Yuan Signed-off-by: Linyu Yuan Signed-off-by: Jack Pham Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-12-16T11:54:54Z

Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...

usb: typec: tipd: Set mode of operation for USB Type-C connector

2022-12-08T15:45:10Z

Forward the mode of operation to the typec subsystem such that it can configure the mux correctly. Reviewed-by: Heikki Krogerus Signed-off-by: Sven Peter Link: https://lore.kernel.org/r/20221128162304.80125-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman

usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()

2022-12-08T15:43:22Z

I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. Fixes: d016cbe4d7ac ("usb: typec: Support the WUSB3801 port controller") Reviewed-by: Heikki Krogerus Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221203071027.3808308-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman