linux/drivers/usb, branch v3.10

USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable

2013-06-19T22:54:45Z

Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: phy: Improve Kconfig help for CONFIG_USB_PHY

2013-06-18T17:39:04Z

The previous text confused users by not describing the very common (e.g. x86 PC) sitations where no PHY driver is necessary. Signed-off-by: George Spelvin Signed-off-by: Greg Kroah-Hartman

usb: chipidea: fix id change handling

2013-06-11T23:18:05Z

Re-enable chipidea irq even if there's no role changing to do. This is a problem since b183c19f ("USB: chipidea: re-order irq handling to avoid unhandled irqs"); when it manifests, chipidea irq gets disabled for good. Cc: stable@vger.kernel.org # v3.7 Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman

usb: chipidea: fix no transceiver case

2013-06-11T23:18:04Z

Since usb phy code does return ERR_PTR() values, make sure that we don't end up dereferencing them. This is a problem, for example, on platforms that don't register a phy for chipidea since b7fa5c2a ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman

USB: pl2303: fix device initialisation at open

2013-06-10T18:00:49Z

Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: spcp8x5: fix device initialisation at open

2013-06-10T18:00:49Z

Do not use uninitialised termios data to determine when to configure the device at open. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: f81232: fix device initialisation at open

2013-06-10T18:00:48Z

Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: option,zte_ev: move most ZTE CDMA devices to zte_ev

2013-06-06T16:06:25Z

Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: option: blacklist network interface on Huawei E1820

2013-06-06T16:02:36Z

The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: whiteheat: fix broken port configuration

2013-06-06T16:02:36Z

When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman