linux/drivers/usb, branch v5.12

usbip: synchronize event handler with sysfs code paths

2021-04-05T07:05:42Z

Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to synchronize event handler with sysfs paths in usbip drivers. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usbip: vudc synchronize sysfs code paths

2021-04-05T07:05:42Z

Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in vudc. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usbip: stub-dev synchronize sysfs code paths

2021-04-05T07:05:42Z

Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in stub-dev. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usbip: add sysfs_lock to synchronize sysfs code paths

2021-04-05T07:05:42Z

Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. This problem is common to all drivers while it can be reproduced easily in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths. Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host and usip-vudc drivers and the event handler will have to use this lock to protect the paths. These changes will be done in subsequent patches. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus

2021-04-05T07:04:41Z

Peter writes: Fixes one issue with dequeuing requests after disabling endpoint for cdnsp udc driver * tag 'v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint

usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint

2021-03-27T00:59:46Z

Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak Signed-off-by: Peter Chen

usb: dwc2: Prevent core suspend when port connection flag is 0

2021-03-26T13:51:34Z

In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.

2021-03-26T13:51:22Z

Increased the waiting timeout for HPRT0.PrtSusp register field to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't generated with the existing timeout. Cc: # 4.18 Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.") Signed-off-by: Artur Petrosyan Acked-by: Minas Harutyunyan Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: musb: Fix suspend with devices connected for a64

2021-03-26T13:50:59Z

Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah . Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah Tested-by: Bhushan Shah Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

2021-03-26T13:50:44Z

The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman